Claymore's CryptoNote AMD GPU Miner v11.3

[Tbone5660]

ASUS RX 470 underclocked 1100 core 1800 mem

540 H/s

140W from wall with EVGA 1000W G2, Celeron Dual core, ASrock H97 Mobo. ETH + SC uses about 180W.

Does Monero like fast memory? High core clocks?

Does anyone have some good Wattman settings for RX 480 mining XMR? I am making around 720 hs with memory over clocked to 2200 but its not stable.

[ps_jb]

Does anyone have some good Wattman settings for RX 480 mining XMR? I am making around 720 hs with memory over clocked to 2200 but its not stable.

Looks like very high number for rx 480. Check the temperature of card - it may throttle and cause instability

[hawkfish007]

Has anyone been able to run CrytoNote stable overnight? I had no success, CryptoNote will hang after 2-4 hours. The same rigs have been dual mining for months without any issue.

[someone307]

Could you remove printf buffering for this miner (and for the CPU version too)? At the moment, it's nearly impossible to redirect stdout to file, and some folks (there were such requests previously, according to google results) really need this for automation. Using auto-generated logs is not an option for some reasons.

It's only an one-line fix:

Code:

setvbuf(stdout, NULL, _IONBF, 0);

Thanks!

[citronick]

Has anyone been able to run CrytoNote stable overnight? I had no success, CryptoNote will hang after 2-4 hours. The same rigs have been dual mining for months without any issue.

I have converted my MSI R9-390s (my old ETH rigs) -- running stable 2 days now.

-tt 80 -a 4 -h 1372 mining at Dwarfpool

my Nanos and RX480s are still mining ETH though.

[ps_jb]

-tt 80 -a 4 -h 1372 mining at Dwarfpool

Do you think -h 1372 can be used for RX 480?

[citronick]

-tt 80 -a 4 -h 1372 mining at Dwarfpool

Do you think -h 1372 can be used for RX 480?

I tried it but didnt seems to have any difference.

So for Nanos and 480s, I just default and let miner do its thing.

Using default -a 1 and -h 1024 seems to be stable - its running the whole day.

Looks like mining at XMR.Nicehash, I get lower payout.... so back to Dwarfpool.

[ultimatum82]

Hello dear. I am a beginner and Mining at me to you have 2 questions. I have the video card Sapphire HD 6970 dual x. 384h acceleration and speed without intervention, 15.7 driver, miner Claymore 9.5. 1.5 days namaynil 0.16 .... Monroe. instructions to the programe Claymore stated that there is a fee for the use of 2.5%. My questions to the understanding and knowing forumcham

1) in the programe is necessary to register the value,, Dev ..? or the program itself takes 2.5% of the Committees?
 
2) my speed heshreyt 384, but a lot of errors and unsubstantiated blocks. as it should be, or there is a reason and explanation?
 
       
following the report of my miners----

:59:21:744   8a4   parse packet: 63
17:59:21:744   8a4   Share accepted
17:59:21:744   8a4   new buf size: 0
17:59:23:728   dcc   GPU 0: HashCnt = 768, time = 2013 ms, hashrate = 381 h/s
17:59:23:774   dcc   Round
17:59:25:803   610   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:25:819   610   Round
17:59:25:913   8a4   got 291 bytes
17:59:25:913   8a4   buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0203cb90b6be059e792e55328abfc8fc4da2bd707d4efb39a8c55a5b3c1afcd6a3344cfb4639c90 0000000bb17333c2e195db31d2c8774b3eea47678f0ff913f5f6bac867c82bf62f6df6d05","target":"afe01000","job_id":"f8c1679f-13a6-4ea4-9373-0548846746d9","time_to_live":5}}

17:59:25:913   8a4   parse packet: 291
17:59:25:913   8a4   new buf size: 0
17:59:25:913   8a4   df has same pool, skip
17:59:25:913   8a4   09/05/16-17:59:25 - New job received from xmr.pool.minergate.com:45560
17:59:25:913   8a4   Speed: 339 h/s, TotalHashes: 54K, DevHashes: 0K Mining time:
17:59:25:913   8a4   00:02
17:59:26:817   dcc   Job changed, drop current round
17:59:26:817   dcc   Round
17:59:26:817   610   Job changed, drop current round
17:59:26:833   610   Round
17:59:28:878   dcc   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:28:878   dcc   Round
17:59:30:913   610   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:30:928   610   Round
17:59:32:958   dcc   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:32:989   dcc   Round
17:59:35:023   610   GPU 0: HashCnt = 768, time = 2013 ms, hashrate = 381 h/s
17:59:35:031   610   Round
17:59:37:066   dcc   GPU 0: HashCnt = 768, time = 2000 ms, hashrate = 384 h/s
17:59:37:066   dcc   Round
17:59:38:737   8a4   got 291 bytes
17:59:38:737   8a4   buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0203d790b6be05410cb45ce724dec5fb348400b842e71a225ea8d272277257d38264b454c8ddf00 0000000a62ad9b3248eb0688d7405a5bae29bff7efa79fc69d1a3a106a50859a92d85e405","target":"c0311200","job_id":"d21775f4-69da-4404-a9cd-5772e289cd1b","time_to_live":5}}

