lolMiner 1.64: Fastest Kaspa miner in market

[Akyboy]

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:



For some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.

[1714756185]

1714756185

[1714756185]

1714756185

[1714756185]

1714756185

[parple]

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:
https://i.imgur.com/eAvnjfy.png


For some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.

You should lock the core clock rather than using PL.  If you using windows in the .bat file add '--cclk 1110' to extraparameters and it will lock the core.  Set the memory speed to 1100 (I recommend MSI Afterburner in Windows) or 2200 in HiveOS and it should get you good results.  You'll then need to work out the best memory overclock as it will depend on the card. 
I have 2 3070s running in HiveOS with the core at 1110 and memory 2500 (That's about 1250 in windows) and I get just over 61MH/s with Eth and 1.1GH/s on TON with power usage around 140watts according to the software. 
Adding a higher core clock might improve the TON speed but will also increase the power usage.
When mining Eth and TON make sure to restart the miner after applying any new overclocks.
Hope this helps.

[oleghikaro]

Lolminer refuses to connect to nicehash pools, dont know why, other pools like ethermine or 2miners work good, but nicehash doesnt. Can anyone help?

UPD:

Miner crashes after 30-40~ mins after running.

Last message from cmd is always like this:

Ton pool connection mode: https job polling (ton-miner compatible) (--ton-mode 1)
DNS over HTTPS resolve succeeded
Press any key to continue...

[igotek]

Asus Minnig Edition P106-100 6GB

The Latest HiveOs Version 0.6-213@220209
NVIDIA DRIVER VERSION: 495.46

It mines only ETH. I doesnt mine TON. lolminer v143.
There is no error messages. I m sure flight sheet setting are ok. I use the same fligh sheet on my other rigs.

It mines ETH + TON with lolminer v1.44 but the hashrate is so low.

It mines only TON very well with daniella miner. Could you advise me what should I try ?

Code:

New job received: 0xba3ee7 Epoch: 472 Difficulty: 4.30G 
Ethash: Average speed (10s): 22.60 Mh/s | 22.39 Mh/s | 22.55 Mh/s | 22.40 Mh/s | 21.96 Mh/s | 21.26 Mh/s | 22.87 Mh/s | 23.32 Mh/s | 22.89 Mh/s | 21.16 Mh/s | 22.57 Mh/s | 23.04 Mh/s Total: 268.99 Mh/s
SHA256-TON: Average speed (10s): 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s Total: 0.00 Mh/s
New job received: 0x69d85b Epoch: 472 Difficulty: 4.30G 
New job received: 0x0701df Epoch: 472 Difficulty: 4.30G 
GPU 7: Found a share of difficulty 24.57G 
GPU 7: Share accepted (53 ms) 
New job received: 0xf74219 Epoch: 472 Difficulty: 4.30G 
New job received: 0xb45b41 Epoch: 472 Difficulty: 4.30G 
New job received: 0x391f80 Epoch: 472 Difficulty: 4.30G 
Ethash: Average speed (10s): 22.64 Mh/s | 22.39 Mh/s | 22.54 Mh/s | 22.40 Mh/s | 21.96 Mh/s | 21.26 Mh/s | 22.86 Mh/s | 23.29 Mh/s | 22.87 Mh/s | 21.15 Mh/s | 22.57 Mh/s | 23.03 Mh/s Total: 268.96 Mh/s
SHA256-TON: Average speed (10s): 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s Total: 0.00 Mh/s
New job received: 0x4bfee7 Epoch: 472 Difficulty: 4.30G 
New job received: 0xc977f8 Epoch: 472 Difficulty: 4.30G 
New job received: 0xdaff93 Epoch: 472 Difficulty: 4.30G 
New job received: 0x99e12b Epoch: 472 Difficulty: 4.30G 
Ton job with difficulty 400.00G and giver kf9iWhwk9GwAXjtwKG-vN7rmXT3hLIT23RBY6KhVaynRrIK7 received.
New job received: 0xadef3f Epoch: 472 Difficulty: 4.30G 
New job received: 0x8061cb Epoch: 472 Difficulty: 4.30G 
New job received: 0xb5faf6 Epoch: 472 Difficulty: 4.30G 
--------------------------------------------- 
Statistics (18:50:05); Uptime: 0h 2m 5s 
Algorithm 1: Ethash 
Connected to: eu1.ethermine.org:4444 (51ms latency) 
Algorithm 2: SHA256-TON 
Connected to: wss://pplns.toncoinpool.io/stratum:443 (119ms latency) 

