Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come

[Supercomputing]

Did the developer ever make the source code public for this?

not yet

@supercomputing: are you still finding blocks under linux? still none here after ~8h...

Yes, I found 12 blocks in approximately 8 hours. What NVCC options did you use?

CUDA Toolkit: cuda_6.5.14_linux_64.run
CUDA Linux Driver: NVIDIA-Linux-x86_64-340.46.run
NVCC Options: -gencode=arch=compute_50,code=\"sm_50,compute_50\"

./skminer 10.0.0.2 9325
        ***** skMiner for nVidia GPUs by djm34  *****
                     This is version v0.1
        based on ccMiner by Christian Buchner and Christian H. 2014 ***
                   and on primeminer by Videlicet
         Copyright 2014 djm34
          BTC donation address: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

GPU 1 = GeForce GTX 750 Ti

Initializing Miner 10.0.0.2:9325 Threads = 1 Timeout = 30
Connected to 10.0.0.2:9325...
[MASTER] Coinshield Network: New Block 27397
15.4 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27397 | Diff = 36 0-bits | 00:00:12
17.1 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27397 | Diff = 36 0-bits | 00:00:23
17.8 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27397 | Diff = 36 0-bits | 00:00:34
[MASTER] Coinshield Network: New Block 27398
18.1 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:00:45
18.3 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:00:56
18.4 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:01:07
18.5 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:01:18
18.6 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:01:29
18.4 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:01:41
18.5 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:01:52
18.6 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:02:03
18.6 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27398 | Diff = 36 0-bits | 00:02:14
[MASTER] Coinshield Network: New Block 27399
18.6 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27399 | Diff = 36 0-bits | 00:02:25
18.7 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27399 | Diff = 36 0-bits | 00:02:36
18.6 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27399 | Diff = 36 0-bits | 00:02:47

                GeForce GTX 750 Ti (1)

******* BLOCK with 36 Leading Zero Bits FOUND *******

                Preparing for Block Submission...

Submitting Block...
[MASTER] Block Accepted By Coinshield Network.
[MASTER] Coinshield Network: New Block 27400
18.5 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27400 | Diff = 36 0-bits | 00:02:59
18.5 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27400 | Diff = 36 0-bits | 00:03:10

[skunk]

Did the developer ever make the source code public for this?

not yet

@supercomputing: are you still finding blocks under linux? still none here after ~8h...

Yes, I found 12 blocks in approximately 8 hours. What NVCC options did you use?

CUDA Toolkit: cuda_6.5.14_linux_64.run
CUDA Linux Driver: NVIDIA-Linux-x86_64-340.46.run
NVCC Options: -gencode=arch=compute_50,code=\"sm_50,compute_50\"

Cuda compilation tools, release 6.5, V6.5.12
Driver Version: 343.22
-gencode=arch=compute_30,code=\"sm_30,compute_30\"

[antonio8]

Ah man, not my day today.

Is the skminer just a simple bat as:  skminer.exe -d 0 -o Solo:PORT -u USERNAME -p PASSWORD

I run the bat and nothing. tried to do a --help but no luck also.

[bigreddmachine]

Ah man, not my day today.

Is the skminer just a simple bat as:  skminer.exe -d 0 -o Solo:PORT -u USERNAME -p PASSWORD

I run the bat and nothing. tried to do a --help but no luck also.

For CUDA gpu miner?

Code:

skminer.exe 127.0.0.1 9325 N

Where "N" is the number of GPUs.

[antonio8]

Ah man, not my day today.

Is the skminer just a simple bat as:  skminer.exe -d 0 -o Solo:PORT -u USERNAME -p PASSWORD

I run the bat and nothing. tried to do a --help but no luck also.

For CUDA gpu miner?

Code:

skminer.exe 127.0.0.1 9325 N

Where "N" is the number of GPUs.

Sorry, yes for Nvidia.

So would it be N 1 -d 0 If I only want to use the first gpu?