17:59:38:737   8a4   parse packet: 291
17:59:38:737   8a4   new buf size: 0
17:59:38:737   8a4   df has same pool, skip
17:59:38:737   8a4   09/05/16-17:59:38 - New job received from xmr.pool.minergate.com:45560
17:59:38:737   8a4   Speed: 338 h/s, TotalHashes: 58K, DevHashes: 0K Mining time:
17:59:38:737   8a4   00:02
17:59:39:004   610   Job changed, drop current round
17:59:39:004   610   Round
17:59:39:004   dcc   Job changed, drop current round
17:59:39:004   dcc   Round
17:59:41:064   610   GPU 0: HashCnt = 768, time = 2018 ms, hashrate = 380 h/s
17:59:41:079   610   round found 1 shares
17:59:41:079   610   Round
17:59:41:095   8a4   09/05/16-17:59:41 - SHARE FOUND (target 3602) - (GPU 0 of 1)
17:59:41:142   8a4   got 63 bytes
17:59:41:142   8a4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

17:59:41:142   8a4   parse packet: 63
17:59:41:142   8a4   Share accepted
17:59:41:142   8a4   new buf size: 0
17:59:42:187   11f4   watchdog - thread 0, hb time 3183
17:59:42:187   11f4   watchdog - thread 1, hb time 1108
17:59:43:107   dcc   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:43:123   dcc   Round
17:59:45:158   610   GPU 0: HashCnt = 768, time = 2000 ms, hashrate = 384 h/s
17:59:45:172   610   Round
17:59:47:197   dcc   GPU 0: HashCnt = 768, time = 1998 ms, hashrate = 384 h/s
17:59:47:197   dcc   round found 2 shares
17:59:47:197   dcc   Round
17:59:47:212   8a4   09/05/16-17:59:47 - SHARE FOUND (target 3602) - (GPU 0 of 1)
17:59:47:212   8a4   09/05/16-17:59:47 - SHARE FOUND (target 3602) - (GPU 0 of 1)
17:59:47:341   8a4   got 63 bytes
17:59:47:341   8a4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

17:59:47:341   8a4   parse packet: 63
17:59:47:342   8a4   Share accepted
17:59:47:342   8a4   new buf size: 0
17:59:47:572   8a4   got 63 bytes
17:59:47:572   8a4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

17:59:47:572   8a4   parse packet: 63
17:59:47:572   8a4   Share accepted
17:59:47:572   8a4   new buf size: 0
17:59:49:228   610   GPU 0: HashCnt = 768, time = 2001 ms, hashrate = 383 h/s
17:59:49:248   610   Round
17:59:51:310   dcc   GPU 0: HashCnt = 768, time = 2024 ms, hashrate = 379 h/s
17:59:51:327   dcc   round found 1 shares
17:59:51:327   dcc   Round
17:59:51:328   8a4   09/05/16-17:59:51 - SHARE FOUND (target 3602) - (GPU 0 of 1)
17:59:51:370   8a4   got 63 bytes
17:59:51:370   8a4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

17:59:51:370   8a4   parse packet: 63
17:59:51:370   8a4   Share accepted
17:59:51:370   8a4   new buf size: 0
17:59:53:343   610   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:53:358   610   round found 1 shares
17:59:53:358   610   Round
17:59:53:374   8a4   09/05/16-17:59:53 - SHARE FOUND (target 3602) - (GPU 0 of 1)
17:59:53:421   8a4   got 63 bytes
17:59:53:421   8a4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

17:59:53:421   8a4   parse packet: 63
17:59:53:421   8a4   Share accepted
17:59:53:421   8a4   new buf size: 0
17:59:55:386   dcc   GPU 0: HashCnt = 768, time = 2002 ms, hashrate = 383 h/s
17:59:55:402   dcc   Dev round
17:59:57:447   610   GPU 0: HashCnt = 768, time = 2000 ms, hashrate = 384 h/s
17:59:57:463   610   Round
17:59:59:479   dcc   GPU 0: HashCnt = 768, time = 1999 ms, hashrate = 384 h/s
17:59:59:494   dcc   dev round found 2 shares
17:59:59:494   dcc   Round
17:59:59:510   127c   DevFee: 09/05/16-17:59:59 - SHARE FOUND (target 1063) - (GPU 0 of 1)
17:59:59:510   127c   DevFee: 09/05/16-17:59:59 - SHARE FOUND (target 1063) - (GPU 0 of 1)

[ivcelmik]

Hi can u someone help me with a bat file for Fury.Thx in advance

[Lucide]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

[Lafu]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

[citronick]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

see OP FAQ:

