[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[michelem]

This is a typical case I need to investigate, please can you point your browser here:

Code:

http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats

And send me the results? PM is good. Many thanks

here you go
api.json.txt

Well, it seems everything good, the calculations are right as the RPC API data sent from CGminer. I don't want there is some problems with cgminer itself. Did you try BFGminer?

[G1rr]

This is a typical case I need to investigate, please can you point your browser here:

Code:

http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats

And send me the results? PM is good. Many thanks

here you go
api.json.txt

Well, it seems everything good, the calculations are right as the RPC API data sent from CGminer. I don't want there is some problems with cgminer itself. Did you try BFGminer?

yeah but I don't get even close the hashrate I get with cgminer

[michelem]

yeah but I don't get even close the hashrate I get with cgminer

But everything worked fine right? Can you try to remove the AMU devices and try with only the LIN? I think there is some problems with cgminer RCP API running different devices together.

[G1rr]

But everything worked fine right? Can you try to remove the AMU devices and try with only the LIN? I think there is some problems with cgminer RCP API running different devices together.

Same problem, Accepted value over 1000 in cgminer screen output, Minera Dashboard output under 50

[michelem]

But everything worked fine right? Can you try to remove the AMU devices and try with only the LIN? I think there is some problems with cgminer RCP API running different devices together.

Same problem, Accepted value over 1000 in cgminer screen output, Minera Dashboard output under 50

Can you check if the dashboard numbers are the same from the link I sent you: http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats
I think it's not hard to find them

[G1rr]

Can you check if the dashboard numbers are the same from the link I sent you: http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats
I think it's not hard to find them

miner_stats:
"Accepted":225,"Rejected":5,"Hardware Errors":174

cgminer:
A:12008 R: 205 HW:176

it seems that the hardware error is correct but the accepted and rejected are not

[subseaguru]

is there a way to go back to 0.3.3?  i dont have a copy of the original image just starminer. my gridseeds and g-blades have been acting crazy and not hashing correct. 71K per gridseed and i cant get over 1.4m on the blades.

[IMJim]

is there a way to go back to 0.3.3?  i dont have a copy of the original image just starminer. my gridseeds and g-blades have been acting crazy and not hashing correct. 71K per gridseed and i cant get over 1.4m on the blades.

That's strange, I was a little concerned when I saw this as I upgraded to 0.3.4 I think it was 2 days ago.  Haven't had an issue at all, I checked em all again after seeing this and still all my GridSeeds are running great.  I have 100 of the 5 chippers, 10 sets of 10 per one Raspberry PI.  All 100 working great, they are running a bit on the hot side I would say, but I am also running them in a room that is over 90 degrees:-)  I would say I am probably averaging about 360kh/s per GS.

[subseaguru]

is there a way to go back to 0.3.3?  i dont have a copy of the original image just starminer. my gridseeds and g-blades have been acting crazy and not hashing correct. 71K per gridseed and i cant get over 1.4m on the blades.

That's strange, I was a little concerned when I saw this as I upgraded to 0.3.4 I think it was 2 days ago.  Haven't had an issue at all, I checked em all again after seeing this and still all my GridSeeds are running great.  I have 100 of the 5 chippers, 10 sets of 10 per one Raspberry PI.  All 100 working great, they are running a bit on the hot side I would say, but I am also running them in a room that is over 90 degrees:-)  I would say I am probably averaging about 360kh/s per GS.

im trying a new image now and will see what happens with 03.4. maybe i just had a bad image from previously.

[subseaguru]

is there a way to go back to 0.3.3?  i dont have a copy of the original image just starminer. my gridseeds and g-blades have been acting crazy and not hashing correct. 71K per gridseed and i cant get over 1.4m on the blades.

That's strange, I was a little concerned when I saw this as I upgraded to 0.3.4 I think it was 2 days ago.  Haven't had an issue at all, I checked em all again after seeing this and still all my GridSeeds are running great.  I have 100 of the 5 chippers, 10 sets of 10 per one Raspberry PI.  All 100 working great, they are running a bit on the hot side I would say, but I am also running them in a room that is over 90 degrees:-)  I would say I am probably averaging about 360kh/s per GS.

im trying a new image now and will see what happens with 03.4. maybe i just had a bad image from previously.

re-imaged minera 0,3.4 and everything works great!!

