Claymore's CryptoNote AMD GPU Miner v11.3

[almirfiorio]

My memory is samsung 8GB DDR3 1600

Core Clocl - 1216
GPU clock - 1750
Voltage are default

You need to be more specific here:
How did you modify your BIOS, what memory is on your GPU (Hynix/Elpida/Samsung)?
What are your other settings aside of mem clock (core clock, core voltage, mem voltage) ?
My rig is running at an average of 725 H/s/card (lowest card ~690H/s, fastest ~760H/s) so i can't help you much if your target is to increase the hashrate to 900 H/s :p

[Maddemon07]

 
I am currently running 2 x R9 Fury Trixx & on Claymore 

-a 2 mode (low power mode) @ default clocks / no mods each do about ~816 h/s

1632 h/s total, pulling 274 Watts @ the wall. (Mother board pulls ~42w, So each fury is pulling little less than 120watts @ the wall.)

I also run a Fury X on my gaming machine, even with the extra shaders doesn't seem to increase the hash rate.. (but more power consumption)

[almirfiorio]

how did you get this ? I can do more with 2 rx 470?

I am currently running 2 x R9 Fury Trixx & on Claymore 

-a 2 mode (low power mode) @ default clocks / no mods each do about ~816 h/s

1632 h/s total, pulling 274 Watts @ the wall. (Mother board pulls ~42w, So each fury is pulling little less than 120watts @ the wall.)

I also run a Fury X on my gaming machine, even with the extra shaders doesn't seem to increase the hash rate.. (but more power consumption)

[ol92]

[R9 FURY speeds]

about 400H/s from sinlge grphic card, is it normal? Quite insanse. Double lower than polaris.

Yeah I get less than 500 with my fury on claymore.  use another xmr miner, you'll get around 800.  But its mining Zec anyway.  I havent played with it for xmr, but i'm quite positive it can do more.  I wonder if w0lf has a fury.  There are private miners out there too.

I got 880h/s with a fury-x gpu@1125mhz with claymore 9.6. Try with -h 1024. Driver between 15.12 and 16.11

[rinus]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

[avirdoz]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

[rinus]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I have 6 cards sapphire rx480 8 giga. No minergate?

[Hurtman]

sgminer not a better , claymore still much better

[drr0ss]

Hey Claymore, do you plan to implement assembler features to the rest of your miners, and when []?

[newmz]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

[JuanHungLo]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct.  Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s.  Can't speak for 290.  But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner.  Sorry, Claymore, I've always used your miners but you've been passed up.

[citronick]

Hi Claymore...

A humble request.

Can you get the v9.7 ported to Linux?

Thanks

[batko]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct.  Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s.  Can't speak for 290.  But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner.  Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x
whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

[dnox]

Hello, im actually having some trouble using claymore.
I have a AMD Radeon 5800 and installed claymore to mine with my gpu.
Im also using minergate miner to CPU mine.
But claymore is being responsible for 4 invalid shares in less than 24hs and this gave me a negative balance.
At first i tought it could be the heat since claymore was showing 80C on my gpu.
I set -tt to 50 and -fanmax to 100 and this solved the temperature problem, its now running at 60C. But even after fixing the cooling i got another invalid share and had to turn off claymore because it was making me lose money.
Is it because my GPU is an old model? Is there anyway i can fix it?

Thnx a lot in advance.

[JuanHungLo]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct.  Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s.  Can't speak for 290.  But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner.  Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x
whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

It varies depending on card:  Gigabyte at 1100/1550 elpida does 578, 1100/1500 hynix does 565
Sapphire Hynix, and XFX elpida 1050/1500 does 563 with sgminer all stable, no HW errors less than .2% rejects.

[batko]

with sapphire 280x hynix AFR I have 640Hs 1100/1625 mod bios,
Sapphire 280x Elpida BBBg 605Hs same clock mod bios.

[carlo_0000]

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct.  Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s.  Can't speak for 290.  But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner.  Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x
whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

It varies depending on card:  Gigabyte at 1100/1550 elpida does 578, 1100/1500 hynix does 565
Sapphire Hynix, and XFX elpida 1050/1500 does 563 with sgminer all stable, no HW errors less than .2% rejects.

  heu strange
with my 380 2gigas version not x,  i do 600 with asus , xfx 619 and sapphire  622  with original bios and default clock (oc not stable and useless for little h/s)

[mrtrodonet]

I'm seeing a very weird behavior with my MSI 8gb rx480s.
I started a miner and got stable 750h/s at 1350/2250
After reboot i started the miner again and it gives me 480 h/s now.
Restarted miner and get 300h/s
Restarted a few more times and back to 480h/s

I'm using MSI afterburber on win10.
I killed wattman process.
Card is using 100% power and seems to be running at set clock speeds.

Config:
-a 4
-h 1024
set virtual memory to 16gb-20gb
before running the miner i run: setx GPU_MAX_ALLOC_PERCENT 100

Any ideas?

[carlo_0000]

i have that too with my 5x 470's    they run average 760hs  but 1 or 2 of them run in the 400-500's

i have to restart the miner a lot of time and change a bit clock setting  till they all hit 750+ than i reset my clock to 1920

[sorry2xs]

is the a way to change the color for devfee mining