Claymore's CryptoNote AMD GPU Miner v11.3

[herosrise]

Hi all,
Can anyone tell me the hash rate of my lab sony vaio - 64 bit core i3-2350M processor 2.30 GHZ?
And how much approximately it can generate monero per day?

[romullo]

"-wd 0" para desativar watchdog. this is solution.

[citronick]

Hi all,
Can anyone tell me the hash rate of my lab sony vaio - 64 bit core i3-2350M processor 2.30 GHZ?
And how much approximately it can generate monero per day?

cant get much from a notebook computer.... and running it 24x7 will likely fry it because its not designed to mine 24x7

[gegstore]

Supported coins:
XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION.
=========================

CPU version is here:
https://bitcointalk.org/index.php?topic=647251.0

Current version: 9.6:

- Added remote monitoring, see "-mport" option and "Remote manager" folder. Note that only remote monitoring is supported, other commands in EthMan don't work.
- Added temperature management for 4xx cards.
- Added coloring, see "-colors" option.


Link:
https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A

Mirror:
https://drive.google.com/folderview?id=0B69wv2iqszefdkVDNkxla3BCZHc&usp=sharing

This is POOL version.

Catalyst 15.12 is required for best performance and compatibility.

Set "GPU_MAX_ALLOC_PERCENT" environment variable as "100".

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

This miner is free-to-use, however, current developer fee is 2.5%, miner mines 39 rounds for you and 1 round for developer.
If you don't agree with dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate.

This version is for recent AMD videocards only: 7xxx and 2xx, also 6xxx and 5xxx. No nVidia support.

This version is for Windows x64 only. No 32-bit support.

Linux version also requires AMD APP SDK installed. Linux version has been tested in Cent 6.5 and Ubuntu 14.04.

Miner has built-in GPU overclocking features and temperature management.



COMMAND LINE OPTIONS:

-o    pool address. Both HTTP and Stratum protocol are supported. You can specify several "-o" parameters to use several pools, or use "pools.txt" file, or use both.
   First pool specified via "-o" option is main pool: miner will switch to main pool every 30 minutes.

-u    your wallet address.

-p    password, use "x" as password.

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs.

-a   Select algorithm:
   "-a 0" (default) means autoselection.
   "-a 1" fastest mining mode for 290/290x and 270/270x cards.
   "-a 2" low power consumption mode for 290/290x cards. A bit less speed (1%) but less power consumption (10-15%).
   "-a 3" fastest mining for old cards (6xxx and 5xxx).
   "-a 4" fastest mining for recent cards (280x, 270/270x etc).
   You can also specify mode for every card separately, for example, "-a 1234".
   It is very important for good mining speed to select correct "-a" and "-h" values for your cards.
   For old cards 5xxx and 6xxx use "-a 3" mode only, otherwise you can get "LowDifficultyShare" errors from pool.

-wd    watchdog option. Use "-wd 1" to enable watchdog, miner will be closed if any thread is not responding for 1 minute or OpenCL call failed,
   so you can restart it from some script if some GPU does not respond.

-ee    close miner if no more pools are available in the list. By default, miner tries all pools one by one, after last pool it tries first pool again and so on.
Use "-ee 1" to close miner when it tried all pools, so you can restart it from some script and do some additional actions related to internet connectins if necessary.

-dbg   debug log and messages. "-dbg 0" (default) - create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >0 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.

-li   Low intensity mode. Specify "-li 1" if you don't want Windows to freeze.

-nofee: set "1" to cancel my developer fee at all. In this mode some recent optimizations are disabled so mining speed will be slower by about 5%.
   By enabling this mode, I will lose 100% of my earnings, you will lose only 2.5% of your earnings.
   So you have a choice: "fastest miner" or "completely free miner but a bit slower".
   If you want both "fastest" and "completely free" you should find some other miner that meets your requirements, just don't use this miner instead of claiming that I need
   to cancel/reduce developer fee, saying that 2.5% developer fee is too much for this miner and so on.

-tt   set target GPU temperature. For example, "-tt 80" means 80C temperature. This option enables temperature management for all installed cards.

