Claymore's CryptoNote AMD GPU Miner v11.3

[JWGeek]

Install GPU-Z and see how many cards are there. It should be 4 x 7900 series. If not then there is a problem in your sistem...

all four are there however the OpenCL check box is unchecked and it will not allow me to check it. so confused!

Then you have to reinstall the drivers.

uninstalled and run amd's clean uninstall tool. then reinstalled the drivers. still no dice.

[1714180093]

1714180093

[1714180093]

1714180093

[1714180093]

1714180093

[citronick]

In a multi rig environment, what is the simplest way to see each rig hashrate. alive/dead status etc.?

[BogdanCo]

Install GPU-Z and see how many cards are there. It should be 4 x 7900 series. If not then there is a problem in your sistem...

all four are there however the OpenCL check box is unchecked and it will not allow me to check it. so confused!

Then you have to reinstall the drivers.

uninstalled and run amd's clean uninstall tool. then reinstalled the drivers. still no dice.

What version of the Drivers are you using?

[JWGeek]

Install GPU-Z and see how many cards are there. It should be 4 x 7900 series. If not then there is a problem in your sistem...

all four are there however the OpenCL check box is unchecked and it will not allow me to check it. so confused!

Then you have to reinstall the drivers.

uninstalled and run amd's clean uninstall tool. then reinstalled the drivers. still no dice.

What version of the Drivers are you using?

I have tried;
radeon-crimson-16.7.3-win10-64bit
non-whql-win10-64bit-radeon-software-crimson-16.9.1-sep7
13-12_win7_win8_64_dd_ccc_whql-[Guru3D.com]

Trying to see if its something to do with opencl but not sure how to uninstall it or if that is even an option

EDIT

OK so i fixed it, I usually access the miner by remote desktop but instead i turned it off and plugged a spare monitor into the card that didn't work. turned it on and instead of taking the usual 10 seconds to fire up it took like 2 mins but when it finally loaded the desktop i can now see all 4 cards in gpuz. Not sure how plugging the monitor into the second card made it spring to lift but i'll chalk it up as a win.

thanks for replying to my questions

JWGeek

[ajqjjj]

Hi, is normal devhashes 0k?

[Prelude]

Hi, is normal devhashes 0k?

You've literally been mining for a minute.....

[frediiii]

I would like to report ~640 hashes for the MSI RX 480 8GB.  ~680 hashes with memory OC'ed to 2100 via MSI AB.  Wattman is too touchy for me.

I see similar results with the Sapphire RX 480 8GB: ~630h/s stock and staying surprisingly cool

[megacrypto]

I'm sure its asked and answered a million times, but I can't seem to find it (i 'be been searching for some hours now and this is a veryyyy long thread..my apologies)

how can I run it on Linux/Ubuntu (14.04.4) with fglrx from repo (which I believe its 15.12)?

Posted From bitcointalk.org Android App

[xalen]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

[Claymore]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

It's a good idea to ask Nicehash why the pool sends "Unauthorized worker" error.

[xalen]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

It's a good idea to ask Nicehash why the pool sends "Unauthorized worker" error.

So why then there is no errors when I use "-nofee 1"

[Claymore]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

It's a good idea to ask Nicehash why the pool sends "Unauthorized worker" error.

So why then there is no errors when I use "-nofee 1"

Because in this mode miner creates only one connection. In normal mode it creates two connections - one for main mining and one for devfee mining. It seems nicehash does not like second connection. Why? I have no idea.

[BTCBusinessConsult]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

It's a good idea to ask Nicehash why the pool sends "Unauthorized worker" error.

So why then there is no errors when I use "-nofee 1"

So just use the normal setup and stop trying to be a cheapshit. Give claymore alittle reward for his work because without him you wouldnt be mining....

[Claymore]

Hello.

I already wrote about my problem but didn't get any answer.

When I mine at Nicehash miner shows errors:

16:25:15:158 dd0 parse packet: 76
16:25:15:159 dd0 Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":24,"message":"Unauthorizedworker"}}
16:25:15:160 dd0 buf was cleared

16:38:31:026 d14 Round
16:38:31:045 564 SOMETHING WRONG WITH DEVFEE CONNECTION. STOP MINING.
16:38:31:051 564 Reconnect in 30 sec...

But with "nofee" or at Dwrfpool didn't get them

It's a good idea to ask Nicehash why the pool sends "Unauthorized worker" error.

So why then there is no errors when I use "-nofee 1"

So just use the normal setup and stop trying to be a cheapshit. Give claymore alittle reward for his work because without him you wouldnt be mining....

Please read carefully before commenting - he cannot use miner on nicehash pool without "-nofee" because of the error that pools sends.

About the problem - it seems it depends on pool addess, I see this problem on eu server but this pool works fine for me: stratum+tcp://cryptonight.usa.nicehash.com:3355

[xalen]

About the problem - it seems it depends on pool addess, I see this problem on eu server but this pool works fine for me: stratum+tcp://cryptonight.usa.nicehash.com:3355

Tried all nicehash servers, same error everywhere. Strange but few days ago was normal only at hk server

[OverEasy]

Same here...Currently only way to mine at Nicehash is turn off fee's. I don't wanna turn off fees. I want to support you. Looking forward to a fix.
Thank you for a superior product!

[Bakery]

Same here...Currently only way to mine at Nicehash is turn off fee's. I don't wanna turn off fees. I want to support you. Looking forward to a fix.
Thank you for a superior product!

what's up with all this nicehash mining anyway?
Give me one reason why nicehash is more profitable than dwarfpool.

[Claymore]

I contacted Nicehash, they have no idea what happens. The main problem is that sometimes it works and sometimes not so I cannot reproduce it when I want. The problem is on pool side anyway.

EDIT: They block connections which are from many different IPs and for same wallet address. In other words, their botnet protection system blocks devfee mining.
So, though I made support for this pool, currently Nicehash is not supported.

[OverEasy]

BTW I am also using your CPU CryptoNight miner which is working just great with Nicehash and fees turned on

09/15/16-15:56:42 - New job received from cryptonight.usa.nicehash.com:3355
Speed: 246 h/s, TotalHashes: 7583K, DevHashes: 188K Mining time: 08:43

[ivcelmik]

With a Fury i get 800 h/s with hashcount=832 any sugestions to increase hashrate

Thx in advance