Claymore's CryptoNote AMD GPU Miner v11.3

[Claymore]

 hello - new to this thread, and the miner (TYVM Claymore), did a quick search, and it seems the question was last asked about 1 year ago, hope you don't mind if i ask again - is there a solo version released or in planning? i understand i can install a local private pool if i need to ... thanks

There is no solo version, so the only option to mine solo is to setup private pool.

[grouper fish]

will there be an update for the new AMD cards?

There are not really new cards from AMD for now. All new models are based on old core, so you can adjust "-a" and "-h" parameters of miner to find best values if your card name is not displayed when miner is started. Miner detects most popular cards and set best "-a" and "-h" parameters for them, but I don't have all possible cards here. You can ask for best settings for your card here, probably someone has same card and will share best settings.

Is this also true for the upcoming fury cards?

[Claymore]

will there be an update for the new AMD cards?

There are not really new cards from AMD for now. All new models are based on old core, so you can adjust "-a" and "-h" parameters of miner to find best values if your card name is not displayed when miner is started. Miner detects most popular cards and set best "-a" and "-h" parameters for them, but I don't have all possible cards here. You can ask for best settings for your card here, probably someone has same card and will share best settings.

Is this also true for the upcoming fury cards?

CN algo requires fast memory. Some of "Fury" cards will have new memory, it must improve mining speed, so let's wait when they are available to test them.

[Maxus]

Anyone had any luck getting their MSI AMD R9 380 to work with 9.3 version of the miner?

Mine keeps getting "LowDifficultyShare" which seems to be because of the catalyst 15.1 drivers (I've tired all of the -a options and the h option).

Sadly the 14.7 drivers don't support the card as its newish.

Thanks!

[Claymore]

Anyone had any luck getting their MSI AMD R9 380 to work with 9.3 version of the miner?

Mine keeps getting "LowDifficultyShare" which seems to be because of the catalyst 15.1 drivers (I've tired all of the -a options and the h option).

Sadly the 14.7 drivers don't support the card as its newish.

Thanks!

Ok, I will release version for Catalyst 15.x within 24 hours.

[Maxus]

Thank you good sir!

[Claymore]

v9.3 for Catalyst 15.x are available for downloading. In my first tests (290X cards only) it has same performance as for Catalyst 14.x.

[Maxus]

Thank you for the awesomely quick turn around! I will test it and provide feedback.

[Maxus]

Appears to work great, thank you!

[Lloydimiller4]

Appears to work great, thank you!

What hashes are you pulling with the R9 380? how much wattage too if you cant check.

[sangoku]

v9.3 for Catalyst 15.x are available for downloading. In my first tests (290X cards only) it has same performance as for Catalyst 14.x.

No Linux version ? ;-)

[GingerAle]

Appears to work great, thank you!

What hashes are you pulling with the R9 380? how much wattage too if you cant check.

Please, pretty please post this!

[grouper fish]

anyone tried a fury card yet?

[Claymore]

v9.3 for Catalyst 15.x are available for downloading. In my first tests (290X cards only) it has same performance as for Catalyst 14.x.

No Linux version ? ;-)

You know I don't like Linux a bit May be later, not right now.

[BoscoMurray]

Hi Claymore

I've been using v9.3 beta on Windows to mine AEON for a while, but they are changing their PoW from CryptoNight to CryptoNight Lite  https://bitcointalk.org/index.php?topic=641696.msg11881396#msg11881396

Any chance you could incorporate this into your GPU miner?

Cheers
Bosco

[Arux]

i make the same request, AEON will not be amd gpu mineable after the hard fork without modification of your miner Claymore.

here the official announce of the hard fork:

Release Phoenix

I'm pleased to announce Release Phoenix of AEON (0.9.0.0). This release brings the following changes since the last official version:

Hard fork at block height 592000 changing PoW to Cryptnight-Lite and block target to 4 minutes
...

...
Source code can be downloaded from https://github.com/aeonix/aeon/releases, with binaries to be added soon.

This update is mandatory for all users prior to block 592000 (approximately August 4, 2015)

thanks!

[imihal44]

Well...same request as above,about AEON ..to be possible to mine it after hard fork with Claymore miner...thx:)

[muchoman]

And one more time about AEON, I wish the same 

[myagui]

Is it ok that I post here wishing the opposite?  For once let me hoard some coins with my nvidias 

[Eliovp]

anyone tried a fury card yet?

I would like to test on my Fury's, but as there is no recent Linux version, i'm unable to.

older version doesn't work.


Greetings


Edit: tested on the latest Linux version.

here are some results.

19:20:12:151    23fff700        GPU 1: HashCnt = 1024, time = 792 ms, hashrate = 1292 h/s
19:20:12:164    237fe700        GPU 2: HashCnt = 1024, time = 795 ms, hashrate = 1288 h/s
19:20:12:167    23fff700        Round
19:20:12:174    237fe700        Round
19:20:12:217    29ea5700        GPU 0: HashCnt = 1024, time = 815 ms, hashrate = 1256 h/s
19:20:12:235    29ea5700        Round
19:20:12:960    28ea3700        GPU 1: HashCnt = 1024, time = 791 ms, hashrate = 1294 h/s
19:20:12:978    22ffd700        GPU 2: HashCnt = 1024, time = 795 ms, hashrate = 1288 h/s
19:20:12:978    28ea3700        Round
19:20:12:990    22ffd700        Round
19:20:13:051    296a4700        GPU 0: HashCnt = 1024, time = 816 ms, hashrate = 1254 h/s
19:20:13:067    296a4700        Round
19:20:13:770    23fff700        GPU 1: HashCnt = 1024, time = 792 ms, hashrate = 1292 h/s
19:20:13:787    23fff700        Round
19:20:13:793    237fe700        GPU 2: HashCnt = 1024, time = 796 ms, hashrate = 1286 h/s
19:20:13:804    237fe700        round found 3 shares
19:20:13:804    237fe700        Round
19:20:13:804    227fc700        07/24/15-19:20:13 - SHARE FOUND (target 2500) - (GPU 2 of 3)
19:20:13:805    227fc700        07/24/15-19:20:13 - SHARE FOUND (target 2500) - (GPU 2 of 3)

So i guess around 1300 h/s on 1 Fury, complete rig was doing around 490 Watt, That's nothing..