jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 09, 2021, 04:33:13 PM |
|
Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported. You can do it manually directly executing in the bash like: nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &) I get this error Running User Bash commands... The current user does not have permission to change clocks for GPU 00000000:01:00.0. I tryed to... without lucky... it seems in Simpleming you cannot fix the clock :-(
|
|
|
|
DragonFlight
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 09, 2021, 08:59:05 PM |
|
Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported. You can do it manually directly executing in the bash like: nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &) I get this error Running User Bash commands... The current user does not have permission to change clocks for GPU 00000000:01:00.0. I tryed to... without lucky... it seems in Simpleming you cannot fix the clock :-( Found a solution. have to use sudo in front of each command
|
|
|
|
DragonFlight
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 09, 2021, 09:11:30 PM |
|
Question about lolminer (can't find lolminer support on discord btw). Lolminer stats show Shares (A,S,Hw). Assuming A=Accepted, S=Stale, Hw=Hardware error....... i have an issue! I totally have 1 S and 10 Hw errors (miner stats). SMOS shows just 1 share as invalid, but my pool shows 0 invalid for 24 hours and about 0.5% stale shares!!
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 09, 2021, 09:15:17 PM |
|
Question about lolminer (can't find lolminer support on discord btw). Lolminer stats show Shares (A,S,Hw). Assuming A=Accepted, S=Stale, Hw=Hardware error....... i have an issue! I totally have 1 S and 10 Hw errors (miner stats). SMOS shows just 1 share as invalid, but my pool shows 0 invalid for 24 hours and about 0.5% stale shares!!
Which OC do you have?. And which config?... normally Hw errors are related too much OC or bad riser or socket. With nvidia old version 1.24a could happen too
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 09, 2021, 09:24:35 PM |
|
Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported. You can do it manually directly executing in the bash like: nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &) I get this error Running User Bash commands... The current user does not have permission to change clocks for GPU 00000000:01:00.0. I tryed to... without lucky... it seems in Simpleming you cannot fix the clock :-( Found a solution. have to use sudo in front of each command Completely right...sudo is so important
|
|
|
|
DragonFlight
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 09, 2021, 09:25:08 PM |
|
Question about lolminer (can't find lolminer support on discord btw). Lolminer stats show Shares (A,S,Hw). Assuming A=Accepted, S=Stale, Hw=Hardware error....... i have an issue! I totally have 1 S and 10 Hw errors (miner stats). SMOS shows just 1 share as invalid, but my pool shows 0 invalid for 24 hours and about 0.5% stale shares!!
Which OC do you have?. And which config?... normally Hw errors are related too much OC or bad riser or socket. With nvidia old version 1.24a could happen too I don't care if i have many invalids because of overclock........ The problem is that lolminer says that i have invalid shares, but my pool says i have 0 invalids! Just asking what's going on, so i may be usefull to fix lolminer bugs
|
|
|
|
buraz11
Jr. Member
Offline
Activity: 116
Merit: 4
|
|
April 09, 2021, 11:40:17 PM |
|
Invalid shares dont get sent to the pool, stale ones do
|
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 10, 2021, 01:36:59 PM |
|
I don't know if there is a tuning guide to make rx5500xt mine ae or grin32 and i don't know if mine needs overclock or no. The specs are these 1. 2. Try to install MSI Afterburner, from there you will be able to modify the OC... Also the put a screenshot of the error when you try to mine to see if we found the problem
|
|
|
|
demian198
Newbie
Offline
Activity: 25
Merit: 0
|
|
April 10, 2021, 04:39:23 PM Last edit: April 10, 2021, 04:49:29 PM by demian198 |
|
Try to install MSI Afterburner, from there you will be able to modify the OC... Also the put a screenshot of the error when you try to mine to see if we found the problem
Ok so i took 5 screenshots with gpuZ opened to see what happens when i try to mine grin32. 1. https://i.imgur.com/FNylIWV.jpg --> Start miner (as usually it sees vga as gpu0, gpu1 and one of two *threads? not working ). 2. https://i.imgur.com/7sqlRro.jpg --> Crashing gpu0 and call external script. 3. https://i.imgur.com/67nRXgr.jpg --> Miner reports 80W but vga actually use 40W. 4. https://i.imgur.com/8VuYj5k.jpg --> First *thread? start working again, Efficiency per gpu thread climbs to 23,000, gpu clock decrease, memory clock decrease, gpu load is now 3% and gpu power draw 5W, memory load stays in the same levels. 5. https://i.imgur.com/tTTaVZG.jpg --> Card readings show that vga is not doing any task, but memory is at full load and efficiency g/s/kw growing with hashrate. Vga readings will not change even if i let it 8 hours and it will not find any share from now on.