       Name      Speed    Pool  Shares   Best    Eff.  Speed  Pool
                  Mh/s    Mh/s  A/S/Hw  Share  Mh/s/W   Mh/s  Mh/s
GPU 0  P106-100  22.63   34.36   1/0/0  29.1G   0.239   0.00  0.00
GPU 1  P106-100  22.39   34.36   1/0/0  13.6G   0.237   0.00  0.00
GPU 2  P106-100  22.56    0.00   0/0/0    0.0   0.236   0.00  0.00
GPU 3  P106-100  22.41    0.00   0/0/0    0.0   0.236   0.00  0.00
GPU 4  P106-100  21.96   34.36   1/0/0   5.5G   0.231   0.00  0.00
GPU 5  P106-100  21.26    0.00   0/0/0    0.0   0.224   0.00  0.00
GPU 6  P106-100  22.88   34.36   1/0/0  53.1G   0.239   0.00  0.00
GPU 7  P106-100  23.31   34.36   1/0/0  24.6G   0.245   0.00  0.00
GPU 8  P106-100  22.91   68.72   2/0/0  24.5G   0.245   0.00  0.00
GPU 9  P106-100  21.15   34.36   1/0/0   9.5G   0.223   0.00  0.00
GPU 10 P106-100  22.60   34.36   1/0/0   5.2G   0.238   0.00  0.00
GPU 11 P106-100  23.05    0.00   0/0/0    0.0   0.244   0.00  0.00
--------------------------- 
Total           269.10  309.24   9/0/0  53.1G   0.236   0.00  0.00

