[ANN][CLAM] CLAMs, Proof-Of-Chain, Proof-Of-Working-Stake, a.k.a. "Clamcoin"

[andulolika]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

How/where would you "ad" clamcoin? Swap was shared through our facebook .

[BayAreaCoins]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

Check out FreeBitcoins.com/swap.

I own it.

[jordixal]

Hello, my wallet stucked at block 2446475 (2019-03-01) and can´t sync since then. Also I have just 3 connections. Anyone can help me to fix this? Should I do a resync? Or do yo have good peers to connect to?

[criptocambio]

Hello, my wallet stucked at block 2446475 (2019-03-01) and can´t sync since then. Also I have just 3 connections. Anyone can help me to fix this? Should I do a resync? Or do yo have good peers to connect to?

Here is a list of live nodes:
https://criptocambio.com.br/clamNodes

To speed up the sync process, please use the bootstrap file from dooglus and/or update your clam.conf with this setting:

Code:

maxorphanblocks=10000

And then restart the client. The bigger the maximum orphan blocks, the quicker it syncs (but with the cost of ram usage)

[tunmkr]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

Check out FreeBitcoins.com/Swap.

I own it.

careful with the link, doesn't work , had to change the capital S to lowercase (Swap->swap)

[jordixal]

Hello, my wallet stucked at block 2446475 (2019-03-01) and can´t sync since then. Also I have just 3 connections. Anyone can help me to fix this? Should I do a resync? Or do yo have good peers to connect to?

Here is a list of live nodes:
https://criptocambio.com.br/clamNodes

To speed up the sync process, please use the bootstrap file from dooglus and/or update your clam.conf with this setting:

Code:

maxorphanblocks=10000

And then restart the client. The bigger the maximum orphan blocks, the quicker it syncs (but with the cost of ram usage)

Thanks 

[1xhopeless]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

How/where would you "ad" clamcoin? Swap was shared through our facebook .

The link is on their user profile. Here you go: https://simpleswap.io/

[1xhopeless]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

Check out FreeBitcoins.com/Swap.

I own it.

I know. We need more platforms. Unlike yours they don't have limits  https://simpleswap.io/

[andulolika]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

Check out FreeBitcoins.com/Swap.

I own it.

I know. We need more platforms. Unlike yours they don't have limits  https://simpleswap.io/

So you come into a COIN thread to promote an exchange with no limit on a trade then critisize the one that we are certain is not a scam?

[BayAreaCoins]

Can the dev help to ad clamcoin unlike shapeshift they don't have KYC   https://twitter.com/SimpleSwap_io/status/1103421887642849282

Check out FreeBitcoins.com/Swap.

I own it.

I know. We need more platforms. Unlike yours they don't have limits  https://simpleswap.io/

They don't seem to support CLAM.  Is there something we can do in order to get them to support CLAM?

Also, I don't know how someone could offer limitless trading in these ecosystems...  if it's too good to be true, it probably is.

[Faust Roland]

The Poloniex's Clam client seems to be in some troubles. When I deposited the clams it took 4-6 hours to get credited few days ago.
The withdrawal today ended up with Complete: Error. And the coins were not credited back to the balance. Contacted support.

Anyway, the margin lending is really high there.

I got a problem while withdrawing from poloniex too. In the withdraw history there was a txid, but a invalid one that do not show up on explorers. A huge amount, scared the soul out of my body! They took a week to solve that. But for now, i will just send and receive small amounts from poloniex until the bullrun ends

UPDATE: I got the coins credited back. I did new withdrawal. Now I got "Complete" with txid... But the transaction doesn't appeared on the blockchain.

[criptocambio]

The Poloniex's Clam client seems to be in some troubles. When I deposited the clams it took 4-6 hours to get credited few days ago.
The withdrawal today ended up with Complete: Error. And the coins were not credited back to the balance. Contacted support.

Anyway, the margin lending is really high there.

I got a problem while withdrawing from poloniex too. In the withdraw history there was a txid, but a invalid one that do not show up on explorers. A huge amount, scared the soul out of my body! They took a week to solve that. But for now, i will just send and receive small amounts from poloniex until the bullrun ends

UPDATE: I got the coins credited back. I did new withdrawal. Now I got "Complete" with txid... But the transaction doesn't appeared on the blockchain.

