[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

https://www.dropbox.com/s/397zu7whoj1s93u/Captura%20de%20pantalla%202019-04-20%20a%20las%2015.46.06.png?dl=0

This is happening to me in several currencies, both with supplier data and with personalized data, that remain at 0 of profit. I have tried many times already, and it is not just one currency they are several. You will see that all the data is added, it is impossible that with all the data the profit is 0 and I have measured the AL-GO to have reference

We also use the getnetworkhashps command a lot to get nethash but it depends on which currency, it gives us errors, the data is good on the form, but then the coin drops a lot, if I put it with the exponential formula which does not require this data , go back up But something is failing, as Moppidoo commented, he uses getinfo that we are not used to. I hope you have an easy solution because it is a small stone in the road.

Do you get the same issue even if you uncheck "Change properties" for this coin, to only use default values?

Can you please check that you don't have any pool for this coin where you have set the Profit Factor to 0 for the pool. As you remember, this will affect the revenue of the coin if you have enabled "Apply pool profit factor in the Coins tab" in the Options dialog, Statistics Settings.

[patrike]

Hello, Patricke.

I noticed that when creating an API request for determining complexity, etc., the response does not recognize the name of the site of three words.

For example, https://explorer.ravencoin.world/api/getdifficulty.

try     https://ravencoin.network/api/status?q=getDifficulty       Json    proof-of-work

Thank you friend.

But sites where in the title are three words
I have more.

When I open https://explorer.ravencoin.world/api/getdifficulty in a web browser I do see the Cloud Flare protection page the first time I launch it. It basically indicates that they only allows web browser that can solve a Javascript challenge are allowed to move on to the actual page. Cloud Flare protected sites cannot be accessed as an API from applications like Awesome Miner that only load data without being a complete web browser.

There might be some solution to this, but not an easy one that I get in place right away.

[patrike]

@patrike please implement memory voltage in awesome miner overclocking.
On AMD cards the core voltage is a combination of cvddc + mvddc, if you do not set both at the same value core clock voltage is not applied correctly

Images are on imgur

https://imgur.com/a/vFggb6l

Thanks for the suggestion. There will be some additional properties added to the native overclocking feature over the next few weeks so I will try to include this one as well.

[BestBitcoinOdds]

Can anyone help me out?
Some of my miners have restricted api access and others have privileged. I've followed these instructions "Awesome Miner will automatically configure the Managed Miners to use Privileged mode by default. These settings can be changed from the Advanced section of the miner properties in the Awesome Miner Options dialog." But I can't see where to change it?

[House Xylander]

What would be the best way to adjust the Algorithms section for equihash and Decred when you add DR5s & Z11s.

I already have it set for myDR3s & z9 minis.

Can you please describe this request/question in a bit more detail? I understand that you are about to add your new Antminers, but what are the configuration or operation you want to do here?

the current custom setting in the algorithm section for my Z9 minis is 10k/s @ 268w. When I added my Z11s they were showing 135k/s @ 4000w on the Main->Miners tab.

Thanks for the update. These two miners have quite a different efficiency you noticed. For this reason, the linear power usage scaling in the Profit Profile will not make good predictions.

Please go to the Options dialog, Profit Profile section and add a new profile for the Z11 miners. In this profile, you can enter a typical hashrate and power usage for the Z11, in the same way, to did in your previous profile for the Z9 miner. Finally, you can open the Properties of your External Miners representing the Z11 miners and select the new profit profile you created.

Thank you very much for the detailed explanation.

[Siolim]

Hello, Patricke.

I noticed that when creating an API request for determining complexity, etc., the response does not recognize the name of the site of three words.

For example, https://explorer.ravencoin.world/api/getdifficulty.

try     https://ravencoin.network/api/status?q=getDifficulty       Json    proof-of-work

Thank you friend.

But sites where in the title are three words
I have more.

When I open https://explorer.ravencoin.world/api/getdifficulty in a web browser I do see the Cloud Flare protection page the first time I launch it. It basically indicates that they only allows web browser that can solve a Javascript challenge are allowed to move on to the actual page. Cloud Flare protected sites cannot be accessed as an API from applications like Awesome Miner that only load data without being a complete web browser.

There might be some solution to this, but not an easy one that I get in place right away.

I thought the problem is json. Thank you, now everything is clear.

[trucobit]

@PArike I send you a small problem or discrepancy, it's very strange.

