ivomm
Legendary
Offline
Activity: 1850
Merit: 2829
All good things to those who wait
|
|
September 04, 2016, 02:07:41 PM |
|
Claymore, could you add the option (like the eth miner) "-r 1" closes miner and execute "reboot.bat" file in the miner directory if some GPU failed? Thanks!
|
|
|
|
|
|
|
"I'm sure that in 20 years there will either be very large transaction volume or no volume." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
nerdralph
|
|
September 04, 2016, 02:10:14 PM |
|
I have tested it on 1 x Sapphire R7 370 Nitro (... its old test rig but with Win7, i5 and 32GB RAM ). So I set h=1024 instead of the default 512 and removed intensity settings I get 373 hash -- is this normal? Miner runs well with occasional stratum disconnect from cryptonight.usa.nicehash.com:3355 but no problem, connecting back and mining as usual. Claymore, With XMR to roof now, this is a good miner to improve on. And maybe 3rd coin with CDM 7.0 Update: 1 ETH = 1 XMR... amazing With my 370 I get 500 hash. wow 500 is good, any OC? drivers 15.12? 15.7.1 MSI 2GB 370 +20 Power Limit 1150/1500 They also get exactly +15mh/s for ETH. Exact Power Draw. Pretty impressive since the 280x is only 550 The best I can get with Wolf's miner under Linux is 405 (clocked at 1125/1500). I guess I'll have to try Claymore's (assuming there is a Linux version).
|
|
|
|
TheLAWNoob
Member
Offline
Activity: 92
Merit: 10
|
|
September 04, 2016, 05:08:41 PM |
|
ASUS RX 470 underclocked 1100 core 1800 mem
540 H/s
140W from wall with EVGA 1000W G2, Celeron Dual core, ASrock H97 Mobo. ETH + SC uses about 180W.
Does Monero like fast memory? High core clocks?
|
Working on something good. Pls support.
|
|
|
the_darkness
Member
Offline
Activity: 79
Merit: 10
|
|
September 04, 2016, 06:32:13 PM |
|
Perhaps odd question but wonder if anyone has any thoughts. It is the middle of a heat wave here and I would like to keep my 390X going but it is getting uncomfortably warm in the room it is in. Is there any way for me to reduce the GPU utilization a bit? E.g. set it at 50% of full use for a few days? I get around 850 h/s at 100% utilization. I have changed to low intensity mode and fiddled around with -h, -a, and -li and through all permutations the GPU still has 100% utilization and never goes below around 760 h/s.
|
|
|
|
ps_jb
|
|
September 04, 2016, 10:28:56 PM |
|
Can I use my polo wallet with dwarfpool?
I'm getting an error while trying to start mining
|
|
|
|
adamvp
|
|
September 05, 2016, 12:13:46 AM |
|
Can I use my polo wallet with dwarfpool?
I'm getting an error while trying to start mining
Of course. Just don't forget to add your payment id after dot... It should look like wallet.paymentid.yourworker
|
I am looking for signature campaign pm me
|
|
|
ps_jb
|
|
September 05, 2016, 12:47:41 AM |
|
Of course. Just don't forget to add your payment id after dot... It should look like wallet.paymentid.yourworker
Does not work: NsGpuCNMiner.exe -o -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u WALLET.Payment-ID.Worker-ID -p x invalid address used for login
|
|
|
|
hawkfish007
|
|
September 05, 2016, 01:05:48 AM |
|
Of course. Just don't forget to add your payment id after dot... It should look like wallet.paymentid.yourworker
Does not work: NsGpuCNMiner.exe -o -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u WALLET.Payment-ID.Worker-ID -p x invalid address used for login Try this, should work NsGpuCNMiner.exe -o -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u WALLET.Payment-ID.Worker-ID -p x
|
|
|
|
ps_jb
|
|
September 05, 2016, 01:31:51 AM |
|
Try this, should work
NsGpuCNMiner.exe -o -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u WALLET.Payment-ID.Worker-ID -p x
No - it does not work Actually second -o appears when I inserted line here - it was not in original line I've used to start the miner I think solution is quite simple - so need help from miners who use dwarfpool and wallet from Polo
|
|
|
|
hawkfish007
|
|
September 05, 2016, 01:37:02 AM |
|
Try this, should work
NsGpuCNMiner.exe -o -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u WALLET.Payment-ID.Worker-ID -p x
No - it does not work Actually second -o appears when I inserted line here - it was not in original line I've used to start the miner I think solution is quite simple - so need help from miners who use dwarfpool and wallet from Polo Strange, mine worked until I started mining to NH. Here is my bat, stat should still be up on dwarfpool. NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.paymentID.1 -p x
|
|
|
|
ps_jb
|
|
September 05, 2016, 01:42:28 AM |
|
Strange, mine worked until I started mining to NH. Here is my bat, stat should still be up on dwarfpool.
NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.paymentID.1 -p x
Do I need a space in address after GR? Otherwise my bat looks identical to yours
|
|
|
|
hawkfish007
|
|
September 05, 2016, 01:45:24 AM |
|
Strange, mine worked until I started mining to NH. Here is my bat, stat should still be up on dwarfpool.
NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.paymentID.1 -p x
Do I need a space in address after GR? Otherwise my bat looks identical to yours No spaces, it is there probably because of me copy and pasting. Rig ID should be numbers only.
|
|
|
|
ps_jb
|
|
September 05, 2016, 01:48:09 AM Last edit: September 05, 2016, 02:32:25 AM by ps_jb |
|
Rig ID should be numbers only.
Fuck - mine were letters Now of course it works! Thank you - appreciate your help!
|
|
|
|
ps_jb
|
|
September 05, 2016, 02:36:15 AM |
|
Stats:
2x R9 390 and 3x RX 480
Total is 3570 Hs
Power consumption is 940W by killowatt
R9 390 are downvolted -100mV and OC to 1075MHz 1x rx 480 is stock 2x rx 480 are flashed with Heliox rom (which does not work with my cards)
I used the default command line - any suggestions on tuning rig performance are welcome
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3626
Merit: 1967
|
|
September 05, 2016, 03:32:19 AM |
|
So .. Is claymore a f*kin billionaire yet? Was that him dumiping yesterday? LOL..
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
September 05, 2016, 04:49:38 AM |
|
Stats:
2x R9 390 and 3x RX 480
Total is 3570 Hs
Power consumption is 940W by killowatt
R9 390 are downvolted -100mV and OC to 1075MHz 1x rx 480 is stock 2x rx 480 are flashed with Heliox rom (which does not work with my cards)
I used the default command line - any suggestions on tuning rig performance are welcome
For 390 = -100mV, 1050 core, 1125 memory = 30MHs in CDM mining only ETH Used the same AB settings for XMR with CCGM = solid performance 3758h/s ( 5 x MSI R9-390)
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Potap
Newbie
Offline
Activity: 38
Merit: 0
|
|
September 05, 2016, 05:32:29 AM |
|
Claymore's CryptoNote GPU Miner v9.5 280x - ~64% load ,have a day works,win8.1x64 ,15.12 If you set power limit to like -50% gpu usage will go to 100%, but hashrate wont change. (I used MSI afterburn) OK. thank
|
|
|
|
ps_jb
|
|
September 05, 2016, 01:09:50 PM |
|
For 390 = -100mV, 1050 core, 1125 memory = 30MHs in CDM mining only ETH
Used the same AB settings for XMR with CCGM = solid performance 3758h/s ( 5 x MSI R9-390)
Thank you citronick - you are always helpful! Probably rig with 5x R9 390 gives you ~1700W?
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
September 05, 2016, 01:26:42 PM |
|
For 390 = -100mV, 1050 core, 1125 memory = 30MHs in CDM mining only ETH
Used the same AB settings for XMR with CCGM = solid performance 3758h/s ( 5 x MSI R9-390)
Thank you citronick - you are always helpful! Probably rig with 5x R9 390 gives you ~1700W? Late last year, I wanted to build an ETH rig, so.... 6 x 390s but need needed 2 x PSU - which I was not comfortable with. So only 5 x 390s and underclocking was the answer, just under 1400-1500watts - so within the ratings of my PSU which is a 1600w EVGA-G2 - amazing PSU but very good but very pricey. I was an early adopter of CDM and this rig 5 x MSI 390 consistently does 150MHs at ethpool - rock stable - very happy. Converting the same rig to Claymore's XMR miner did not disappoint too - works like a champ! If I have to do it all over again, 700-800watts max PSU, maybe a 4 x GPU rig with 150w or better TDM, is ideal. Btw, Heliox has a ROM mod for 390 too
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
ps_jb
|
|
September 05, 2016, 01:37:06 PM |
|
Late last year, I wanted to build an ETH rig, so.... 6 x 390s but need needed 2 x PSU - which I was not comfortable with. So only 5 x 390s and underclocking was the answer, just under 1400-1500watts - so within the ratings of my PSU which is a 1600w EVGA-G2 - amazing PSU but very good but very pricey. I was an early adopter of CDM and this rig 5 x MSI 390 consistently does 150MHs at ethpool - rock stable - very happy. Converting the same rig to Claymore's XMR miner did not disappoint too - works like a champ! If I have to do it all over again, 700-800watts max PSU, maybe a 4 x GPU rig with 150w or better TDM, is ideal. Btw, Heliox has a ROM mod for 390 too I'm kinda will stop with flashing for a while My mixed rig gives me 3500 Hs with 940W from the wall, so RX 480 is quite a good card for it
|
|
|
|
|