It happened for me, too. Open a ticket, and they will take a look at it. For me, it took almost a week for them to send my coins.

Additionally, looks like poloniex is having serious problems with the CLAM client: I saw a lot of this cases happening after the bullrun, and i have two deposits still waiting to be processed. One of them shows with 0 confirmations for more than 5 hours now, the other does not even show in history.

I would recommend another exchange, but... Well, there are none trading CLAMs, i think. Cryptopia relaunched in read-only mode some weeks ago, and are working to enable trading again, but i wold not recommend them after what happened

[BayAreaCoins]

The Poloniex's Clam client seems to be in some troubles. When I deposited the clams it took 4-6 hours to get credited few days ago.
The withdrawal today ended up with Complete: Error. And the coins were not credited back to the balance. Contacted support.

Anyway, the margin lending is really high there.

I got a problem while withdrawing from poloniex too. In the withdraw history there was a txid, but a invalid one that do not show up on explorers. A huge amount, scared the soul out of my body! They took a week to solve that. But for now, i will just send and receive small amounts from poloniex until the bullrun ends

UPDATE: I got the coins credited back. I did new withdrawal. Now I got "Complete" with txid... But the transaction doesn't appeared on the blockchain.

It happened for me, too. Open a ticket, and they will take a look at it. For me, it took almost a week for them to send my coins.

Additionally, looks like poloniex is having serious problems with the CLAM client: I saw a lot of this cases happening after the bullrun, and i have two deposits still waiting to be processed. One of them shows with 0 confirmations for more than 5 hours now, the other does not even show in history.

I would recommend another exchange, but... Well, there are none trading CLAMs, i think. Cryptopia relaunched in read-only mode some weeks ago, and are working to enable trading again, but i wold not recommend them after what happened

We are building a Bid/Ask on FreeBitcoin.com for BTC/CLAM.

Going as fast as we can, but we got two things ahead of that.

[jpcfan]

clam is $5



why did it jump up?

[bradleyb21]

For the Nodes or proxy IPs
It also asks for Port number and SOCKS version

[bradleyb21]

Where is the .conf file? I do not see it near my .wallet file?

Hello, my wallet stucked at block 2446475 (2019-03-01) and can´t sync since then. Also I have just 3 connections. Anyone can help me to fix this? Should I do a resync? Or do yo have good peers to connect to?

Here is a list of live nodes:
https://criptocambio.com.br/clamNodes

To speed up the sync process, please use the bootstrap file from dooglus and/or update your clam.conf with this setting:

Code:

maxorphanblocks=10000

And then restart the client. The bigger the maximum orphan blocks, the quicker it syncs (but with the cost of ram usage)

[Vin]

.conf is always in:

X:\Users\XXXXX\AppData\Roaming\XXX

-> X:\Users\XXXXX\AppData\Roaming\Clam

[bradleyb21]

Thank you for the reply, but no such file exists in that folder of mine.

.conf is always in:

X:\Users\XXXXX\AppData\Roaming\XXX

-> X:\Users\XXXXX\AppData\Roaming\Clam

[Vin]

Thank you for the reply, but no such file exists in that folder of mine.

.conf is always in:

X:\Users\XXXXX\AppData\Roaming\XXX

-> X:\Users\XXXXX\AppData\Roaming\Clam

You are welcome.

You have just to create a file named:

clam.conf

and insert it.

Be aware that the name is clam.conf and not clam.conf.txt

[bradleyb21]

Thank you for the reply, but no such file exists in that folder of mine.

.conf is always in:

X:\Users\XXXXX\AppData\Roaming\XXX

-> X:\Users\XXXXX\AppData\Roaming\Clam

You are welcome.

You have just to create a file named:

clam.conf

and insert it.

Be aware that the name is clam.conf and not clam.conf.txt

Much appreciated.
Lastly, should I use the map port using UPnp
or
Connect through SOCKS?
If Socks - Is this the Proxy Ip: 78.46.108.202:31174 and what are the Port numbers and SOCKS versions?

Thank you