Currency PHL using your exponential formula gives a more or less close value, but it is dominated by auto exchanges and it does not work for me, but good. But when I choose the complete formula, I mean nethash, blocktime, reward ...... The result changes an awful lot to worse. I have checked the data several times, can not give a result that is 1/3 of the result with the exponential formula. To see if something is wrong, I think the blocking time may be wrong in the formula, or it is simply something else. I leave you the full currency data so you can configure it.

PHL  X16r  block reward 2.5    Blocktime  150 seconds

Difficulty
http://explore.placeh.io:8080/ext/summary     token json  data.[0].difficulty

Price

https://api.crex24.com/v2/public/tickers?instrument=PHL-BTC      token json  [?(@.instrument=='PHL-BTC')].bid

Nethash 

http://explore.placeh.io:8080/api/getnetworkhashps


With the exponential formula in the same machine 0.0014 6x 1080ti, with the complete formula 0.0058 the difference is huge, I do not understand it, it should not be like that, something fails.

I have done the measurement with exponential and the correct profit would be 1.25 but only when the auto exchanges (zpool, zergpool etc ...) do not give war.

It's not a coin I'm going to use, but this huge difference has caught my attention that something is not right. The formula with all the data can not be so far away. Somehow I do not trust the blocktime that is 150 seconds 2.5 minutes, but it is not a non-metric value.

I await your conclusions.

First a general answer. The formula for calculating coins per day using Difficulty-Reward-ExpFactor works for almost all coins and the formula using NetHash works for many coins as well. There will however always be coins with some unique properties where either one or none of these formulas can predict the number of coins per day. That's not an indication that the formulas are wrong, just that they may not be usable in a few cases.

Coins based on CuckaRoo29 / CuckaToo31 / CuckooCycle coins are examples where you never will get any correct values out of the formulas.

I just wanted to highlight this in general as I assume you will play around with quite a number of coins to do these calculations, and eventually you will find coins where they do something unique and the numbers will look strange.

In this case I entered the sources of information as you did, and from what I can see the Difficulty and NetHash forumula gives almost the same result. It was only 1 - 2 percent difference between them. However, in my case I used Block Time 60 seconds (1 minute) as this is what both CoinCalculators.io and CoinToMine reports. If you entered Block Time 150 seconds, it probably explain the difference you got.

Well, if you are right Patrike, it is 60 seconds, the person in charge of adding data in the online excel, did not do well, I and another measured the coins, yesterday the average exponential, today I will do with the complete formula . I do not know why they gave me 150 seconds.

If I am aware that the complete formula is not valid for all, but if more than 90% of the coins or 95%. I know there are some very special coins that the complete formula is not worth, as you say for example Grin, that both CC and CTM gave very different values. KARL de CTM changed numbers to make it fit, even so, I had to change its PRofit in its day to 2.1 to get closer to reality.

It's been our fault so I'm sorry. A bad data in a moment has someone. I still like the complete formula, getting the data from the coolest sites, because in the auto swtich profit mode, you enter the currency much earlier, and those who use CC or CTM will always be late with cached data.

[trucobit]

Hello, Patricke.

I noticed that when creating an API request for determining complexity, etc., the response does not recognize the name of the site of three words.

For example, https://explorer.ravencoin.world/api/getdifficulty.

try     https://ravencoin.network/api/status?q=getDifficulty       Json    proof-of-work

Thank you friend.

But sites where in the title are three words
I have more.

When I open https://explorer.ravencoin.world/api/getdifficulty in a web browser I do see the Cloud Flare protection page the first time I launch it. It basically indicates that they only allows web browser that can solve a Javascript challenge are allowed to move on to the actual page. Cloud Flare protected sites cannot be accessed as an API from applications like Awesome Miner that only load data without being a complete web browser.

There might be some solution to this, but not an easy one that I get in place right away.

Delay 5 seconds and follow the redirection of cloudflare, which will be a 301,302 or 303

[slysir]

TPLink Energy Monitor - free tool

A web based monitoring dashboard displaying energy usage data and statistics for TP-Link HS110 smart plugs.