[IMJim]

is there a way to go back to 0.3.3?  i dont have a copy of the original image just starminer. my gridseeds and g-blades have been acting crazy and not hashing correct. 71K per gridseed and i cant get over 1.4m on the blades.

That's strange, I was a little concerned when I saw this as I upgraded to 0.3.4 I think it was 2 days ago.  Haven't had an issue at all, I checked em all again after seeing this and still all my GridSeeds are running great.  I have 100 of the 5 chippers, 10 sets of 10 per one Raspberry PI.  All 100 working great, they are running a bit on the hot side I would say, but I am also running them in a room that is over 90 degrees:-)  I would say I am probably averaging about 360kh/s per GS.

im trying a new image now and will see what happens with 03.4. maybe i just had a bad image from previously.

re-imaged minera 0,3.4 and everything works great!!

Glad it worked out for you:-)

[jdsalmon123]

trying to point my rpi withg minera on it to my main server running my litecoin wallet in server mode!

my server's ip is 192.168.0.5 and my rpi is 192.168.0.15 i have rpcallow:* in my conf folder.

somehow my rpi cannt connect to my server! how do i get around this? if their a setting i havent seen?

[IMJim]

Need some help......installed Minera 0.3.4 on a Raspberry PI to control a set of Gridseeds.  Minera installed correctly but is not letting me "save and restart" after adjusting settings.  When I change something in the settings window and click save and restart, it is not restarting or saving......instead the page scrolls down and the cursor moves into Email box under under the mobile miner settings.

Any idea why this happening and how I can get past this?

Thanks!!

[IMJim]

NM, I got it..think I found a possible minor bug.  Had to put a valid email address in that field before anything would save.......even though I have the mobile option disabled.

[madmartyk]

trying to point my rpi withg minera on it to my main server running my litecoin wallet in server mode!

my server's ip is 192.168.0.5 and my rpi is 192.168.0.15 i have rpcallow:* in my conf folder.

somehow my rpi cannt connect to my server! how do i get around this? if their a setting i havent seen?

You can't solo mine with manera, it puts http:// in front of everything you put in the settings.

[sinmantky]

Just like to report a thing with the GAWMiner Black Widow.

I have it connected to the RPi with 3 other Fury's (1.3+1.3+1.3+13MHs) By default, the BW has a spec of performing at a 12-13MH/s, yet Minera says it does 360MHs. The Fury's are showing correct figures.
I checked the pool and they say "12-13" so there are no hardware errors, just Minera displaying incorrectly.

It's not a grave matter, but kinda misleading, so I hope it could be fixed soon.

Thanks

[michelem]

Just like to report a thing with the GAWMiner Black Widow.

I have it connected to the RPi with 3 other Fury's (1.3+1.3+1.3+13MHs) By default, the BW has a spec of performing at a 12-13MH/s, yet Minera says it does 360MHs. The Fury's are showing correct figures.
I checked the pool and they say "12-13" so there are no hardware errors, just Minera displaying incorrectly.

It's not a grave matter, but kinda misleading, so I hope it could be fixed soon.

Thanks

What miner do you use? Is the pool hashrate or the device one affected?

Can you please send me the output of this URL: http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats

Thanks

[sinmantky]

What miner do you use? Is the pool hashrate or the device one affected?

Can you please send me the output of this URL: http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats

Thanks

Using BFGMiner
Miner is 0.3.4
I'll PM you the log.

[bernard75]

This is a typical case I need to investigate, please can you point your browser here:

Code:

http://<YOUR-IP>/minera/index.php/app/api?command=miner_stats

And send me the results? PM is good. Many thanks

here you go
api.json.txt

[toxic0n]

A few days ago, my Minera box just started freezing randomly several times per day. No config changes, running less than 10 Gridseeds.

Updated to the latest version, still the same thing. It just stops responding to ping, HTTP or SSH. The log files do not show anything, just shares being accepted until it freezes. Have to cut the power to reboot it.
Anyone experience anything similar?