-h   number of hashes that GPU processes during one round (HashCnt). If not specified, default value is used. For many cases you can increase performance by adjusting this parameter value.
   For example, "-h 832" means HashCnt=832 for all cards. You can also specify values for every card, for example "-h 640,832,1376,0", zero value means autoselection.
   Values must be divisible by 32, otherwise near value that is divisible by 32 will be selected.
   Use "m", "+" and "-" keys to find the best value. One hash takes about 2MB of GPU memory, too big value may cause unstable mining and in many cases max value is not the best.
   For example, for 280x card the best value is 832. For 290x card the best value is 1376.
   For most popular cards miner sets the best value automatically, but there are many cards and I don't have them all, so you can find the best "-h" value by yourself.
   Press "m" key to see current hashrate for every GPU round, then use "+" and "-" keys to increase/reduce "-h" value. You can also press "0"..."9" keys to select active card.
   Sometimes changing "HashCnt" by "+" and "-" keys causes problems with OpenCL, in this case you need to restart miner and change "-h" values in command line directly.

-cclock   set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".

-mclock   set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0".

-mport   remote monitoring port. Default port is 3333, specify "-mport 0" to disable remote monitoring feature.

-colors enables or disables colored text in console. Default value is "1", use "-colors 0" to disable coloring.



SAMPLE USAGE

NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -p x

Do not forget to specify your wallet address!



FAILOVER

Use "-o" option or "pools.txt" file to specify several pools. Every pool has 3 connection attempts. "pools.txt" file has text format, one address per line.
If the first character of a line is ";" this line will be ignored.
After pool address you can also specify login and password, use space as separator, for example:

mro.pool.minergate.com:5556 yourmail@gmail.com !

or

stratum+tcp://mine.moneropool.org:80 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 x

If login or password are not specified, "-u" and "-p" parameters will be used.



PERFORMANCE

About 810 h/s on stock 290X (Hynix memory).
About 710 h/s on stock 290X (Elpida memory).
About 690 h/s on stock 290  (Elpida memory).
About 550 h/s on stock 280X (Hynix memory).
About 440 h/s on stock 270X (Elpida memory).
About 410 h/s on stock 270  (Elpida memory).


TROUBLESHOOTING

1. Install Catalyst v15.12.
2. Disable overclocking.
3. Set GPU_MAX_ALLOC_PERCENT 100.
4. Set Virtual Memory 16 GB.
5. Reboot computer.



TUNING

For 290X/290/280X/270X/270 you can leave default parameters, i.e. do not specify "-a" and "-h", miner will apply best settings automatically.

For other cards, guide how to get maximal speed:

1. Try "-a 1", "-a 3", "-a 4" and select best mode, press "m" key to see immediate hashrate.
2. Remember "HashCnt" value when miner starts, then specify "-h" parameter with this value, remember hashrate and change "-h" parameter step by step by 32 in both directions (less and more).
   Select best value based on immediate hashrate.

i don't see temperature in ethman

[LithStud]

Hi, has anyone encountered an issue with mining XMR on dwarfpool where you get "No new jobs were received for 20 mins - something wrong with this pool, disconnect." it then recconects and all seems working but in status window of worker those shares never shows up?

If needed i have the log file.

EDIT: Apparently it doesnt even need to give that error. I see shares beeing found but it doesnt appear on status window https://dwarfpool.com/xmr/address?wallet=47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.a99c611d0a7251d64812c429de38a9dd5abbeb311b62afd117f35cfdede8d9a2
the gab can be seen also there is no latest ones either.

[gegstore]

Hi, has anyone encountered an issue with mining XMR on dwarfpool where you get "No new jobs were received for 20 mins - something wrong with this pool, disconnect." it then recconects and all seems working but in status window of worker those shares never shows up?

If needed i have the log file.

EDIT: Apparently it doesnt even need to give that error. I see shares beeing found but it doesnt appear on status window https://dwarfpool.com/xmr/address?wallet=47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.a99c611d0a7251d64812c429de38a9dd5abbeb311b62afd117f35cfdede8d9a2
the gab can be seen also there is no latest ones either.

mine here is best of dwarfpool
http://monero.crypto-pool.fr/

[antantti]

Hashrates of mine, some overclocked:

Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s


If you want more details ask.
Soon I'll update with wattage info..

Waiting for that wattage info...

Why is 5830 doing more than 5850?

[mrbubl3s]

Hashrates of mine, some overclocked:

Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s


If you want more details ask.
Soon I'll update with wattage info..

Waiting for that wattage info...

Why is 5830 doing more than 5850?

No idea, visiontek has kind of a crappy rep, could also have something to do with bad memory.

Wattage is much better than expected, my cypresses are 90-120w at 250h/s... Sshhh
Another machine with a 390 and 290 with phenom ii x4 965 on cryptonote is pulling ~450w.