Automatically scans for TP-Link smart plug devices on your local network on server start.
Realtime current, voltage, power readings.
Recent power usage trend chart.
Configurable power usage history logger.
Plug on/off state and uptime.
Daily & monthly energy usage totals and averages.
Historical daily and monthly energy usage charts.

https://github.com/jamesbarnett91/tplink-energy-monitor



https://i.imgur.com/DdsLefc.png

[razerf]

TPLink Energy Monitor - free tool

A web based monitoring dashboard displaying energy usage data and statistics for TP-Link HS110 smart plugs.

Automatically scans for TP-Link smart plug devices on your local network on server start.
Realtime current, voltage, power readings.
Recent power usage trend chart.
Configurable power usage history logger.
Plug on/off state and uptime.
Daily & monthly energy usage totals and averages.
Historical daily and monthly energy usage charts.

https://github.com/jamesbarnett91/tplink-energy-monitor



https://i.imgur.com/DdsLefc.png

Or kasa on android...

[patrike]

Can anyone help me out?
Some of my miners have restricted api access and others have privileged. I've followed these instructions "Awesome Miner will automatically configure the Managed Miners to use Privileged mode by default. These settings can be changed from the Advanced section of the miner properties in the Awesome Miner Options dialog." But I can't see where to change it?

What ASIC miners are you running? For most Antminers, Awesome Miner can setup this automatically:
https://support.awesomeminer.com/support/solutions/articles/35000085989-configure-privileged-api-access-for-antminer
Use the toolbar Tools -> Antminer&ASIC -> Configure API access.

This will unfortunately not work on the latest Antminer S15/T15 where no SSH access is available and no other known way of setting Privileged API access are available.

[patrike]

Hello, Patricke.

I noticed that when creating an API request for determining complexity, etc., the response does not recognize the name of the site of three words.

For example, https://explorer.ravencoin.world/api/getdifficulty.

try     https://ravencoin.network/api/status?q=getDifficulty       Json    proof-of-work

Thank you friend.

But sites where in the title are three words
I have more.

When I open https://explorer.ravencoin.world/api/getdifficulty in a web browser I do see the Cloud Flare protection page the first time I launch it. It basically indicates that they only allows web browser that can solve a Javascript challenge are allowed to move on to the actual page. Cloud Flare protected sites cannot be accessed as an API from applications like Awesome Miner that only load data without being a complete web browser.

There might be some solution to this, but not an easy one that I get in place right away.

Delay 5 seconds and follow the redirection of cloudflare, which will be a 301,302 or 303

It's unfortunately not that easy, as this is exactly what CloudFlare prevents you from doing unless you are a web browser that can compute their challenge with a Javascript engine. If you only try to download the content, you don't get any redirect to follow.

[patrike]

Awesome Miner version 6.3.3

 Features
  - New trigger for device hashrate
  - Bulk edit of External Miner properties: SSH port and SSH credentials
  - Bulk edit of Managed Miner properties: Autostart miner
 Integration
  - Add additional block explorers for wallet balance
  - Add additional pools for Mining Dutch
 User interface
  - Menu of available rule triggers rearranged into groups to make it easier to find triggers
 Version notes
  - Improved logging for the Dynamic Update feature of coin properties
 Mining softare
  - SrbMiner 1.8.5
  - TeamRedMiner 0.4.4
  - lolMiner 0.8.1
  - WildRig Miner 0.15.5
 Corrections
  - Correction to the Change Pool Group operation to ensure correct pool priority for ASIC miners
  - Correction to the password parameter name for the Phoenix Miner pool configuration file

[trucobit]

Awesome Miner version 6.3.3

 Features
  - New trigger for device hashrate
  - Bulk edit of External Miner properties: SSH port and SSH credentials
  - Bulk edit of Managed Miner properties: Autostart miner
 Integration
  - Add additional block explorers for wallet balance
  - Add additional pools for Mining Dutch
 User interface
  - Menu of available rule triggers rearranged into groups to make it easier to find triggers
 Version notes
  - Improved logging for the Dynamic Update feature of coin properties
 Mining softare
  - SrbMiner 1.8.5
  - TeamRedMiner 0.4.4
  - lolMiner 0.8.1
  - WildRig Miner 0.15.5
 Corrections
  - Correction to the Change Pool Group operation to ensure correct pool priority for ASIC miners
  - Correction to the password parameter name for the Phoenix Miner pool configuration file

Good update It could be added in Notifications, when an API fails ?, as we now use dozens of apis to configure the currencies, it is very interesting to be able to monitor those apis that have not been able to collect data, in this way have under control the large amount of apis that we are using, and that otherwise it would be impossible to monitor, and I think the notification tab would be very good.

