GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[deedeeranged]

I was wondering what the issue this could be:

https://imgur.com/a/veHfz2k

My miner runs fine for over a day and then for some reason I get this error and miner ends up freezing and I have to do a hard reset for my rig.

Rig is running on latest AMD, Nvidia drivers, on Windows 11. Gminer 2.7. What could this issue be?

Your on flexpool see previous answers in this thread. I have a suspicion something might have changed/issues at flexpool try with another pool to see if it is that.

[1715531589]

1715531589

[1715531589]

1715531589

[bartjeyayo]

Is it possible to let the miner reboot the system if miner gets 100 invalid shares?
Sometimes my miner can run for weeks without a problem, and all for sudden all cards give 100% invalid shares. If i then reboot the system it will run for weeks again.

[Zminer777]

GMiner v2.71 available for download

v2.71
+ Improved LHR performance, added two modes (--lhr_mode): 0 - energy save mode, 1 - maximal performance mode (default).
  Miner display LHR unlock percentage in statistics table (LHR row), you can adjust it by --lhr_tune option.
  Now --lhr_tune meaning GPU unlock percentage, for compatibility lhr tunes below 10 mapped to new default values.
  If LHR auto-tune (--lhr_autotune) enabled miner tries increase LHR unlock percentage while mining.
+ Improved RavenCoin performance, fixed floating hashrate
+ Display maximum difficulty of shares for each GPU

Ethash fee is 0.65%
KAWPOW fee is 1%

[questen]

over time reduces physical memory, video cards 6700xt and 5700xt, 4 GB installed

[miner29]

over time reduces physical memory, video cards 6700xt and 5700xt, 4 GB installed

Maybe if you run Winblows….Linux dosnt suffer such problems.

[willi9974]

GMiner v2.72 available for download


v2.72
+ Improved LHR performance, added two modes (--lhr_mode): 0 - energy save mode, 1 - maximal performance mode (default).
  Miner display LHR unlock percentage in statistics table (LHR row), you can adjust it by --lhr_tune option.
  Now --lhr_tune meaning GPU unlock percentage, for compatibility lhr tunes below 10 mapped to new default values.
  If LHR auto-tune (--lhr_autotune) enabled miner tries increase LHR unlock percentage while mining.
+ Improved RavenCoin performance, fixed floating hashrate
+ Display maximum difficulty of shares for each GPU

Ethash fee is 0.65%
KAWPOW fee is 1%

Do not download
LINK TEXT and LINK ARE DIFFERENT

@MOD, if you delete the fucking post from yuvikaa you can delete or edit my posting also (avoid to share the fake link)

Code:

Download: [url=https://github.com/develsoftware-Team/GMinerRelease/releases/download/2.71/gminer_2_72_windows64.zip]https://github.com/develsoftware/GMinerRelease/releases/download/2.72/gminer_2_72_windows64.zip[/url]

[questen]

over time reduces physical memory, video cards 6700xt and 5700xt, 4 GB installed

Maybe if you run Winblows….Linux dosnt suffer such problems.

HIVE OS

[Zminer777]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

[zertor]

This version v2.72 is bugged,
edit: retrying another time, it start working fine this time.

[dedizonesv2]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

Ergo Planned ?

Thanks

[doctorman]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

we need GPU names like T-Rex  please
makes it much easier to adjust the multi GPU rigs

[dedizonesv2]

New update https://github.com/develsoftware/GMinerRelease/releases

2.73 Latest
added LHR mode support for RTX 3060 GA104
added option to control LHR tune step size (--lhr_autotune_step)
added watchdog mode: reboot system or restart miner (--watchdog_mode)
added option to observe rig speed, miner quits if average speed reached limit (--min_rig_speed)
added option to control maximal number of parallel DAG generations (--dag_gen_limit)
display IP address of pool in statistics report
restore overclocking after stopping of mining

BUT it is always difficult to have a stable card especially the 3080Ti..

--dag_gen_limit option

should generate better quality DAG without error

[webhead]

problem why do i get rtx3070ti out of memory when trying to mine cortex my rtz3060 starts up but not my 3070ti,s ?

[nosidefcp]

i wanna ditch teamredminer so bad but i cant reach the results on gminer for a single 5700 i have left. any special settings/configs for hive? its my last card on teamredmienr, all the others are working perfect on gminer

[rangefinder]

Any chance you could lower the dev fee on Cortex CTXC, or keep working on it to improve hashrate? I don't remember the last time something changed about CTXC miner.
5% is so much even if you have no competitors out there. Pls let Cortex miners have some love. 

[webhead]

does gminer support rtx3070ti because it wont start on my cards.

[DragonbornSoulI]

Hi, i am interested which ports and pools are used for dev fee. Need that info to open them for use. Anyone can help me?
Most of the software has hardware requrements. Will be very nice to publish or write Gminer requirements in readme file or in github. Miners should know if they block some of the developer fee servers, ports, links or something else as ports which are important for work of Gminer.  It will cost nothing to publish them and it my help to some miners to get rid off troubles or problems. Hope developers can do it for miners. I would do it if i was a developer.   ;)
Problem. - - - - - Discord link for joining on Gminer site not working.    

[ayiphelmy]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

[deedeeranged]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases.

[ayiphelmy]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases.

its fix for cortex?