[vitalis48pm]

Hey. I have a problem. appears periodically Error in server response
: { "Id": 1, "jsonrpc": "2.0", "error": { "code": - 1, "message": "Unauthenticated"}}. It is on the dwarfpool and monero.crypto-pool.fr. What to do? I read old forum.Tam also asked this question. But I have not found an answer. Thank you.

[delle54]

Similar problem here. Mining on a CPU (i5 6600K), I get the following errors very often:

Stratum - connecting to 'xmr.pool.minergate.com' <176.9.147.178> port 45560
Stratum - connected
Pool Diff 4252
09/28/16-13:11:22 - SHARE FOUND <target 4252> - <THR 0 of 1>
cannot find block data:
{"jsonrpc":"2.0,"error":{"code":-42,"message":"Timeout"},"result":null}
cannot convert blob data
09/28/16-13:12:08 - SHARE FOUND <target 4252> - <THR 0 of 1>
09/28/16-13:13:52 - New job received from xmr.pool.minergate.com:45560
.
.
.
Speed: 70 h/s, TotalHashes: 6131K, DevHashes: 152K Mining time: 24:29
cannot find block data:
{"jsonrpc":"2.0,"error":{"code":-42,"message":"Timeout"},"result":null}
cannot convert blob data
.
.
.
09/28/16-13:18:40 - SHARE FOUND <target 4252> - <THR 0 of 1>
DevFee: 09/28/16-13:19:16 - SHARE FOUND <target 4252> - <THR 0 of 1>
Stratum - socket send failed 10053, disconnect
Stratum - connecting to 'xmr.pool.minergate.com' <176.9.147.178> port 45560
Stratum - connected

[JWGeek]

Hey, loving the miner. Is there a way to get the temperature read outs without setting a target temp? I have my fans on a custom fan profile in msi afterburner but would like to be able to see temps in the readout. cheers

[EvilC0P]

@claymore
I like the new v9.6
the remote tool is great. tested it with only 1 mining computer but i couldn't see the Temperature of my gfx cards ( i have 2 MSI RX 480 8gb ).
Anything i need to do to get this feature to work properly? I know after runing the application Ethman.exe , an option.ini is generated. didn't take a look at it yet, was late last night when i played with it.

Also the -cclock and -mclock didn't do anything for me, i have to say that i use the 16.x drivers ; i know you mention that 15.x works better with your miner, would it be a problem with my drivers?

keep up the good work, if you could fix these details and "upgrade" your miner to be more efficient with 16.x drivers. i would be happy.
I am waiting to receive 5 more RX 480, so more hash your way soon!

[Claymore]

@claymore
I like the new v9.6
the remote tool is great. tested it with only 1 mining computer but i couldn't see the Temperature of my gfx cards ( i have 2 MSI RX 480 8gb ).
Anything i need to do to get this feature to work properly? I know after runing the application Ethman.exe , an option.ini is generated. didn't take a look at it yet, was late last night when i played with it.

Also the -cclock and -mclock didn't do anything for me, i have to say that i use the 16.x drivers ; i know you mention that 15.x works better with your miner, would it be a problem with my drivers?

keep up the good work, if you could fix these details and "upgrade" your miner to be more efficient with 16.x drivers. i would be happy.
I am waiting to receive 5 more RX 480, so more hash your way soon!

If you use Windows, overclocking must work, check the log for details.

[EvilC0P]

@claymore
I like the new v9.6
the remote tool is great. tested it with only 1 mining computer but i couldn't see the Temperature of my gfx cards ( i have 2 MSI RX 480 8gb ).
Anything i need to do to get this feature to work properly? I know after runing the application Ethman.exe , an option.ini is generated. didn't take a look at it yet, was late last night when i played with it.

Also the -cclock and -mclock didn't do anything for me, i have to say that i use the 16.x drivers ; i know you mention that 15.x works better with your miner, would it be a problem with my drivers?

keep up the good work, if you could fix these details and "upgrade" your miner to be more efficient with 16.x drivers. i would be happy.
I am waiting to receive 5 more RX 480, so more hash your way soon!

If you use Windows, overclocking must work, check the log for details.

Sounds good, i'll try again tonight and check the logs to see what's wrong.

Any idea about the temperature not showing in Ethman.exe (the remote tool)?