|
|
|
|
Finalsqualo
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 10, 2021, 05:16:17 PM |
|
good evening, I have a problem on minerstat with lolminer.zombie mode autotune gives me an incorrect profile making it go at 10 mhs against the 25 mhs it does on hiveos. On hiveos I solved it by giving the following string https://imgur.com/a/bF2RNQYon minerstat what string should I write in order to give a fixed profile to the zombie? this is how it looks on minerstat http://imgur.com/a/uGgEE3lsorry my bad english
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 10, 2021, 09:53:11 PM |
|
Try to install MSI Afterburner, from there you will be able to modify the OC... Also the put a screenshot of the error when you try to mine to see if we found the problem
Ok so i took 5 screenshots with gpuZ opened to see what happens when i try to mine grin32. 1. https://i.imgur.com/FNylIWV.jpg --> Start miner (as usually it sees vga as gpu0, gpu1 and one of two *threads? not working ). 2. https://i.imgur.com/7sqlRro.jpg --> Crashing gpu0 and call external script. 3. https://i.imgur.com/67nRXgr.jpg --> Miner reports 80W but vga actually use 40W. 4. https://i.imgur.com/8VuYj5k.jpg --> First *thread? start working again, Efficiency per gpu thread climbs to 23,000, gpu clock decrease, memory clock decrease, gpu load is now 3% and gpu power draw 5W, memory load stays in the same levels. 5. https://i.imgur.com/tTTaVZG.jpg --> Card readings show that vga is not doing any task, but memory is at full load and efficiency g/s/kw growing with hashrate. Vga readings will not change even if i let it 8 hours and it will not find any share from now on. Do you have 2 x 5500xt?... let's try to run only 2... could you try to run only 1 with : --devices 0 that should be put it at the end of the line of lolminer.exe
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 11, 2021, 07:42:35 AM |
|
good evening, I have a problem on minerstat with lolminer.zombie mode autotune gives me an incorrect profile making it go at 10 mhs against the 25 mhs it does on hiveos. On hiveos I solved it by giving the following string https://imgur.com/a/bF2RNQYon minerstat what string should I write in order to give a fixed profile to the zombie? this is how it looks on minerstat http://imgur.com/a/uGgEE3lsorry my bad english Try to edit and put it like this:
|
|
|
|
batsonxl
Member
Offline
Activity: 1208
Merit: 27
|
|
April 11, 2021, 08:14:25 AM |
|
@jgonzi Hi How to get 16sols on 470/570 ? Help please. Also please add RVN algo.thanks
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 11, 2021, 09:05:54 AM |
|
@jgonzi Hi How to get 16sols on 470/570 ? Help please. Also please add RVN algo.thanks
The Sol move around 14.5-18.2 Sol... just only to have an idea of the OC preset... not to much stress for the cards... the Red Shares always appears at the beginning but not in the miners log...
|
|
|
|
|
demian198
Newbie
Offline
Activity: 25
Merit: 0
|
|
April 11, 2021, 10:07:15 AM |
|
Try to install MSI Afterburner, from there you will be able to modify the OC... Also the put a screenshot of the error when you try to mine to see if we found the problem
Ok so i took 5 screenshots with gpuZ opened to see what happens when i try to mine grin32. 1. https://i.imgur.com/FNylIWV.jpg --> Start miner (as usually it sees vga as gpu0, gpu1 and one of two *threads? not working ). 2. https://i.imgur.com/7sqlRro.jpg --> Crashing gpu0 and call external script. 3. https://i.imgur.com/67nRXgr.jpg --> Miner reports 80W but vga actually use 40W. 4. https://i.imgur.com/8VuYj5k.jpg --> First *thread? start working again, Efficiency per gpu thread climbs to 23,000, gpu clock decrease, memory clock decrease, gpu load is now 3% and gpu power draw 5W, memory load stays in the same levels. 5. https://i.imgur.com/tTTaVZG.jpg --> Card readings show that vga is not doing any task, but memory is at full load and efficiency g/s/kw growing with hashrate. Vga readings will not change even if i let it 8 hours and it will not find any share from now on. Do you have 2 x 5500xt?... let's try to run only 2... could you try to run only 1 with : --devices 0 that should be put it at the end of the line of lolminer.exe I tried but miner starting with 0.03 g/s and crashes instantly now. I also use lolminer to mine btg and eth and it always starts by recognizing 2 cards instead of 1 and mine with no problems. I really don't know why it crashes when try to mine grin32. I have no issues when mining eth and btg because it's something like seeing a single core cpu with two threads. The sum of the two hashrates reported is the right one. For example while mining btg i get the result : gpu0: 11.2 sol/s and gpu1: 12.2 sol/s with total 23.4 sol/s which seems ok and i have no errors at all. The same happens when i mine ethereum and no problems here also. The sum is ok but seems like splitting one process in two threads. In device manager, gpuZ and Hwinfo64 it seems as one vga but with 2 uvd clocks with other frequencies (uvd1:330, uvd2:316). The issue is not generic but only happens when try to mine grin32.
|
|
|
|
batsonxl
Member
Offline
Activity: 1208
Merit: 27
|
|
April 11, 2021, 11:28:52 AM |
|
@jgonzi Hi How to get 16sols on 470/570 ? Help please. Also please add RVN algo.thanks
The Sol move around 14.5-18.2 Sol... just only to have an idea of the OC preset... not to much stress for the cards... the Red Shares always appears at the beginning but not in the miners log... thanks
|
|
|
|
v1tru
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 12, 2021, 02:44:51 PM |
|
Hi, I've got a 6900xt but when I start lolminer it says "Radeon 6800 series".
Hashrate reported is 58.70 circa, which seems a bit low...
Something wrong?
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
April 13, 2021, 02:44:36 PM |
|
no OpenCL no fun: EDIT: system with one Nvidia 1080ti Could you try the new Version 1.26? To see if solves that problem?
|
|
|
|
|