I get it now where it says Initializing miner  Threads = 4 Timeout = 10 but then nothing

[Supercomputing]

Cuda compilation tools, release 6.5, V6.5.12
Driver Version: 343.22
-gencode=arch=compute_30,code=\"sm_30,compute_30\"

OK, I am going to download and test with driver version 343.22

[djm34]

Cuda compilation tools, release 6.5, V6.5.12
Driver Version: 343.22
-gencode=arch=compute_30,code=\"sm_30,compute_30\"

OK, I am going to download and test with driver version 343.22

also you need to use compute_50 for a 750ti

[Supercomputing]

Cuda compilation tools, release 6.5, V6.5.12
Driver Version: 343.22
-gencode=arch=compute_30,code=\"sm_30,compute_30\"

OK, I am going to download and test with driver version 343.22

Tested with various display driver versions on Linux:
2 x GTX 780 Ti

[MASTER] Coinshield Network: New Block 27515
80.9 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27515 | Diff = 35 0-bits | 00:04:27
80.9 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27515 | Diff = 35 0-bits | 00:04:38

                GeForce GTX 780 Ti (2)

******* BLOCK with 35 Leading Zero Bits FOUND *******

                Preparing for Block Submission...

Submitting Block...
[MASTER] Block Accepted By Coinshield Network.
[MASTER] Coinshield Network: New Block 27516
80.2 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27516 | Diff = 35 0-bits | 00:04:50
80.3 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27516 | Diff = 35 0-bits | 00:05:01

                GeForce GTX 780 Ti (2)

******* BLOCK with 35 Leading Zero Bits FOUND *******

                Preparing for Block Submission...

Submitting Block...
[MASTER] Block Accepted By Coinshield Network.
[MASTER] Coinshield Network: New Block 27517
80.1 MH/s | 2 Blks ACC=2 REJ=0 | Height = 27517 | Diff = 36 0-bits | 00:05:12

[blaaaaacksuit]

It's funny, looks like BTC crashing solved the problem that this coin was aiming to do all along 

[skunk]

Cuda compilation tools, release 6.5, V6.5.12
Driver Version: 343.22
-gencode=arch=compute_30,code=\"sm_30,compute_30\"

OK, I am going to download and test with driver version 343.22

Tested with various display driver versions on Linux:
2 x GTX 780 Ti

[MASTER] Coinshield Network: New Block 27515
80.9 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27515 | Diff = 35 0-bits | 00:04:27
80.9 MH/s | 0 Blks ACC=0 REJ=0 | Height = 27515 | Diff = 35 0-bits | 00:04:38

                GeForce GTX 780 Ti (2)

******* BLOCK with 35 Leading Zero Bits FOUND *******

                Preparing for Block Submission...

Submitting Block...
[MASTER] Block Accepted By Coinshield Network.
[MASTER] Coinshield Network: New Block 27516
80.2 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27516 | Diff = 35 0-bits | 00:04:50
80.3 MH/s | 1 Blks ACC=1 REJ=0 | Height = 27516 | Diff = 35 0-bits | 00:05:01

                GeForce GTX 780 Ti (2)

******* BLOCK with 35 Leading Zero Bits FOUND *******

                Preparing for Block Submission...

Submitting Block...
[MASTER] Block Accepted By Coinshield Network.
[MASTER] Coinshield Network: New Block 27517
80.1 MH/s | 2 Blks ACC=2 REJ=0 | Height = 27517 | Diff = 36 0-bits | 00:05:12

still nothing here...
i'm running coinshield_prime, skminer and  coinshield-qt on the same box and both miners connect to wallet's port 9325, that's all right, isn't it?
i'm doubting because since skminer was started neither coinshield_prime did find any block... coincidence? bad luck?

edit: any debug flag i can add?

edit2: i guess i'm on the right chain: [METERS] 0 Block(s) ACC=0 REJ=0| Height = 27691 | Diff = 6.073475 | 00:45:51

[Supercomputing]

still nothing here...
i'm running coinshield_prime, skminer and  coinshield-qt on the same box and both miners connect to wallet's port 9325, that's all right, isn't it?
i'm doubting because since skminer was started neither coinshield_prime did find any block... coincidence? bad luck?

edit: any debug flag i can add?

edit2: i guess i'm on the right chain: [METERS] 0 Block(s) ACC=0 REJ=0| Height = 27691 | Diff = 6.073475 | 00:45:51

Try running on testnet to verify that the software is working properly.