[Claymore]

@claymore
I like the new v9.6
the remote tool is great. tested it with only 1 mining computer but i couldn't see the Temperature of my gfx cards ( i have 2 MSI RX 480 8gb ).
Anything i need to do to get this feature to work properly? I know after runing the application Ethman.exe , an option.ini is generated. didn't take a look at it yet, was late last night when i played with it.

Also the -cclock and -mclock didn't do anything for me, i have to say that i use the 16.x drivers ; i know you mention that 15.x works better with your miner, would it be a problem with my drivers?

keep up the good work, if you could fix these details and "upgrade" your miner to be more efficient with 16.x drivers. i would be happy.
I am waiting to receive 5 more RX 480, so more hash your way soon!

If you use Windows, overclocking must work, check the log for details.

Sounds good, i'll try again tonight and check the logs to see what's wrong.

Any idea about the temperature not showing in Ethman.exe (the remote tool)?

"-tt 1" must help.

[thrmo]

I'm running latest version, the problem was the same with the previous version tho, with two rx 480 nitro + 4gb. I've tried everything, overclocking, undervolting, etc... but despite that i cant seem to get past 550h/s on each, is this normal?

I'm using 16.9.2 drivers but the problem was the same with 16.9.1.

Atm i'm running the core undervolted at 1266 mhz and the memory overclocked at 1850 mhz.

Here is my config atm:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100

[Lerrcey]

how many hashing power can i get with XMR and 6 cards from type AMD 480?

630h/s out of the box, pulling around 100w per card. Thats my experience anyway. Others have posted similar results.

4GB or 8GB cards?

I have 6x480 4GBs which are 580-90 each stock. Clock to about 650 ish

[ajareselde]

Hashrates of mine, some overclocked:

Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s


If you want more details ask.
Soon I'll update with wattage info..

5850 gives me 230 with no OC. whats your settings? OC'd should put out 250 or even more,depending on how far u push it.
Efficiency is another thing tho..

[EvilC0P]

@claymore
I like the new v9.6
the remote tool is great. tested it with only 1 mining computer but i couldn't see the Temperature of my gfx cards ( i have 2 MSI RX 480 8gb ).
Anything i need to do to get this feature to work properly? I know after runing the application Ethman.exe , an option.ini is generated. didn't take a look at it yet, was late last night when i played with it.

Also the -cclock and -mclock didn't do anything for me, i have to say that i use the 16.x drivers ; i know you mention that 15.x works better with your miner, would it be a problem with my drivers?

keep up the good work, if you could fix these details and "upgrade" your miner to be more efficient with 16.x drivers. i would be happy.
I am waiting to receive 5 more RX 480, so more hash your way soon!

If you use Windows, overclocking must work, check the log for details.

i got the -tt to work, thanks

for the -cclock and -mclock ; i can't get it to work.
Windows 7, amd drivers 16.20, crossfire disabled ,

my command line :
NsGpuCNMiner.exe -o stratum+tcp://pool.minexmr.com:4444 -u <wallet> -p x -tt 1 -cclock 1380 -mclock 2075

from the log, i don't see anything about core clock and memory settings; can you tell me how to get this to work properly? thanks

20:16:08:191   11c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
20:16:08:197   11c8   º            Claymore CryptoNote GPU Miner  v9.6 Beta            º
20:16:08:200   11c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
20:16:08:592   11c8   
Cards available: 2
20:16:08:595   11c8   GPU #0: name: Ellesmere, 8192 MB available, 36 units
20:16:08:598   11c8   GPU #1: name: Ellesmere, 8192 MB available, 36 units
20:16:08:601   11c8   Total cards: 2
20:16:08:604   11c8   Initializing...

20:16:08:609   11c8   GPU #0 recognized as RX480
20:16:08:612   11c8   card 0, m1 8192, m2 4048 w 288
20:16:08:615   11c8   0 m = 2
20:16:08:618   11c8   GPU #0: HashCnt = 1024
20:16:08:622   11c8   GPU #1 recognized as RX480
20:16:08:626   11c8   card 1, m1 8192, m2 4048 w 288
20:16:08:629   11c8   1 m = 2
20:16:08:632   11c8   GPU #1: HashCnt = 1024
20:16:08:635   11c8   POOL version
20:16:08:639   11c8   b143
20:16:11:195   11c8   GPU #0: -a 1 mode selected
20:16:11:198   11c8   GPU #1: -a 1 mode selected
20:16:11:240   11c8   2 pools specified.
20:16:11:244   11c8   Remote monitoring is enabled on port 3333
20:16:11:248   11c8   Press "m" key for tune mode.
20:16:11:258   3e0   Stratum - connecting to 'pool.minexmr.com' <37.59.49.7> port 4444
20:16:11:343   1f80   Stratum - Connected
20:16:11:351   3e0   Stratum - Connected
20:16:11:436   1f80   got 303 bytes
20:16:11:439   1f80   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"114719713921658","job":{"blob":"0305ecb9b1bf0523981fd2cfdeb5857fdead4557799d5bb10443ff8ef24ff42965e941484267870 0000000375bb68e3d098b66d3e2237d58d761363cfc794c67eff02d71d885ba13941cf307","job_id":"867910130019299","target":"37894100"},"status":"OK"}}

