Claymore's CryptoNote AMD GPU Miner v11.3

[GabryRox]

ZEC is only most profitable for older cards... I guess 390s, 290s, etc.  But for 470/480s, ETH & XMR have been more profitable than ZEC for quite a while now.  Simply plug your system stats into this site and you will see it.  ZEC has made a surge in profitability over the past few hours mainly due to lower difficulty but it is still clearly below the other 2, at least for the 470/480 crowd.

Absolutely right! But I like more http://whattomine.com

And in my pool https://minergate.com calculator  https://minergate.com/calculator , too right!

Yeah, I've checked that site as well but it does not seem to be as reliable as coinwarez. The 2 big issues I have seen is that I is usually WAY off on ETH difficulty (a spot check now of the 2 sites at the exact same time has CW with 92.6 and WTM at 85.4), which really skews profitability. Every time I've checked, CW has been right and WTM has been wrong, so there must be something wrong with how they are pulling ETH diff.  Also, the $ values that WTM uses also usually seem to be off by some degree. Based on these 2 factors, seems to me that CW is much more reliable.

[siagirl]

Hi I have AMD video cards on windows 64. Does anybody have worked settings for Claymore's CryptoNote GPU Miner v9.6 or another working miner for Monero. Thank you in advance.

[pehoko]

Why linux version loads 100% cpu?

[yuslav]

Yeah, I've checked that site as well but it does not seem to be as reliable as coinwarez. The 2 big issues I have seen is that I is usually WAY off on ETH difficulty (a spot check now of the 2 sites at the exact same time has CW with 92.6 and WTM at 85.4), which really skews profitability. Every time I've checked, CW has been right and WTM has been wrong, so there must be something wrong with how they are pulling ETH diff.  Also, the $ values that WTM uses also usually seem to be off by some degree. Based on these 2 factors, seems to me that CW is much more reliable.

maybe you're right.

Hi I have AMD video cards on windows 64. Does anybody have worked settings for Claymore's CryptoNote GPU Miner v9.6 or another working miner for Monero. Thank you in advance.

then sign up
https://minergate.com

and then download the finished bat file for Claymore's CryptoNote GPU Miner v9. 6 after registration. here it is very easy! https://minergate.com/altminers/claymore-gpu

[Hurtman]

When there is a new version?

[yuslav]

When there is a new version?

Waiting .. When coming from Thailand)))

[MCWey8]

When there is a new version?

Waiting .. When coming from Thailand)))

slow down turbo ... im sure its coming

give Claymore a little faith

[siagirl]

Yeah, I've checked that site as well but it does not seem to be as reliable as coinwarez. The 2 big issues I have seen is that I is usually WAY off on ETH difficulty (a spot check now of the 2 sites at the exact same time has CW with 92.6 and WTM at 85.4), which really skews profitability. Every time I've checked, CW has been right and WTM has been wrong, so there must be something wrong with how they are pulling ETH diff.  Also, the $ values that WTM uses also usually seem to be off by some degree. Based on these 2 factors, seems to me that CW is much more reliable.

maybe you're right.

Hi I have AMD video cards on windows 64. Does anybody have worked settings for Claymore's CryptoNote GPU Miner v9.6 or another working miner for Monero. Thank you in advance.

then sign up
https://minergate.com

and then download the finished bat file for Claymore's CryptoNote GPU Miner v9. 6 after registration. here it is very easy! https://minergate.com/altminers/claymore-gpu

Yes, thank you

[doktor83]

so why do you wait so much for the new version ? There wont be any speedup.

[Claymore]

v9.7:

- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.
- improved "-tt" and "-r" options.
- added "-fanmin", "-fanmax", "-tstop", "-powlim", "-cvddc", "-mvddc" options.
- added HTTP support for remote port.
- added "-retrydelay" option.
- added "-ftime" option.
- a lot of minor improvements.

PS. Too many changes, bugs are quite possible.

[gaah]

v9.7:

- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.
- improved "-tt" and "-r" options.
- added "-fanmin", "-fanmax", "-tstop", "-powlim", "-cvddc", "-mvddc" options.
- added HTTP support for remote port.
- added "-retrydelay" option.
- added "-ftime" option.
- a lot of minor improvements.

PS. Too many changes, bugs are quite possible.

Thanks Claymore great work!

[racminer]

Hi

I have 4 rigs that work perfectly with Zcash (Claymore miner 9.2 no crashes whatsoever until now)  

1)  7 x R7 370 ; windows 10 ; Crimson 15.12
2)  7 x R7 370 ; windows 10 ; Crimson 15.12
3)  2 x Rx480 + 4 R9 380 ; Crimson 16.9.2
4)  6 x Rx480 ;  Crimson 16.9.2

Monero is quite profitable at the moment, Rigs 1 and 2 worked perfectly with monero  miner 9.6.
However recurrent crashes occur with rigs 3 and 4. Sometimes after 15min, sometimes after a few hours.
I have no clue of whatever is wrong !

Maybe Crimson 16.9.2 is not what I need for monero miner??

Help.

We are waiting for new miners, but generally pass on 9. 5 and you will have happiness!

Rig 3 ans 4 seem stable now. I installed this driver non-whql-win10-64bit-radeon-software-crimson-16.11.4-nov15.
Getting around 700H/s for the Rx480 and 530 H/s for the R9 380 (no overclocking). Running fine for more than 6 hours now.
I'll watch and see  

********** Over 30 hours now ... works nicely...

[amber46]

WTF???

Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"

[ocminer]

v9.7:

- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.


PS. Too many changes, bugs are quite possible.

xmr.suprnova.cc supports encrypted connections as well...

[Claymore]

WTF???

Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"

What Windows version?

v9.7:

- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.


PS. Too many changes, bugs are quite possible.

xmr.suprnova.cc supports encrypted connections as well...

What port? ssl://xmr.suprnova.cc:5222 does not work.

[ocminer]

WTF???

Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"

What Windows version?

v9.7:

- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.


PS. Too many changes, bugs are quite possible.

xmr.suprnova.cc supports encrypted connections as well...

What port? ssl://xmr.suprnova.cc:5222 does not work.

Oh I'm sorry, I posted in on the mainpage but I've forgot to save, its:

ssl://xmr.suprnova.cc:5221

[adaseb]

Claymore,

Any chance you can add the "ttli" option?

[amber46]

WTF???

Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"

What Windows version?
Windows 10 64bit!

[gaah]

I get this on dwarfpool Internal Server Error

The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there is an error in the application.Im i the only one?

[Prelude]

I get this on dwarfpool Internal Server Error

The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there is an error in the application.Im i the only one?

Working fine over here, W10 64 bit.