[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[Agamenon]

I'm trying to configure the Minera, to use with my cgminer and my ASIC. but when I finish to install in my ubuntu 13.10, I open the web page, put the login, and then Minera brings me to <my ip>/mining/index.php/app/dashboard and is a blank screen, What I'm doing wrong ?

[IMJim]

Have been using Minera for a week or so with 160 Gridseeds.  I really like the Auto Tune feature of CPUMiner but wondering more of how this works.

Does auto tune have to run every time the devices are restarted?  Is there a way to save once CPUMiner has figured out best frequencies so it doesn't have to restart the process every time?

After its tuned you can turn off auto tune and copy the tuned config and pasted it in extra settings.

Can someone help me out with this?  I cannot find where to copy the config from and am sure where I would paste in it either after looking at this.

I settings scroll down to Saved frequencies. Copy that and scroll up to extra settings

Man, I thought I was losing it there for a second, could not find what you were referring to for nothing!  I got it figured out though, just in case others run across this, here is what I had to do.......

First had to go to dashboard and click the pencil icon in the Miner Settings box to save the current frequencies.  Until this is done, "Saved Frequencies" will not show up in the Settings page.  Once that was done, was as stated.......copy code from the newly created "Saved Fequencies" section on the Settings page and paste into the Extra Options box......also on the Settings Page.

Thanks for your help bud!!

Oh yeah! Forgot about all that. Thanks for the reminder. I probably should do that instead of auto tuning all the time.

HA, no worries at all man, you got me on the right track to figure it out and I very much appreciate you responding at all!  I hate when I have a question and nobody replies:-(

Thanks bud!!

[Ruledo]

I figured I would post this here since I'm running Minera.
It's my zeusminer blizzard (like Gaw Fury) experience.

https://bitcointalk.org/index.php?topic=644921.msg7980470#msg7980470

[MobileWill]

I figured I would post this here since I'm running Minra.
It's my zeusminer blizzard (like Gaw Fury) experience.

https://bitcointalk.org/index.php?topic=644921.msg7980470#msg7980470

Thanks, I will post my setup in your link.

[madog97]

Hi

is there a way to login to minera GUI as a read only user, so that I can share the GUI without the possibility of the viewer to mess things up.

I know there was a post before about this some 30+ pages back.
would be great if there was a possibility of declaring parts of the GUI to be shown.


have a nice day to all of you

[michelem]

Hi

is there a way to login to minera GUI as a read only user, so that I can share the GUI without the possibility of the viewer to mess things up.

I know there was a post before about this some 30+ pages back.
would be great if there was a possibility of declaring parts of the GUI to be shown.


have a nice day to all of you

No, but that's a feature I'd like to add in next releases.

---------

If you wanna know how much people are using Minera, here are the first stats I got:

active systems: 152
active devices: 992
last total hashrate: 91.04GH/s
miners:
cgdmaxlzeus: 17
cpuminer: 112
bfgminer: 14
unknown: 6
cgminer: 3

Soon you will be able to see them at http://getminera.com

[MobileWill]

Awesome to see stats.

I have 1 system with 2 Gridseeds. I hope to eventually switch my 14 furys over. They are running on 2 ZenMiners.

[Doeyourthing]

@ michelem: many many thanks for your time and effort for this Mining web interface.

Keep up the good work.

Can someone help me out, with a good config for G -Blade 80 chip module.

Thanks

[fivejonnyfive]

Hi

is there a way to login to minera GUI as a read only user, so that I can share the GUI without the possibility of the viewer to mess things up.

I know there was a post before about this some 30+ pages back.
would be great if there was a possibility of declaring parts of the GUI to be shown.


have a nice day to all of you

No, but that's a feature I'd like to add in next releases.

---------

If you wanna know how much people are using Minera, here are the first stats I got:

active systems: 152
active devices: 992
last total hashrate: 91.04GH/s
miners:
cgdmaxlzeus: 17
cpuminer: 112
bfgminer: 14
unknown: 6
cgminer: 3

Soon you will be able to see them at http://getminera.com

Add 1 to the CPU miner tally 

I'm running 0.2.x still because for whatever reason 0.3.2 gave me an incredibly high error rate and autotune lowers the frequency down to very low speeds.

[ManeBjorn]

So cool.
I am really loving Minera.
Keep up the great job.

Hi

is there a way to login to minera GUI as a read only user, so that I can share the GUI without the possibility of the viewer to mess things up.

I know there was a post before about this some 30+ pages back.
would be great if there was a possibility of declaring parts of the GUI to be shown.


have a nice day to all of you

No, but that's a feature I'd like to add in next releases.

---------

If you wanna know how much people are using Minera, here are the first stats I got:

active systems: 152
active devices: 992
last total hashrate: 91.04GH/s
miners:
cgdmaxlzeus: 17
cpuminer: 112
bfgminer: 14
unknown: 6
cgminer: 3

Soon you will be able to see them at http://getminera.com

[jekv2]

Great job guys.  