         Shares   Best    Eff.   Power  CCLK  MCLK  Core  Fan
         A/S/Hw  Share  Mh/s/W       W   MHz   MHz  Temp  Pct
GPU 0     0/0/0    0.0   0.000    94.3  1911  4374    49   90
GPU 1     0/0/0    0.0   0.000    93.9  1949  4252    53   95
GPU 2     0/0/0    0.0   0.000    95.2  1923  4498    53   86
GPU 3     0/0/0    0.0   0.000    94.3  1898  4498    56   94
GPU 4     0/0/0    0.0   0.000    94.6  1961  4176    52   71
GPU 5     0/0/0    0.0   0.000    94.3  1999  4050    50   72
GPU 6     0/0/0    0.0   0.000    95.4  1961  4428    50   74
GPU 7     0/0/0    0.0   0.000    94.5  1987  4482    53   74
GPU 8     0/0/0    0.0   0.000    93.2  1949  4498    49   68
GPU 9     0/0/0    0.0   0.000    94.5  1999  4032    50   65
GPU 10    0/0/0    0.0   0.000    94.3  1923  4498    51   95
GPU 11    0/0/0    0.0   0.000    94.1  1974  4404    50   66
--------------------------- 
Total     0/0/0    0.0   0.000  1132.7                       
--------------------------------------------- 
Ethash: Average speed (10s): 22.64 Mh/s | 22.39 Mh/s | 22.53 Mh/s | 22.39 Mh/s | 21.96 Mh/s | 21.26 Mh/s | 22.85 Mh/s | 23.28 Mh/s | 22.87 Mh/s | 21.15 Mh/s | 22.56 Mh/s | 23.03 Mh/s Total: 268.91 Mh/s
SHA256-TON: Average speed (10s): 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s Total: 0.00 Mh/s
New job received: 0x643ba5 Epoch: 472 Difficulty: 4.30G 
New job received: 0x42938b Epoch: 472 Difficulty: 4.30G 
New job received: 0x0bb86f Epoch: 472 Difficulty: 4.30G 
New job received: 0xbcd1f7 Epoch: 472 Difficulty: 4.30G 
New job received: 0xc57b98 Epoch: 472 Difficulty: 4.30G 
New job received: 0x89ff3a Epoch: 472 Difficulty: 4.30G 
Ethash: Average speed (10s): 22.63 Mh/s | 22.39 Mh/s | 22.53 Mh/s | 22.38 Mh/s | 21.96 Mh/s | 21.26 Mh/s | 22.85 Mh/s | 23.27 Mh/s | 22.86 Mh/s | 21.16 Mh/s | 22.56 Mh/s | 23.01 Mh/s Total: 268.85 Mh/s
SHA256-TON: Average speed (10s): 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s | 0.00 Mh/s Total: 0.00 Mh/s
GPU 5: Found a share of difficulty 11.52G 
GPU 5: Share accepted (62 ms) 
New job received: 0x86f2cf Epoch: 472 Difficulty: 4.30G 
New job received: 0x745a09 Epoch: 472 Difficulty: 4.30G 
GPU 0: Found a share of difficulty 20.60G 
GPU 0: Share accepted (52 ms) 
New job received: 0x5f88aa Epoch: 472 Difficulty: 4.30G 
New job received: 0x4f6c64 Epoch: 472 Difficulty: 4.30G 

[Akyboy]

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:



For some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.

You should lock the core clock rather than using PL.  If you using windows in the .bat file add '--cclk 1110' to extraparameters and it will lock the core.  Set the memory speed to 1100 (I recommend MSI Afterburner in Windows) or 2200 in HiveOS and it should get you good results.  You'll then need to work out the best memory overclock as it will depend on the card. 
I have 2 3070s running in HiveOS with the core at 1110 and memory 2500 (That's about 1250 in windows) and I get just over 61MH/s with Eth and 1.1GH/s on TON with power usage around 140watts according to the software. 
Adding a higher core clock might improve the TON speed but will also increase the power usage.
When mining Eth and TON make sure to restart the miner after applying any new overclocks.
Hope this helps.

Thanks a lot for the help!

If you can please clarify some things for me as I am confused a little
When I lock --1110, does that mean that in Afterburner I can leave PL @ 100%?
Whatever memory clock I put in Afterburner, anywhere from 1000-1200 I get DAG verification failing , can i prevent failed dags somehow? (it's not biggie on the single test card I am working on, but on a rig of 10 cards this can take a bit of time to do the auto repair)

[parple]

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?


Thanks

Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:
https://i.imgur.com/eAvnjfy.png


For some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.

You should lock the core clock rather than using PL.  If you using windows in the .bat file add '--cclk 1110' to extraparameters and it will lock the core.  Set the memory speed to 1100 (I recommend MSI Afterburner in Windows) or 2200 in HiveOS and it should get you good results.  You'll then need to work out the best memory overclock as it will depend on the card.  
I have 2 3070s running in HiveOS with the core at 1110 and memory 2500 (That's about 1250 in windows) and I get just over 61MH/s with Eth and 1.1GH/s on TON with power usage around 140watts according to the software.  
Adding a higher core clock might improve the TON speed but will also increase the power usage.
When mining Eth and TON make sure to restart the miner after applying any new overclocks.
Hope this helps.

Thanks a lot for the help!

