[ANN][CLAM] CLAMs, Proof-Of-Chain, Proof-Of-Working-Stake, a.k.a. "Clamcoin"

[indolister]

i am new with CLAM but i really like this coin, now i sync my client
please advice- its any way to i can simple add my bitcoin private key to CLAM ?
(in client i saw i can import only wallet.dat - its not possible to import the bitcoin private key)
thanks

[BurtW]

i am new with CLAM but i really like this coin, now i sync my client
please advice- its any way to i can simple add my bitcoin private key to CLAM ?
(in client i saw i can import only wallet.dat - its not possible to import the bitcoin private key)
thanks

Clam Client -> Console -> importprivkey <private key>

[Bitsky]

i am new with CLAM but i really like this coin, now i sync my client
please advice- its any way to i can simple add my bitcoin private key to CLAM ?
(in client i saw i can import only wallet.dat - its not possible to import the bitcoin private key)
thanks

You can do it via the console. Use importprivkey with the BTC private key. Afterwards you have to restart the client because for whatever reason the tab for receiving addresses does not get updated, and the console gives no hint that it was successful, or what CLAM address was generated.

[delightfulbold]

Hello! If you need quality translated Russian thread, contact me please. Best regards.

[adabau]

Hej Guys! I think that there is a good picture now on Clam and maybe a good chance to buy it.
In my mind, we all can see a strong accumulation on this coin now. Exactly on bittrex it's really simple to see,
Maybe in the future  we will see pump on clam? 

Just Dice is the only decent investment I see in the crypto world so far. CLAM, which are basically both Just Dice casino chips and shares, are so undervalued considering that.

I think so too!!!
This is really cool and old casino and we all know that it will not close tomorrow. I have a lot of friends that like this casino and invest in clam slowly.
And we all know that thare are some guys that can make pump on CLAM in the future

[dooglus]

"scriptPubKey":"WHERE-DO-I-GET-THIS-FROM?"

Run "validateaddress" on the address. It shows the scriptPubKey as one of the outputs.

[indolister]

i added the bitcoin private key in WIF format to my CLAM client with the command importprivkey <private key>
after the client work some minute, a new clam address appear in my client in Receive - Address section
BUT the 4.6 clam coin not appear in my balance (although when i check the original bitcoin address on http://www.khashier.com/address the site show me 4.60545574 balance)
what else i need to do to i can add/use my balance
thanks

[zazarb]

i added the bitcoin private key in WIF format to my CLAM client with the command importprivkey <private key>
after the client work some minute, a new clam address appear in my client in Receive - Address section
BUT the 4.6 clam coin not appear in my balance (although when i check the original bitcoin address on http://www.khashier.com/address the site show me 4.60545574 balance)
what else i need to do to i can add/use my balance
thanks

Is your clams client synchronized ? I do not see any other problems.

[indolister]

yes, it is, i waited around 2 days to finish the sincronisation
i think if a new clam address appear cant be sync problem

[BayAreaCoins]

yes, it is, i waited around 2 days to finish the sincronisation
i think if a new clam address appear cant be sync problem

You could dig your clams near instantly using FreeBitcoins.com or Just-dice.com.

[indolister]

i diged till now on FreeBitcoins.com  .. its not cheap, i lose enough here
thats why i installed the clam client to i can dig the coin myself - BUT dont work for me
(how can i dig with Just-dice.com? -may i will try)

[BayAreaCoins]

(how can i dig with Just-dice.com? -may i will try)

Go to the "chat" tab and type:

/dig

i diged till now on FreeBitcoins.com

I appreciate you digging with us.  

Did you find CLAM because of FreeBitcoins.com? (if you don't mind me asking)

[indolister]

yes, i find about the CLAM coin first on FreeBitcoins.com
and i diged last days many address .. really like this methode , its easy and nice, but now i donloaded the client and synced to try obtain a bit more money -but dont work till now for me, dont appear the balance

[BayAreaCoins]

yes, i find about the CLAM coin first on FreeBitcoins.com
and i diged last days many address .. really like this methode , its easy and nice, but now i donloaded the client and synced to try obtain a bit more money -but dont work till now for me, dont appear the balance

Well we are always here for you if needed.  I process everything on my end by hand.  I keep a cell phone on me that alerts me if someone needs to be cashed out.

Best of luck man and happy the website brought you in.

