|
d3m0n1q_733rz
|
 |
February 06, 2012, 01:22:28 PM |
|
Last phatk2 kernel update for those with GCN (HD79xx) cards. This is a mod that I've tossed together that allows the use of 8 out of the 16 available vectors in these cards' SIMD. I don't know how well it'll work for you, but I need someone with a 79xx series card to test it out for me. I'll port it over to Phoenix 2 later, but this is what I have now. Play around with the settings if you would to "dial in" the right combination. If anyone wants to donate bitcoin toward a GCN card so I can test the kernel mods myself as I go, I would appreciate it. I'm trying to expand the miners to the full capabilities of the cards. So, this means that I might be attempting a new kernel as well though I can't promise anything that big. But I have some ideas on what I want to achieve and how. // This file is taken and modified from the public-domain poclbm project, and
// I have therefore decided to keep it public-domain.
#ifdef VECTORS8
typedef uint8 u;
#elif defined VECTORS4
typedef uint4 u;
#elif defined VECTORS
typedef uint2 u;
#else
typedef uint u;
#endif
__constant uint K[64] = {
0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
};
__constant uint ConstW[128] = {
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x80000000U, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000280U,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x80000000U, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000100U,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
};
__constant uint H[8] = {
0x6a09e667, 0xbb67ae85, 0x3c6ef372, 0xa54ff53a, 0x510e527f, 0x9b05688c, 0x1f83d9ab, 0x5be0cd19
};
#ifdef BITALIGN
#pragma OPENCL EXTENSION cl_amd_media_ops : enable
#define rot(x, y) amd_bitalign(x, x, (uint)(32 - y))
#else
#define rot(x, y) rotate(x, (uint)y)
#endif
// This part is not from the stock poclbm kernel. It's part of an optimization
// added in the Phoenix Miner.
// Some AMD devices have the BFI_INT opcode, which behaves exactly like the
// SHA-256 Ch function, but provides it in exactly one instruction. If
// detected, use it for Ch. Otherwise, construct Ch out of simpler logical
// primitives.
#ifdef BFI_INT
// Well, slight problem... It turns out BFI_INT isn't actually exposed to
// OpenCL (or CAL IL for that matter) in any way. However, there is
// a similar instruction, BYTE_ALIGN_INT, which is exposed to OpenCL via
// amd_bytealign, takes the same inputs, and provides the same output.
// We can use that as a placeholder for BFI_INT and have the application
// patch it after compilation.
// This is the BFI_INT function
#define Ch(x, y, z) amd_bytealign(x,y,z)
// Ma can also be implemented in terms of BFI_INT...
#define Ma(z, x, y) amd_bytealign(z^x,y,x)
#else
#define Ch(x, y, z) bitselect(z,y,x)
#define Ma(x, y, z) bitselect(x,y,(z^x))
#endif
//Various intermediate calculations for each SHA round
#define s0(n) (S0(Vals[(0 + 128 - (n)) % 8]))
#define S0(n) (rot(n, 30u)^rot(n, 19u)^rot(n,10u))
#define s1(n) (S1(Vals[(4 + 128 - (n)) % 8]))
#define S1(n) (rot(n, 26u)^rot(n, 21u)^rot(n, 7u))