Currency X api Difficulty problem
Currency X Api Nethash Problem

Something like that. For example, when it happens 2 or 3 times in a row, you do not need to notify the first one that it fails.

[nordmann666]

how to use new SRB Miner with that tweaking Feature?
I have to start the srb .exe as admin - but i cant through Awesome Miner

[zloyneo]

Awesome Miner version 6.3.3

 Features
  - New trigger for device hashrate
  - Bulk edit of External Miner properties: SSH port and SSH credentials
  - Bulk edit of Managed Miner properties: Autostart miner
 Integration
  - Add additional block explorers for wallet balance
  - Add additional pools for Mining Dutch
 User interface
  - Menu of available rule triggers rearranged into groups to make it easier to find triggers
 Version notes
  - Improved logging for the Dynamic Update feature of coin properties
 Mining softare
  - SrbMiner 1.8.5
  - TeamRedMiner 0.4.4
  - lolMiner 0.8.1
  - WildRig Miner 0.15.5
 Corrections
  - Correction to the Change Pool Group operation to ensure correct pool priority for ASIC miners
  - Correction to the password parameter name for the Phoenix Miner pool configuration file

Good afternoon. how to implement the ability to change with one click: pool, manner, coins, acceleration for one Riga and for a group of rigs. How to tie the acceleration to a specific Riga and its dependence on the algorithm or coin.

[JimBrown462]

Hi Patrike

Small benchmarking issue.

When benchmarking several miners for a specific algo that have previously been benchmarked, clicking "Save to profile" updates each miners hash rate, but only updates the fastest miners power usage. The other miners power usage is left as is.

Not a big deal as it does not affect any other operations, unless one wants to change what miner is being used from the fastest to something else for some reason.

Thanks,
...jim

[noko59]

Awesome Miner indicates it supports Innosilicon A8+ but no where can I find how to actually do that. Only instruction I've found is for A4, A4+ and A9 which one uses Telnet and the other SSH - No clue what applies if anything to the A8+. Downloaded SSH client Putty which also supports Telnet and not sure where to begin since nothing I do will hook up to the A8+, it keeps refusing connection other than a Browser.

Is Awesome Miner product support good? If I buy the Professional edition would I get help and not just a link to something that makes no sense to me with the information already available? Google, here and elsewhere so far I am unable to find a good instruction to hooking up the A8+ with Awesome Miner. It says it supports it but nowhere can I find out how.

[patrike]

Awesome Miner version 6.3.3

 Features
  - New trigger for device hashrate
  - Bulk edit of External Miner properties: SSH port and SSH credentials
  - Bulk edit of Managed Miner properties: Autostart miner
 Integration
  - Add additional block explorers for wallet balance
  - Add additional pools for Mining Dutch
 User interface
  - Menu of available rule triggers rearranged into groups to make it easier to find triggers
 Version notes
  - Improved logging for the Dynamic Update feature of coin properties
 Mining softare
  - SrbMiner 1.8.5
  - TeamRedMiner 0.4.4
  - lolMiner 0.8.1
  - WildRig Miner 0.15.5
 Corrections
  - Correction to the Change Pool Group operation to ensure correct pool priority for ASIC miners
  - Correction to the password parameter name for the Phoenix Miner pool configuration file

Good update It could be added in Notifications, when an API fails ?, as we now use dozens of apis to configure the currencies, it is very interesting to be able to monitor those apis that have not been able to collect data, in this way have under control the large amount of apis that we are using, and that otherwise it would be impossible to monitor, and I think the notification tab would be very good.

Currency X api Difficulty problem
Currency X Api Nethash Problem

Something like that. For example, when it happens 2 or 3 times in a row, you do not need to notify the first one that it fails.

Thanks for the suggestion. Maybe it should be indicated on the actual coin in the Coins tab as well, for example using red text to indicate update failures.

[patrike]

how to use new SRB Miner with that tweaking Feature?
I have to start the srb .exe as admin - but i cant through Awesome Miner

I've not looked into the details of this myself, but in general the mining software is running as the same user as Remote Agent (or Awesome Miner do). So if Remote Agent runs as Administrator, the mining software will do that as well.

If needed in the future, it should be possible to add a new setting for forcing specific mining software to run as Administrator.