If you can please clarify some things for me as I am confused a little
When I lock --1110, does that mean that in Afterburner I can leave PL @ 100%?
Whatever memory clock I put in Afterburner, anywhere from 1000-1200 I get DAG verification failing , can i prevent failed dags somehow? (it's not biggie on the single test card I am working on, but on a rig of 10 cards this can take a bit of time to do the auto repair)

Yeah lock the core to 1110 and leave the power limit at 100%.  Locking the core drops the power usage.
If you're getting DAG errors it's normally caused by the memory overclock.  You could try setting the memory overclock with afterburner right after the DAG for ETH is created.
I use HiveOS and with that you can set a delay before the overclocks are applied.

[Akyboy]

Yeah lock the core to 1110 and leave the power limit at 100%.  Locking the core drops the power usage.
If you're getting DAG errors it's normally caused by the memory overclock.  You could try setting the memory overclock with afterburner right after the DAG for ETH is created.
I use HiveOS and with that you can set a delay before the overclocks are applied.

Wow, you made it so simple now! Thanks alot!

Edited afterburner cfg file with:
[Settings]
StartupDelay=60000

DAG verifies with no errors

Now this miner with 7 3070s running 60.2Mhs ETH and 1.08Ghs TON , power 140-162w , cclck 1110 set in bat as advised, memory 1200 in Afterburner on all cards, PL 100%

I had to run miner with admin privileges to get cclk working.

I am trying to use cclock on another miner as well, but for some reason i cannot get miner to run as admin, no matter what i try. (posted it in gminer forum)

[igotek]

I saw 5 defect segment(s) warning on dag verification progress while mining eth+ton.
What is it ? What should I do to fix it ?

the warning is gone after i used lower MEMORY value.


What is the wrong with some gpus ?
Some of them has too low TON hashrates.
The memory values are set to maximum without defect segments error.

Rig 1:


Rig 2:

[ccplz]

My 3060s will either start at 150 mh/s or 750 mh/s ton hashrate. It's completely random, turning off the miner and running it again is pointless. Some times the 1st one will start at full speed, after the miner restart the 2nd one will, after some restarts they will both start at 150, and maybe after a shitton of restarts both will start with full speed. This is without tampering with OC at all. I've done extensive testing these past few days and this shit is so random, it happens on every pool and it only happens with ETH+TON dual mining. I'm running w10 but maybe the miner has the same issue on hiveOS.

[pit63]

My 3060s will either start at 150 mh/s or 750 mh/s ton hashrate. It's completely random, turning off the miner and running it again is pointless. Some times the 1st one will start at full speed, after the miner restart the 2nd one will, after some restarts they will both start at 150, and maybe after a shitton of restarts both will start with full speed. This is without tampering with OC at all. I've done extensive testing these past few days and this shit is so random, it happens on every pool and it only happens with ETH+TON dual mining. I'm running w10 but maybe the miner has the same issue on hiveOS.

Same problem here on hiveos with 3070 and 3060 TI, sometimes i get great hash 1.5gh/1.8gh, when i reboot i got 0.4/0.6gh. Completely random!!!!

SO i must reboot 4/5 times to get full hash!!!!

[impactfiesta]

Hello, first of all excuse my English. I'm new here and I've been testing dual mining these days with lolminer and a 3060ti lhr.
The thing is that I configure the bat and modify the memory with the msi afterburn, but after a few seconds it detects the lhr and stops.
I've tried several configurations, but I can't find a solution. I can't cclk it from the lolminer bat either, I have to do it with a separate bat.

I don't know what I'm doing wrong, I use windows 10 and the drivers are 472.12.

how can I solve that? Thanks a lot.

[waywoos2]

what is the command to put the fans at a desired speed?
thanks

[alucard20724]

@Lolliedieb

--maxdualimpact 0,0,,,, does not work.  the only gpu that dual mines with that command is the last gpu.  gpu 0-4 only mines eth, while gpu 5 mines eth+ton.  it's a 6gpu rig with only 3070.

i'm using SMOS with lol version 1.44

update:
it appear that everything after the last comma in --maxdualimpact 0,0,,,, will dual mine.

i.e.
if i have --maxdualimpact 0,0,, in a 6 gpu system, the last three gpus will dual mine.
if i have --maxdualimpact 0,0, in a 6 gpu system, the last four gpus will dual mine.

hope this helps.