#define ch(n) Ch(Vals[(4 + 128 - (n)) % 8],Vals[(5 + 128 - (n)) % 8],Vals[(6 + 128 - (n)) % 8])
#define maj(n) Ma(Vals[(1 + 128 - (n)) % 8],Vals[(2 + 128 - (n)) % 8],Vals[(0 + 128 - (n)) % 8])
//t1 calc when W is already calculated
#define t1(n) K[(n) % 64] + Vals[(7 + 128 - (n)) % 8] + W[(n)] + s1(n) + ch(n)
//t1 calc which calculates W
#define t1W(n) K[(n) % 64] + Vals[(7 + 128 - (n)) % 8] + W(n) + s1(n) + ch(n)
//Used for constant W Values (the compiler optimizes out zeros)
#define t1C(n) (K[(n) % 64]+ ConstW[(n)]) + Vals[(7 + 128 - (n)) % 8] + s1(n) + ch(n)
//t2 Calc
#define t2(n) maj(n) + s0(n)
#define rotC(x,n) (x<<n | x >> (32-n))
//W calculation used for SHA round
#define W(n) (W[n] = P4(n) + P3(n) + P2(n) + P1(n))
//Partial W calculations (used for the begining where only some values are nonzero)
#define P1(n) ((rot(W[(n)-2],15u)^rot(W[(n)-2],13u)^((W[(n)-2])>>10U)))
#define P2(n) ((rot(W[(n)-15],25u)^rot(W[(n)-15],14u)^((W[(n)-15])>>3U)))
#define p1(x) ((rot(x,15u)^rot(x,13u)^((x)>>10U)))
#define p2(x) ((rot(x,25u)^rot(x,14u)^((x)>>3U)))
#define P3(n) W[n-7]
#define P4(n) W[n-16]
//Partial Calcs for constant W values
#define P1C(n) ((rotC(ConstW[(n)-2],15)^rotC(ConstW[(n)-2],13)^((ConstW[(n)-2])>>10U)))
#define P2C(n) ((rotC(ConstW[(n)-15],25)^rotC(ConstW[(n)-15],14)^((ConstW[(n)-15])>>3U)))
#define P3C(x) ConstW[x-7]
#define P4C(x) ConstW[x-16]
//SHA round with built in W calc
#define sharoundW(n) Barrier1(n); Vals[(3 + 128 - (n)) % 8] += t1W(n); Vals[(7 + 128 - (n)) % 8] = t1W(n) + t2(n);
//SHA round without W calc
#define sharound(n) Barrier2(n); Vals[(3 + 128 - (n)) % 8] += t1(n); Vals[(7 + 128 - (n)) % 8] = t1(n) + t2(n);
//SHA round for constant W values
#define sharoundC(n) Barrier2(n); Vals[(3 + 128 - (n)) % 8] += t1C(n); Vals[(7 + 128 - (n)) % 8] = t1C(n) + t2(n);
//The compiler is stupid... I put this in there only to stop the compiler from (de)optimizing the order
#define Barrier1(n) t1 = t1C((n+1))
#define Barrier2(n) t1 = t1C((n))
//#define Barrier3(n) Barrier2(n)
__kernel
//removed this to allow detection of invalid work size
//__attribute__((reqd_work_group_size(WORKSIZE, 1, 1)))
void search( const uint state0, const uint state1, const uint state2, const uint state3,
const uint state4, const uint state5, const uint state6, const uint state7,
const uint B1, const uint C1, const uint D1,
const uint F1, const uint G1, const uint H1,
const u base,
const uint W16, const uint W17,
const uint PreVal4, const uint PreVal0,
const uint PreW31, const uint PreW32,
const uint PreW19, const uint PreW20,
__global uint * output)
{
u W[124];
u Vals[8];
//Dummy Variable to prevent compiler from reordering between rounds
u t1;
//Vals[0]=state0;
Vals[1]=B1;
Vals[2]=C1;
Vals[3]=D1;
//Vals[4]=PreVal4;
Vals[5]=F1;
Vals[6]=G1;
Vals[7]=H1;
W[16] = W16;
W[17] = W17;
#ifdef VECTORS8
// #ifdef GOFFSET
// W[3] = ((uint)get_global_id(0) << 3) + (u)(0, 1, 2, 3, 4, 5, 6, 7);
// uint r = rot(W[3].s0,25u)^rot(W[3].s0,14u)^((W[3].s0)>>3U);
// #else
W[3] = base + (uint)(get_local_id(0)) * 8u + (uint)(get_group_id(0)) * (WORKSIZE * 8u);
uint r = rot(W[3].s0,25u)^rot(W[3].s0,14u)^((W[3].s0)>>3U);
