Claymore's CryptoNote AMD GPU Miner v11.3

[superresistant]

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

6 GPU on every rig and 4GB of RAM, virtual memory is set on 17000MB. I can set it 20k-30k

Maybe you overclocked. In that case, it's the problem.

[shulio]

No, i run them on default settings 975/1250

[Claymore]

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

6 GPU on every rig and 4GB of RAM, virtual memory is set on 17000MB. I can set it 20k-30k

Cards R9 270 2GB ? Or R9 270 1GB?

[mafostedu]

v9.0 is available:

- Improved speed by 5-15%, depends on card:
   About 810 h/s on stock 290X (Hynix memory).
   About 710 h/s on stock 290X (Elpida memory).
   About 690 h/s on stock 290  (Elpida memory).
   About 550 h/s on stock 280X (Hynix memory).
   About 440 h/s on stock 270X (Elpida memory).
   About 410 h/s on stock 270  (Elpida memory).  
- Reduced dev fee, now it is 2.5%.
- Improved "-li" option, Windows freezes even less.
- Best "-a" and "-h" values are set automatically for 290X,290,280X,270X,270,6950_2GB cards.

Note: For cards that are not in this list you need to check different "-a" and "-h" values to get max speed.

~25 watt/card less power consumption (Compared to v. 6.1), 25 hash/card improvement (290 Trix Hynix) 2.5% more share (due to reduced fees)
Really great improvement over all.

[omnik]

Fee is still too high!
With Monero losing 25% of its value towards Bitcoin in past fee weeks there is no money to be made.

[shulio]

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

6 GPU on every rig and 4GB of RAM, virtual memory is set on 17000MB. I can set it 20k-30k

Cards R9 270 2GB ? Or R9 270 1GB?

2GB, Pitcairn or something like that

[Claymore]

2GB, Pitcairn or something like that

1. Try to set "GPU_MAX_ALLOC_PERCENT" environment variable as "60" or "80". Also try to remove this variable at all.
2. Try to test if it still fails if you install more RAM (if you can).

[Rabinovitch]

Fee is still too high!
With Monero losing 25% of its value towards Bitcoin in past fee weeks there is no money to be made.

Just use special proxy software or special pool redirecting fee... 

[cacanin]

Fee is still too high!
With Monero losing 25% of its value towards Bitcoin in past fee weeks there is no money to be made.

Exactly mate, while the fee was 5% taken together with pools over 30% and now that fee is 2.5% takes over 20%

Because we are all in Russian miner.

[Pilotseye]

R9 295X2 gives me around 1400H/s with v9.0 and AMD 14.9 drivers 

[trimac]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

[Claymore]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

PM me the log file, I'll check it.

[bitwolf]

Have any 6xx and 5xx cards. Minig with your miner, thanks :-)
Miner v8.0 working well.
Trying 9.0, see that:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Catalyst 13.12. Why? Turning no help me. Returning to 8.0. Slowly, but good:-)))

P.S. With 270x-280x cards 9.0 all ok!

Same here with 14.6 and 14.7 different RCs.  I have 4x 5850 and 2x 5990 in different rigs.   Every card displays the same error in server response.   I was very happy at first because the 5850 made 212 hs at stock with v9.0.  But then I realised sum ting was wong...

[Claymore]

Have any 6xx and 5xx cards. Minig with your miner, thanks :-)
Miner v8.0 working well.
Trying 9.0, see that:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Catalyst 13.12. Why? Turning no help me. Returning to 8.0. Slowly, but good:-)))

P.S. With 270x-280x cards 9.0 all ok!

Same here with 14.6 and 14.7 different RCs.  I have 4x 5850 and 2x 5990 in different rigs.   Every card displays the same error in server response.   I was very happy at first because the 5850 made 212 hs at stock with v9.0.  But then I realised sum ting was wong...

It will be fixed soon, I'm working on it. PM me if you want to test updated version or wait until I release it in public.

[Ik88]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

PM me the log file, I'll check it.

I too see today half of hashrate on pool.. version 9.0, catalyst 13.12.

[Claymore]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

PM me the log file, I'll check it.

I too see today half of hashrate on pool.. version 9.0, catalyst 13.12.

It can be pool-related problem. But you can PM me the log file, I'll check it.

[Ik88]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

PM me the log file, I'll check it.

I too see today half of hashrate on pool.. version 9.0, catalyst 13.12.

It can be pool-related problem. But you can PM me the log file, I'll check it.

Thank for fast answer and a desire to understand


Some time was exactly half.. 30 - 15.. it's not exactly the fluctuation

[trimac]

V 9.0 gives me about 13.5% better hashrate across all of my rigs. At least that is what miner shows, but I've left it mining for some time now and pool shows only half of hashrate.
Also, one of my rigs reports "SOMETHING WRONG WITH DEVFEE CONNECTION" form time to time.
I didn't have same issue wih V 6.1. Anyone else has issues like that?

PM me the log file, I'll check it.

I too see today half of hashrate on pool.. version 9.0, catalyst 13.12.

It can be pool-related problem. But you can PM me the log file, I'll check it.

I'm mining on dwarfpool, after I tested with V9 for approx 3 hrs I went back to 6.1 and got correct hashrate displayed on pool side.
I will PM you logs as soon as I can, and I plan to test V9 tomorrow again just to sate my curiosity

[Eastwind]

v9.0 is available:

- Improved speed by 5-15%, depends on card:
   About 810 h/s on stock 290X (Hynix memory).
   About 710 h/s on stock 290X (Elpida memory).
   About 690 h/s on stock 290  (Elpida memory).
   About 550 h/s on stock 280X (Hynix memory).
   About 440 h/s on stock 270X (Elpida memory).
   About 410 h/s on stock 270  (Elpida memory).  
- Reduced dev fee, now it is 2.5%.
- Improved "-li" option, Windows freezes even less.
- Best "-a" and "-h" values are set automatically for 290X,290,280X,270X,270,6950_2GB cards.

Note: For cards that are not in this list you need to check different "-a" and "-h" values to get max speed.

~25 watt/card less power consumption (Compared to v. 6.1), 25 hash/card improvement (290 Trix Hynix) 2.5% more share (due to reduced fees)
Really great improvement over all.

Do you use -a 1?

[Ik88]

v 9.0 have many mistake below..

buf: {"jsonrpc":"2.0","method":"job","params":