Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
October 29, 2014, 07:32:23 AM |
|
Installed minera on my raspy, works good so far. I only have one problem:
Very often, a pool gets declared dead, although the pool works fine. Rebooting the system, restarting the miner, both doesn't help. Happens with many different pools.
What's the problem?
Have the same problem. One installation doesn't work with NiceHash, the other does.
|
|
|
|
Meije
|
|
October 29, 2014, 10:46:10 AM |
|
Hello everyone,
I just bought my first raspberry pi that i want to use with minera, unfortunately i have only access to wifi, but i can't find anything to help me setup minera with wifi. I am completely new with working with raspberry pi so i have no idea what to do, can anybody tel me how i set this up?. I intend to load the .img file via the SD card method, is this possible with wifi?
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
October 29, 2014, 12:23:33 PM |
|
You'll have to get the img on the sd card, then follow instructions as per somewhere in the last few pages of this topic on activating wifi.
|
|
|
|
Meije
|
|
October 29, 2014, 12:29:43 PM |
|
You'll have to get the img on the sd card, then follow instructions as per somewhere in the last few pages of this topic on activating wifi.
i have seen the last few pages, but how can i SSH in a terminal to the raspberry if the wifi adapter does not work?, do i first have to connect it with a cable?
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
October 29, 2014, 02:04:37 PM |
|
You'll have to get the img on the sd card, then follow instructions as per somewhere in the last few pages of this topic on activating wifi.
i have seen the last few pages, but how can i SSH in a terminal to the raspberry if the wifi adapter does not work?, do i first have to connect it with a cable? You'll have to set it up first, or connect a monitor/keyboard and work magic locally.
|
|
|
|
tunth
|
|
November 02, 2014, 10:01:00 PM |
|
Hi, i have 5 gridseeds pots running with hashra controlla. And i wanted to try this 1, like the graphics. But i have a problem, it is that i can't change the settings, the preconfigured settings keep comming back, after i change it to my pool, after clicking on save and restart. Do i need to do something else, before i can change it? It also upgraded to the newest version. Thanks
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2688
Merit: 1030
Yes I am a pirate, 300 years too late!
|
|
November 02, 2014, 10:19:55 PM |
|
Hi, i have 5 gridseeds pots running with hashra controlla. And i wanted to try this 1, like the graphics. But i have a problem, it is that i can't change the settings, the preconfigured settings keep comming back, after i change it to my pool, after clicking on save and restart. Do i need to do something else, before i can change it? It also upgraded to the newest version. Thanks
After you make your settings, and hit save, it takes you down to the MobileMiner settings, clear the E-Mail name out and then save.
|
|
|
|
I_IZ_CEO
Sr. Member
Offline
Activity: 308
Merit: 250
CEO FlawMiners TM®
|
|
November 03, 2014, 05:54:47 AM |
|
On the 1st page or the website, would it be possible to put information for miner "Extra options"
I am using CGMiner DMax and it is working fine for my Blizzards (and I love Minera) with: --scrypt --scan-serial zeus:auto --zeus-chips 6 --zeus-clock 328 --no-submit-stale
A friend asked me to help her with the settings for BFGMiner and I told her to use: --set zus:chips=6 --set zus:freq=328 -d zus -S zus:all and it would not work.
She also tried to use the options from the DMax on CGMiner 4.x and it did not work. I do now know if they are different.
Any info would be helpful.
Thanks
|
|
|
|
nwoolls
|
|
November 03, 2014, 05:58:04 AM |
|
A friend asked me to help her with the settings for BFGMiner and I told her to use: --set zus:chips=6 --set zus:freq=328 -d zus -S zus:all and it would not work.
The proper arguments for BFGMiner are: --scrypt -S zus:all --set zus:chips=6 --set zus:clock=328
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
I_IZ_CEO
Sr. Member
Offline
Activity: 308
Merit: 250
CEO FlawMiners TM®
|
|
November 03, 2014, 06:05:43 AM |
|
A friend asked me to help her with the settings for BFGMiner and I told her to use: --set zus:chips=6 --set zus:freq=328 -d zus -S zus:all and it would not work.