//Since only the 2 LSB is opposite between the nonces, we can save an instruction by flipping the 4 bits in W18 rather than the 1 bit in W3
W[18] = PreW20 + (u){r, r ^ 0x2004000U, r ^ 0x4008000U, r ^ 0x600C000U, r ^ 0x8010000U, r ^ 0xA050000U, r ^ 0xC090000U, r ^ 0xE0D0000U};
#elif defined VECTORS4
//Less dependencies to get both the local id and group id and then add them
W[3] = base + (uint)(get_local_id(0)) * 4u + (uint)(get_group_id(0)) * (WORKSIZE * 4u);
uint r = rot(W[3].s0,25u)^rot(W[3].s0,14u)^((W[3].s0)>>3U);
//Since only the 2 LSB is opposite between the nonces, we can save an instruction by flipping the 4 bits in W18 rather than the 1 bit in W3
W[18] = PreW20 + (u){r, r ^ 0x2004000U, r ^ 0x4008000U, r ^ 0x600C000U};
#elif defined VECTORS
W[3] = base + (uint)(get_local_id(0)) * 2u + (uint)(get_group_id(0)) * (WORKSIZE * 2u);
uint r = rot(W[3].s0,25u)^rot(W[3].s0,14u)^((W[3].s0)>>3U);
W[18] = PreW20 + (u){r, r ^ 0x2004000U};
#else
W[3] = base + get_local_id(0) + get_group_id(0) * (WORKSIZE);
u r = rot(W[3],25u)^rot(W[3],14u)^((W[3])>>3U);
W[18] = PreW20 + r;
#endif
//the order of the W calcs and Rounds is like this because the compiler needs help finding how to order the instructions
Vals[4] = PreVal4 + W[3];
Vals[0] = PreVal0 + W[3];
sharoundC(4);
W[19] = PreW19 + W[3];
sharoundC(5);
W[20] = P4C(20) + P1(20);
sharoundC(6);
W[21] = P1(21);
sharoundC(7);
W[22] = P3C(22) + P1(22);
sharoundC(8);
W[23] = W[16] + P1(23);
sharoundC(9);
W[24] = W[17] + P1(24);
sharoundC(10);
W[25] = P1(25) + P3(25);
W[26] = P1(26) + P3(26);
sharoundC(11);
W[27] = P1(27) + P3(27);
W[28] = P1(28) + P3(28);
sharoundC(12);
W[29] = P1(29) + P3(29);
sharoundC(13);
W[30] = P1(30) + P2C(30) + P3(30);
W[31] = PreW31 + (P1(31) + P3(31));
sharoundC(14);
W[32] = PreW32 + (P1(32) + P3(32));
sharoundC(15);
sharound(16);
sharound(17);
sharound(18);
sharound(19);
sharound(20);
sharound(21);
sharound(22);
sharound(23);
sharound(24);
sharound(25);
sharound(26);
sharound(27);
sharound(28);
sharound(29);
sharound(30);
sharound(31);
sharound(32);
sharoundW(33);
sharoundW(34);
sharoundW(35);
sharoundW(36);
sharoundW(37);
sharoundW(38);
sharoundW(39);
sharoundW(40);
sharoundW(41);
sharoundW(42);
sharoundW(43);
sharoundW(44);
sharoundW(45);
sharoundW(46);
sharoundW(47);
sharoundW(48);
sharoundW(49);
sharoundW(50);
sharoundW(51);
sharoundW(52);
sharoundW(53);
sharoundW(54);
sharoundW(55);
sharoundW(56);
sharoundW(57);
sharoundW(58);
sharoundW(59);
sharoundW(60);
sharoundW(61);
sharoundW(62);
sharoundW(63);
W[64]=state0+Vals[0];
W[65]=state1+Vals[1];
W[66]=state2+Vals[2];
W[67]=state3+Vals[3];
W[68]=state4+Vals[4];
W[69]=state5+Vals[5];
W[70]=state6+Vals[6];
W[71]=state7+Vals[7];
//const u Temp = (0xb0edbdd0U + K[0]) + W[64];
Vals[0]=H[0];
Vals[1]=H[1];
Vals[2]=H[2];
Vals[3] = 0xa54ff53aU + (0xb0edbdd0U + K[0]) + W[64];
//Vals[3]=H[3];
Vals[4]=H[4];
Vals[5]=H[5];
Vals[6]=H[6];
Vals[7] = 0x08909ae5U + (0xb0edbdd0U + K[0]) + W[64];
//Vals[7]=H[7];
#define P124(n) P2(n) + P1(n) + P4(n)
W[64 + 16] = + P2(64 + 16) + P4(64 + 16);
sharound(64 + 1);
W[64 + 17] = P1C(64 + 17) + P2(64 + 17) + P4(64 + 17);