20:16:11:442   1f80   parse packet: 303
20:16:11:446   1f80   new buf size: 0
20:16:11:450   1f80   DevFee: Pool Diff 1000
20:16:11:452   1990   Round
20:16:13:207   1bd4   GPU 0: HashCnt = 1024, time = 1708 ms, hashrate = 599 h/s
20:16:13:215   1784   GPU 1: HashCnt = 1024, time = 1716 ms, hashrate = 596 h/s
20:16:13:222   1bd4   round found 3 shares
20:16:13:228   1bd4   Round
20:16:13:232   3e0   09/28/16-20:16:13 - SHARE FOUND (target 1000) - (GPU 1 of 2)
20:16:13:236   3e0   09/28/16-20:16:13 - SHARE FOUND (target 1000) - (GPU 1 of 2)
20:16:13:240   3e0   09/28/16-20:16:13 - SHARE FOUND (target 1000) - (GPU 1 of 2)
20:16:13:243   3e0   09/28/16-20:16:13 - SHARE FOUND (target 1000) - (GPU 1 of 2)
20:16:13:368   3e0   got 63 bytes
20:16:13:371   3e0   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}

20:16:13:375   3e0   parse packet: 63
20:16:13:378   3e0   Share accepted
20:16:13:382   3e0   new buf size: 0
20:16:13:665   3e0   got 315 bytes
20:16:13:669   3e0   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
{"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
{"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
{"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
{"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}

20:16:13:673   3e0   parse packet: 63
20:16:13:676   3e0   Share accepted
20:16:13:679   3e0   remove first packet 252
20:16:13:683   3e0   new buf size: 252
20:16:13:687   3e0   parse packet: 63
20:16:13:690   3e0   Share accepted
20:16:13:694   3e0   remove first packet 189
20:16:13:698   3e0   new buf size: 189
20:16:13:702   3e0   parse packet: 63
20:16:13:706   3e0   Share accepted
20:16:13:708   3e0   remove first packet 126
20:16:13:711   3e0   new buf size: 126
20:16:13:715   3e0   parse packet: 63
20:16:13:718   3e0   Share accepted
20:16:13:722   3e0   remove first packet 63
20:16:13:727   3e0   new buf size: 63
20:16:13:731   3e0   parse packet: 63
20:16:13:735   3e0   Share accepted
20:16:13:738   3e0   new buf size: 0
20:16:14:011   3e0   got 63 bytes
20:16:14:015   3e0   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
20:16:14:019   3e0   parse packet: 63
20:16:14:022   3e0   Share accepted
20:16:14:026   3e0   new buf size: 0
20:16:14:863   1990   GPU 0: HashCnt = 1024, time = 1618 ms, hashrate = 632 h/s
20:16:14:876   1d44   GPU 1: HashCnt = 1024, time = 1621 ms, hashrate = 631 h/s
20:16:14:882   1990   Round
20:16:14:896   1d44   round found 1 shares
20:16:14:900   1d44   Round
20:16:15:023   3e0   got 63 bytes
20:16:15:027   3e0   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
20:16:15:031   3e0   parse packet: 63
20:16:15:035   3e0   Share accepted
20:16:15:039   3e0   new buf size: 0
20:16:16:520   1bd4   GPU 0: HashCnt = 1024, time = 1617 ms, hashrate = 633 h/s

[mrbubl3s]

Hashrates of mine, some overclocked:

Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s


If you want more details ask.
Soon I'll update with wattage info..

5850 gives me 230 with no OC. whats your settings? OC'd should put out 250 or even more,depending on how far u push it.
Efficiency is another thing tho..

I think there's something wrong with it, doesn't seem to improve much over 900/1000, runs super hot. 90-100c
According my my gauge it takes ~200w.

I'll probably put it in a family computer as it's not at all profitable.