The proper arguments for BFGMiner are: --scrypt -S zus:all --set zus:chips=6 --set zus:clock=328 Wow awesome software and awesome team/dev'. Thank you very much Nwolls, that was epic help and fast!
|
|
|
|
tunth
|
|
November 03, 2014, 10:58:28 AM |
|
Hi, i have 5 gridseeds pots running with hashra controlla. And i wanted to try this 1, like the graphics. But i have a problem, it is that i can't change the settings, the preconfigured settings keep comming back, after i change it to my pool, after clicking on save and restart. Do i need to do something else, before i can change it? It also upgraded to the newest version. Thanks
After you make your settings, and hit save, it takes you down to the MobileMiner settings, clear the E-Mail name out and then save. Hi, thanks that helped But still have a problem, to get these pods working. Which miner is best to use? And which settings to use?
|
|
|
|
partytime_luz
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 04, 2014, 03:23:17 AM Last edit: November 04, 2014, 04:31:58 AM by partytime_luz |
|
I've been struggling and searching forums trying get some help, I have a GAW Falcon and 3x GAW Furrys, I have them connected to my Rap. Pi with Minera 3.8 running using CGminer DMAX Zeus Fork. I'm trying to achieve all 4 devices working together. I've been playing around with extra options and I can get the Furrys to has properly or I can get the Falcon to has properly, but not together. Has anyone achieved this?
The closest I've come to getting them working "OK" is using this argument:
"--zeus-chips 6 --zeus-clock 340 --no-submit-stale --failover-only --failover-switch-delay 10"
But I'm sure there is a way to configure each USB device individually?
Multipool is reporting 29-30MHS which is pretty close, but the Minera Dashboard shows my Falcon bouncing all over the place 130MHs to 500MHs to 1GH
Please reply if you have suggestions!
|
|
|
|
Meije
|
|
November 04, 2014, 04:37:46 PM |
|
Hi guys!, I flashed Minera onto the SD card, but it asks me for Login and Password credentials, i do not know them, and can't find them anywhere, am i doing something wrong?
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
November 04, 2014, 04:43:05 PM |
|
Hi guys!, I flashed Minera onto the SD card, but it asks me for Login and Password credentials, i do not know them, and can't find them anywhere, am i doing something wrong?
You have to browse Minera from your browser: http://<your-minera-ip>/minera/ Login everywhere is minera/minera
|
|
|
|
Meije
|
|
November 04, 2014, 04:54:38 PM |
|
I have logged in locally using a screen, but i have no wifi, i used sudo wicd-curses to find my network, but it doesn't find anything.
Never mind, i had to change the adapter to wlan0
|
|
|
|
fragar10
Newbie
Offline
Activity: 22
Merit: 0
|
|
November 04, 2014, 11:01:22 PM |
|
I am having a problem with Minera failing over to other pools. Sometimes it gets hung between pools. This happens when it is changing to a higher priority pool. Like from pool 3 to pool 1. I have to restart the miner to make it change pools.I am running a Rasp PI and ver 3.8.
|
|
|
|
I_IZ_CEO
Sr. Member
Offline
Activity: 308
Merit: 250
CEO FlawMiners TM®
|
|
November 05, 2014, 05:12:06 AM |
|
I am having a problem with Minera failing over to other pools. Sometimes it gets hung between pools. This happens when it is changing to a higher priority pool. Like from pool 3 to pool 1. I have to restart the miner to make it change pools.I am running a Rasp PI and ver 3.8.
I had this problem too, what I did was formatted the card and re-installed Minera on it, so far not 1 problem even when I switch pools. Hope it helps.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
November 05, 2014, 10:47:58 PM |
|
Well, I guess it's time I update my Minera as my R-Pi running 3.5 will no longer stay running...the problems just started in the last 24 hours and no changes were made to my config or the miner. Just out of the blue!
|
|
|
|
IMJim
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
November 05, 2014, 10:50:46 PM |
|
I've been running Minera on 16 sets of Gridseeds for a while now and also am noticing a bit more problems than before. Seems I have about 1 set per day that just goes offline, have to power cycle the set to get them back up. This has been happening for about the last 2-3 weeks I would say, not too big of a deal as I try to monitor them closely anyways but definitely something a bit buggy with the latest releases it seems.
|
|
|
|
Blackross
Newbie
Offline
Activity: 53
Merit: 0
|
|
November 05, 2014, 11:42:06 PM |
|
ok im getting a little pissed.... the donation is diabled, but yet it seems to activate and run...
pool: stratum+tcp://ca.simplemulti.com:3333
address: VqSPcvUXVc2tg9sFSKHS8kKGNNZXYTG5sx.2
and push everything else out.... and NO matter what i try or do it keeps popping back up, and pushing my pools and info out of the way.
getting really frustrated.
i dont remember this as the default donation pool or info, if its not, you need to check your git.
|
|
|
|
|