sharound(64 + 2);
W[64 + 18] = P124(64 + 18);
sharound(64 + 3);
W[64 + 19] = P124(64 + 19);
sharound(64 + 4);
W[64 + 20] = P124(64 + 20);
sharound(64 + 5);
W[64 + 21] = P124(64 + 21);
sharound(64 + 6);
W[64 + 22] = P4(64 + 22) + P3C(64 + 22) + P2(64 + 22) + P1(64 + 22);
sharound(64 + 7);
W[64 + 23] = P4(64 + 23) + P3(64 + 23) + P2C(64 + 23) + P1(64 + 23);
sharoundC(64 + 8);
W[64 + 24] = P1(64 + 24) + P4C(64 + 24) + P3(64 + 24);
sharoundC(64 + 9);
W[64 + 25] = P3(64 + 25) + P1(64 + 25);
sharoundC(64 + 10);
W[64 + 26] = P3(64 + 26) + P1(64 + 26);
sharoundC(64 + 11);
W[64 + 27] = P3(64 + 27) + P1(64 + 27);
sharoundC(64 + 12);
W[64 + 28] = P3(64 + 28) + P1(64 + 28);
sharoundC(64 + 13);
W[64 + 29] = P1(64 + 29) + P3(64 + 29);
W[64 + 30] = P3(64 + 30) + P2C(64 + 30) + P1(64 + 30);
sharoundC(64 + 14);
W[64 + 31] = P4C(64 + 31) + P3(64 + 31) + P2(64 + 31) + P1(64 + 31);
sharoundC(64 + 15);
sharound(64 + 16);
sharound(64 + 17);
sharound(64 + 18);
sharound(64 + 19);
sharound(64 + 20);
sharound(64 + 21);
sharound(64 + 22);
sharound(64 + 23);
sharound(64 + 24);
sharound(64 + 25);
sharound(64 + 26);
sharound(64 + 27);
sharound(64 + 28);
sharound(64 + 29);
sharound(64 + 30);
sharound(64 + 31);
sharoundW(64 + 32);
sharoundW(64 + 33);
sharoundW(64 + 34);
sharoundW(64 + 35);
sharoundW(64 + 36);
sharoundW(64 + 37);
sharoundW(64 + 38);
sharoundW(64 + 39);
sharoundW(64 + 40);
sharoundW(64 + 41);
sharoundW(64 + 42);
sharoundW(64 + 43);
sharoundW(64 + 44);
sharoundW(64 + 45);
sharoundW(64 + 46);
sharoundW(64 + 47);
sharoundW(64 + 48);
sharoundW(64 + 49);
sharoundW(64 + 50);
sharoundW(64 + 51);
sharoundW(64 + 52);
sharoundW(64 + 53);
sharoundW(64 + 54);
sharoundW(64 + 55);
sharoundW(64 + 56);
sharoundW(64 + 57);
sharoundW(64 + 58);
u g = -(K[60] + H[7]) - S1((Vals[0] + Vals[4]) + (K[59] + W(59+64)) + s1(64+59)+ ch(59+64));
u v = W[117] + W[108] + Vals[3] + Vals[7] + P2(124) + P1(124) + Ch((Vals[0] + Vals[4]) + (K[59] + W(59+64)) + s1(64+59)+ ch(59+64),Vals[1],Vals[2]);
uint nonce = 0;
#ifdef VECTORS8
if (v.s0 == g.s0)
{
nonce = W[3].s0;
}
if (v.s1 == g.s1)
{
nonce = W[3].s1;
}
if (v.s2 == g.s2)
{
nonce = W[3].s2;
}
if (v.s3 == g.s3)
{
nonce = W[3].s3;
}
if (v.s4 == g.s4)
{
nonce = W[3].s4;
}
if (v.s5 == g.s5)
{
nonce = W[3].s5;
}
if (v.s6 == g.s6)
{
nonce = W[3].s6;
}
if (v.s7 == g.s7)
{
nonce = W[3].s7;
}
#elif defined VECTORS4
if (v.s0 == g.s0)
{
nonce = W[3].s0;
}
if (v.s1 == g.s1)
{
nonce = W[3].s1;
}
if (v.s2 == g.s2)
{
nonce = W[3].s2;
}
if (v.s3 == g.s3)
{
nonce = W[3].s3;
}
#elif defined VECTORS
if (v.s0 == g.s0)
{
nonce = W[3].s0;
}
if (v.s1 == g.s1)
{
nonce = W[3].s1;
}
#else
if (v == g)
{
nonce = W[3];
}
#endif
if(nonce)
{
//Faster to shift the nonce by 2 due to 4-DWORD addressing and does not add more collisions
output[OUTPUT_SIZE] = nonce;
output[get_local_id(0)] = nonce;
}
}
Credit goes to Diapolo for all of their help on the kernel. Some of their ideas and coding style are placed into this. GOFFSET is a work in progress here, but totally their idea. Also, as this has created a new page, Phoenix 2 beta has been released:https://bitcointalk.org/index.php?topic=62765.0 |