Fury.
Minera 0.3.2.
cgdmaxlzeus.

Frequency is detected.. --zeus-clock 354
Detected the fury quickly.


Stop miner does not work. Does not take miner/miners offline.
Restart miner does not work either.

[la7eralus]

Hi

is there a way to login to minera GUI as a read only user, so that I can share the GUI without the possibility of the viewer to mess things up.

I know there was a post before about this some 30+ pages back.
would be great if there was a possibility of declaring parts of the GUI to be shown.


have a nice day to all of you

No, but that's a feature I'd like to add in next releases.

---------

If you wanna know how much people are using Minera, here are the first stats I got:

active systems: 152
active devices: 992
last total hashrate: 91.04GH/s
miners:
cgdmaxlzeus: 17
cpuminer: 112
bfgminer: 14
unknown: 6
cgminer: 3

Soon you will be able to see them at http://getminera.com

I'd love to crank up the numbers and get my RK-BOX farm successfully running under MinerA, but so far I seem to be unable to get CGMiner to function or BFGMiner to the correct hashrate, only pulling about 50% of the 120+ GH/s per blade =/

[Ruledo]

Great job guys.  

Fury.
Minera 0.3.2.
cgdmaxlzeus.

Frequency is detected.. --zeus-clock 354
Detected the fury quickly.


Stop miner does not work. Does not take miner/miners offline.
Restart miner does not work either.

354?
What is your hardware error rate?

[jekv2]

Great job guys.  

Fury.
Minera 0.3.2.
cgdmaxlzeus.

Frequency is detected.. --zeus-clock 354
Detected the fury quickly.


Stop miner does not work. Does not take miner/miners offline.
Restart miner does not work either.

354?
What is your hardware error rate?

9-10%

Edit:

I dropped it down to 350.
I am down to 3.85% in HW errors.

[LoneWolf3574]

I've been looking for something like Minera for what I like to call my mini-Farm.

I've been using Starminer but they don't support mining both gridseed & zeusminer at the same time, but they did suggest I try to compile the coding and give it a shot.  Yeah, I'm not really Linux savvy and I'm still teaching it to myself with a little help, so I picked up a 2nd RPi.

Right now I'm using Zoomhash's newest image to mine both on a single RPi right now, however, the webui is very minimal and not giving me as much information as I would like AND it has no failover capability should the only pool it allows go down.  They are using cpuminer (gridseed) and bfgminer (zeusminer) concurrently, which is giving a surprisingly effective hash rate with all my miners (8Mh/s+ average).

I really like what I see with the images posted of the Minera WebUI and would like to jump on board.  But my big question is will Minera support running Gridseed Blades (1) and Zeusminer Blizzards (2) at the same time. BTW, the rest of my miners will arrive by the end of this week so I'll have double of each.

Thanks

[MobileWill]

I've been looking for something like Minera for what I like to call my mini-Farm.

I've been using Starminer but they don't support mining both gridseed & zeusminer at the same time, but did suggest I try to compile the coding and give it a shot.  Yeah, I'm not really Linux savvy and I'm still teaching it to myself with a little help, so I picked up a 2nd RPi.

Right now I'm using Zoomhash's newest image to mine both on a single RPi right now, however, the webui is very minimal and not giving me as much information as I would like AND it has no failover capability should the only pool it allows go down.  They are using cpuminer (gridseed) and bfgminer (zeusminer) concurrently, which is giving a surprisingly effective hash rate with all my miners (8Mh/s+ average).

I really what I see with the images posted of the Minera WebUI and would like to jump on board.  But my big question is will Minera support running Gridseed Blades (1) and Zeusminer Blizzards (2) at the same time. BTW, the rest of my miners will arrive by the end of this week so I'll have double of each.

Thanks

Hi,

Its not so much Minera but the miners it supports has support for it. Check if the official BFGMiner or CGMiner supports both. I think BFGminer might. If anything you could update the included binaries to a version that does.

[jekv2]

354?
What is your hardware error rate?

9-10%

Edit:

I dropped it down to 350.
I am down to 3.85% in HW errors.

350 brings me 10% after 9 hours.

[bobsav2121]

I would love to use your software BUT I cant keep my pool info in.
It always default to the authors worker ID and donation pool.
I've tried to remove it but it keeps coming back, what am I doing wrong ?

Bob

[madmartyk]

I would love to use your software BUT I cant keep my pool info in.
It always default to the authors worker ID and donation pool.
I've tried to remove it but it keeps coming back, what am I doing wrong ?

Bob

After you enter your pool info and hit save, it will move you to the mobile notification section.  Remove what is in the E-Mail address and hit save again.  It will save after that.

[madmartyk]

The question I have is, with 10 Gridseed blades, clock set to 837 (can't get it to 838), I'm only getting a speed of 2 Mh/s per blade.  If I hook it directly to the computer I get full speed.  What am I missing?  I thought maybe it was the program not reporting right, but the pool is showing only 2 Mh/s per blade.  Is there settings I need to add?  It worked great a few versions ago!!