[skunk]

still nothing here...
i'm running coinshield_prime, skminer and  coinshield-qt on the same box and both miners connect to wallet's port 9325, that's all right, isn't it?
i'm doubting because since skminer was started neither coinshield_prime did find any block... coincidence? bad luck?

edit: any debug flag i can add?

edit2: i guess i'm on the right chain: [METERS] 0 Block(s) ACC=0 REJ=0| Height = 27691 | Diff = 6.073475 | 00:45:51

Try running on testnet to verify that the software is working properly.

no blocks where found after running for half hour skminer alone on testnet... is there anything i can do to find out what's wrong with it?
i've also rebooted the box just in case of a driver crash, but didn't make any difference.

[antonio8]

Anyone running Nvidia cards that might be able to help with parameters to run.

I can't get this thing going for nothing.

skminer.exe -o SOLO IP:PORT -u USER -p PASSWORD -d 0

I tried the "N" but nothing. Don't know if I need the "-a".

[enerbyte]

Anyone running Nvidia cards that might be able to help with parameters to run.

I can't get this thing going for nothing.

skminer.exe -o SOLO IP:PORT -u USER -p PASSWORD -d 0

I tried the "N" but nothing. Don't know if I need the "-a".

Code:

skminer.exe 127.0.0.1 9325 3

skminer.exe IP PORT THREADS

this should work, although there are some cards that have problems with the miner.

[antonio8]

Anyone running Nvidia cards that might be able to help with parameters to run.

I can't get this thing going for nothing.

skminer.exe -o SOLO IP:PORT -u USER -p PASSWORD -d 0

I tried the "N" but nothing. Don't know if I need the "-a".

Code:

skminer.exe 127.0.0.1 9325 3

skminer.exe IP PORT THREADS

this should work, although there are some cards that have problems with the miner.

Thanks so much. I get it now. Was so used to having the -o -u -p in the bat.

I must have those cards. i get connected to, my ip and port but then get Failed to Update Height. So maybe this is a no go for me.

@ bigreddmachine

Sorry I wasn't understanding it earlier. I had to get the other way of doing bats out of my head.

Been a rough day, today.

[djm34]

Anyone running Nvidia cards that might be able to help with parameters to run.

I can't get this thing going for nothing.

skminer.exe -o SOLO IP:PORT -u USER -p PASSWORD -d 0

I tried the "N" but nothing. Don't know if I need the "-a".

Code:

skminer.exe 127.0.0.1 9325 3

skminer.exe IP PORT THREADS

this should work, although there are some cards that have problems with the miner.

what is "threads" ? if it is the number of card, then you should use the number should corespond to the number of card on your system.
If this concerns gpu threads? well a much larger number is required...

[antonio8]

I wonder if my problem is because I have the wallet on another computer than the cards mining?

[Supercomputing]

still nothing here...
i'm running coinshield_prime, skminer and  coinshield-qt on the same box and both miners connect to wallet's port 9325, that's all right, isn't it?
i'm doubting because since skminer was started neither coinshield_prime did find any block... coincidence? bad luck?

edit: any debug flag i can add?

edit2: i guess i'm on the right chain: [METERS] 0 Block(s) ACC=0 REJ=0| Height = 27691 | Diff = 6.073475 | 00:45:51

Try running on testnet to verify that the software is working properly.

no blocks where found after running for half hour skminer alone on testnet... is there anything i can do to find out what's wrong with it?
i've also rebooted the box just in case of a driver crash, but didn't make any difference.

I have tested the code with the following GPUs:

Works:
GTX 980 (4 GB sm_52)
GTX 780 Ti (3 GB sm_35)
GTX 750 Ti (2 GB sm_50)

Does not work:
GTX 680 (2 GB sm_30)

[Poena]

Are the binaries supposed to work out of the box for 750ti?

Or only under linux using compute 5.0.

Thanks.

[Superxfast]

I would like to sell 10000 CSD for 1 BTC. PM me if you are interesting.