You should consider investing on Just-dice... it's the best website in crypto.

[BayAreaCoins]

yes, i find about the CLAM coin first on FreeBitcoins.com
and i diged last days many address .. really like this methode , its easy and nice, but now i donloaded the client and synced to try obtain a bit more money -but dont work till now for me, dont appear the balance

We have a .dat tool that you could do every single one of your addresses in about 3 clicks (and change addresses)... you'd save a ton of time rather than doing them by hand.  This is our only tool that beats the shit out of every other dig tool available in my opinion even with the fee.  These small markets can swing 25% in a day... the CLAM wallet takes weeks to sync from scratch on a good internet connection and a nice machine.

https://freebitcoins.com/clamchecker/dig_wallet

I understand you probably like to do a few at a time, make sure you get paid and do a few more... that is the smart way to do it, but even if you dig 100,000 addresses in 3 clicks... we are going to make sure you get paid.

[indolister]

the problem its that i have blockchain address and as i konw in last time is not possible to export/save wallet.dat (or its possible?) .. so i dont can import the whole wallet to your website, only one by one address with private key

[BayAreaCoins]

the problem its that i have blockchain address and as i konw in last time is not possible to export/save wallet.dat (or its possible?) .. so i dont can import the whole wallet to your website, only one by one address with private key

If you wanted we would be more than happy to take a text file and apply a simple script against it using a Multibit wallet and dig stuff for you using automation.

You can open a support ticket on FreeBitcoins ("Contact Us" under Info/Help) and send it that way.  (Be sure to include your payment address or addresses if you want multiple)

No additional charge of course.

I can ask if kef can come here and try to walk you through setting up your own .dat out of a blockchain wallet as well if you want, but I think opening a support ticket and copy/pasting is easiest.  

Obviously make sure all the addresses are empty and retired.  You should keep the keys though just in case you receive a payment down the road or whatever.

[FrankS]

"scriptPubKey":"WHERE-DO-I-GET-THIS-FROM?"

Run "validateaddress" on the address. It shows the scriptPubKey as one of the outputs.

I'm sorry, but I can't get it to work. When I run validateaddress with the sender address and use the pubkey it returns, signrawtransaction only returns the hex again and says it failed.

Is there any step-by-step example that guides through the entire process?

Also, does it matter if the client is not synced?

[dooglus]

"scriptPubKey":"WHERE-DO-I-GET-THIS-FROM?"

Run "validateaddress" on the address. It shows the scriptPubKey as one of the outputs.

I'm sorry, but I can't get it to work. When I run validateaddress with the sender address and use the pubkey it returns, signrawtransaction only returns the hex again and says it failed.

Is there any step-by-step example that guides through the entire process?

Also, does it matter if the client is not synced?

It doesn't matter if the client is synced. You should unlock the wallet with the walletpassphrase RPC before trying to sign a transaction. Other than that, maybe you could show more details. What are you typing, and what does the error say? "I failed" isn't helpful.

[FrankS]

It doesn't matter if the client is synced. You should unlock the wallet with the walletpassphrase RPC before trying to sign a transaction. Other than that, maybe you could show more details. What are you typing, and what does the error say? "I failed" isn't helpful.

Here's the random test data I'm using:

From address: xSPPAQsgYTUsiH51xG3u4Shf7Cc7dt5V7g (importprivkey Lo2RApGkaDZDePA347i56Lo4xRNGBwuxUgyQBC5cK9Ea2Kpn2mnt)
To address: xK8vfFyKC4J2SHR2Hhk7whQAaCTGWbEEwW (importprivkey LnE8nFjSGVKhxoo5rxNZnQU31zT2JnDmVNsEEXoA8tq1HoXtJ4DC)
Amount: 3.5 CLAM
TX in which they were received: 71f2cbe9ff92b8c62a2bcfba5dfc9bc32a2d0c71bf55834e6d884b9ab0de201c
Output in which they were received: 69

By the way, I'm using the console window of the clam-qt.exe client. I'm testing on a Windows VM without network that has never seen any Clam install before (and for every test I revert it back to a previous snapshot).
I just start the exe, import the above keys, restart the exe and go to the console window. There's no password set (at least clam-qt never asked for one).

Here's the screenshot of my attempt: http://picpaste.com/iYdNPs6T.png

I'm aware that any other Clams would be a tx fee; I'm just trying to get this to work right now, so I don't bother about fees.