[oleghikaro]

Yes, just only use another pool like ton-pool.com or toncoinpool.io, that is the big problem, the block of cloudfare from tonwhales.com

Answering to that. My problem isn't in TON mining imo.

I've tried but lolminer refuses to connect to nicehash pools as I've said before. I'm a bit new to the mining, I've been here and there for a couple months so I wanna know, what's happening.
Here's the code, when I'm trying to set usual pool addresses:

Code:

Error: Your input to --pool "nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353" can not be split into a address and a port. Please use format <pool address>:<pool port>.

I think that this error might come from this particular miner, because before I've used NBminer.

[parple]

@Lolliedieb

--maxdualimpact 0,0,,,, does not work.  the only gpu that dual mines with that command is the last gpu.  gpu 0-4 only mines eth, while gpu 5 mines eth+ton.  it's a 6gpu rig with only 3070.

i'm using SMOS with lol version 1.44

update:
it appear that everything after the last comma in --maxdualimpact 0,0,,,, will dual mine.

i.e.
if i have --maxdualimpact 0,0,, in a 6 gpu system, the last three gpus will dual mine.
if i have --maxdualimpact 0,0, in a 6 gpu system, the last four gpus will dual mine.

hope this helps.

I think you need to add an * for the other cards.
Try this:
--maxdualimpact 0,0,*,*,*,*

[alucard20724]

@Lolliedieb

--maxdualimpact 0,0,,,, does not work.  the only gpu that dual mines with that command is the last gpu.  gpu 0-4 only mines eth, while gpu 5 mines eth+ton.  it's a 6gpu rig with only 3070.

i'm using SMOS with lol version 1.44

update:
it appear that everything after the last comma in --maxdualimpact 0,0,,,, will dual mine.

i.e.
if i have --maxdualimpact 0,0,, in a 6 gpu system, the last three gpus will dual mine.
if i have --maxdualimpact 0,0, in a 6 gpu system, the last four gpus will dual mine.

hope this helps.

I think you need to add an * for the other cards.
Try this:
--maxdualimpact 0,0,*,*,*,*

That worked.. thanks.  I was just following his example. i'm not a programmer 

[waywoos2]

Anyone know why my one rig won’t get a ton share with dual mining.  I registered with rob whales and my 690xt shows shares.
And I basically copied the same folder to my other rig. 
Shows I have 5000 mhs but after hours no shares in the lolminer window.

i get address is registered and valid. just on shares on ton
eth works good

[impactfiesta]

Hello, first of all excuse my English. I'm new here and I've been testing dual mining these days with lolminer and a 3060ti lhr.
The thing is that I configure the bat and modify the memory with the msi afterburn, but after a few seconds it detects the lhr and stops.
I've tried several configurations, but I can't find a solution. I can't cclk it from the lolminer bat either, I have to do it with a separate bat.

I don't know what I'm doing wrong, I use windows 10 and the drivers are 472.12.

how can I solve that? Thanks a lot.

I have managed to mine in dual ETH+TON using version 1.44, but after a few hours mining TON goes from 1.19 Gh/s to 800 or even less, I have to restart the miner to return the hash, does anyone have the same problem?

[MegaVlad]

Hi.

Is it possible to use memory tweaks for 1080Ti in LoLMiner (Linux)?
Something like --mt or similar?

Thank you in advance.

[parple]

This miner is terrible at detecting the correct LHR or non-LHR cards. Why not have a command to let miner knows which card is which?

You can with --mode

https://github.com/Lolliedieb/lolMiner-releases/wiki/Nvidia-Mode-Switch-%26-LHR-Semi-Unlock