Catalyst 13.12 is required for best performance and compatibility. Catalyst 14.x and 15.x are supported as well (usually 14.x/15.x are about 1% slower than 13.12), use appropriate version.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

[Lucide]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

see OP FAQ:

Catalyst 13.12 is required for best performance and compatibility. Catalyst 14.x and 15.x are supported as well (usually 14.x/15.x are about 1% slower than 13.12), use appropriate version.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

I use one gup unit HD5450/2Gb
virtual memory on windows 8.1 set to 20000MB
Catalyst 14.10 was selected by AMD as bet fit
and of course i did set GPU_MAX_ALLOC_PERCENT to 100
my command line is NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -a 3

[EvilC0P]

Just got 2 MSI Radeon RX 480 8GB ddr5.
Core Clock @ 1305 , Memory clock @ 2000

currently running drivers version 16.20 ( what came on the MSI DVD )

also i got banned from a pool , minexmr.com, while doing testing ( stopping the miner, starting it again,... ) ; is that normal?

using -a 1 or 2  ; i get ~634h/s per card at dwarfpool, so technically that's 1.2k/s right. but dwarfpool estimates  ~1k/s .is it the pool that doesn't know how to count or i'm losing some power on the way lol
using -a 3 ; i get ~620h/s. went down slightly

and this setx GPU_MAX_ALLOC_PERCENT 100 , do i have to run it everytime in my .bat file before mining?

[Lafu]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

see OP FAQ:

Catalyst 13.12 is required for best performance and compatibility. Catalyst 14.x and 15.x are supported as well (usually 14.x/15.x are about 1% slower than 13.12), use appropriate version.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

I use one gup unit HD5450/2Gb
virtual memory on windows 8.1 set to 20000MB
Catalyst 14.10 was selected by AMD as bet fit
and of course i did set GPU_MAX_ALLOC_PERCENT to 100
my command line is NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -a 3

Use this in your command line NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -li 1  --add-priority-node  this is a old card or ?

[io8621]

Some numbers:

sapphire r7 370 2gb -a4 -h 512 ~520 card
sapphire r8 280x 3 gb -a4 -h 832 ~580 card
sapphire r9 380 -a4 -h 864 ~650 card

Has anyone tested Sapphire Radeon RX 470 NITRO OC  4GB GDDR5 without bios mod,
standard clock 1216 gpu / 7000 ram?

Thanks.

[Lucide]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

see OP FAQ:

Catalyst 13.12 is required for best performance and compatibility. Catalyst 14.x and 15.x are supported as well (usually 14.x/15.x are about 1% slower than 13.12), use appropriate version.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

I use one gup unit HD5450/2Gb
virtual memory on windows 8.1 set to 20000MB
Catalyst 14.10 was selected by AMD as bet fit
and of course i did set GPU_MAX_ALLOC_PERCENT to 100
my command line is NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -a 3

Use this in your command line NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -li 1  --add-priority-node  this is a old card or ?

new card but quite old release 2010 i think.   what do you mean by --add-priority-node ?

[Lafu]

what is this error ?
GPU 0, GpuMiner k1a failed -55 ?
thanks

Show me your bat file or config you use than we can help!!!!

GPU 0 = you use one Card right ?

Try to set at least 16 GB of Virtual Memory

see OP FAQ:

Catalyst 13.12 is required for best performance and compatibility. Catalyst 14.x and 15.x are supported as well (usually 14.x/15.x are about 1% slower than 13.12), use appropriate version.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

I use one gup unit HD5450/2Gb
virtual memory on windows 8.1 set to 20000MB
Catalyst 14.10 was selected by AMD as bet fit
and of course i did set GPU_MAX_ALLOC_PERCENT to 100
my command line is NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -a 3

Use this in your command line NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -li 1  --add-priority-node  this is a old card or ?

new card but quite old release 2010 i think.   what do you mean by --add-priority-node

NsGpuCNMiner -o stratum+tcp://xmr.pool.minergate.com:45560 -u muemail -p x -li 1  --add-priority-node   <----- In your runminer.bat

Try it

[citronick]

So far I have tried Dwarfpool and Nicehash - after 3 days of mining - my rigs have stabilised but I am still not satisfied of which pool is best for my rigs (3 types= 5 x MSI-R390, 6 x Sapphire R9-Nano, 6 x Sapphire RX480)

Anybody have good feedback on other XMR pools?

[adamvp]

Some numbers:

sapphire r7 370 2gb -a4 -h 512 ~520 card
sapphire r8 280x 3 gb -a4 -h 832 ~580 card
sapphire r9 380 -a4 -h 864 ~650 card

Has anyone tested Sapphire Radeon RX 470 NITRO OC  4GB GDDR5 without bios mod,
standard clock 1216 gpu / 7000 ram?

Thanks.

Stock clocks? I had gigabytes 370 about 440
And 280x xfx about 530..
With default clocks and settings...