[HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet

[nioc]

I've been having issues with the wallet ever since upgrading to v1.0.7.3. When I use coin control and combine blocks to send to my address, the coins get tied up in an unconfirmed status until I end up using the check wallet function, then repair wallet. Never had these issues with v1.0.7.2

At this time you must update to v1.1.0 if you want to be on the correct fork!

[1714112390]

1714112390

[1714112390]

1714112390

[Ense04]

I've been having issues with the wallet ever since upgrading to v1.0.7.3. When I use coin control and combine blocks to send to my address, the coins get tied up in an unconfirmed status until I end up using the check wallet function, then repair wallet. Never had these issues with v1.0.7.2

At this time you must update to v1.1.0 if you want to be on the correct fork!

I am. Just addressing issues i've had so Presstab is aware and can look into if needed. No worries.

[nioc]

I've been having issues with the wallet ever since upgrading to v1.0.7.3. When I use coin control and combine blocks to send to my address, the coins get tied up in an unconfirmed status until I end up using the check wallet function, then repair wallet. Never had these issues with v1.0.7.2

At this time you must update to v1.1.0 if you want to be on the correct fork!

I am. Just addressing issues i've had so Presstab is aware and can look into if needed. No worries.

Excellent! Carry on

[taito]

Hello I sent HYP 1200  to the address of Poloniex offered me Hyperstake and has not reached me, the transaction is confirmed 1 hour, knows what is the problem? thx

[nioc]

Hello I sent HYP 1200  to the address of Poloniex offered me Hyperstake and has not reached me, the transaction is confirmed 1 hour, knows what is the problem? thx

Best to ask Poloniex in the troll box.  Transactions are working there but when asked they said,
"I am noticing the blocks are coming through a little slower now on HYP. Not much but, a little."

[taito]

Hello I sent HYP 1200  to the address of Poloniex offered me Hyperstake and has not reached me, the transaction is confirmed 1 hour, knows what is the problem? thx

Best to ask Poloniex in the troll box.  Transactions are working there but when asked they said,
"I am noticing the blocks are coming through a little slower now on HYP. Not much but, a little."

thanks for the quick answer let the problem is poloniex, thought it could be HyperStack, I stay calmer, greetings

[LiteBit]

wow   , GOgogOGo

what must do i just see qt v1.1 fork, must update normal? or what to do?

i try this after update client

04:14:50

getblock hash 235999


04:14:50

Error: value is type int, expected bool

how to know if is running ok?
any tip?

ok i find integrated block explorer
at 235999 giveme this hash e165587140a5965f94cda6869abed770981207a946b4f2de17c8a053747a352e

what to do? with this repair??
Block Chain Bootstrap
Through block 235,000 - https://www.dropbox.com/s/d1zva60jizzoe3y/bootstrap.zip
     Usage: extract bootstrap.dat into data directory (for Windows go to "run" and type in %appdata% and find HyperStake folder), remove blkindex.dat and blk0001.dat if they exist already and use the following from command line to start the bootstrap: HyperStake-qt.exe -loadblock=bootstrap.dat
Bootstrapping may take an hour or two depending on the machine, please be patient, the bootstrap happens from the splashscreen, and clicking on it while bootstrapping may cause it to quit.

Use:  getblockhash 235999

no space between getblock & hash

you also have to type that in. don't copy and paste from the forum post. Else you'll get the "Error: value is type int, expected bool" message.

[entroxseven]

What's the right chain? The one from http://hyp.cryptocoinexplorer.com/ or the longer one?  My wallet seems to always want to sync me to the longer one with the 1.1 version.

[nioc]

What's the right chain? The one from http://hyp.cryptocoinexplorer.com/ or the longer one?  My wallet seems to always want to sync me to the longer one with the 1.1 version.

AFAIK it's the one from hyp.cryptocoinexplorer.com with the longer chain being the bad fork.

Right now my wallet it also trying to sync with the longer chain and is indicating that it is 232 blocks behind.  I have 62 active connections with the network. I have had no trouble staking and no orphans.

[nioc]

HYP is using 50% of my low end CPU when normally it uses 3%.  I guess this is due to it trying to sync with all the fork all the time.  It has been >200 blocks behind the fork for hours and trying to sync.  I am on the correct chain.

I closed HYP so I could continue to mine Monero as I can't do both efficiently. 

[billotronic]

What's the right chain? The one from http://hyp.cryptocoinexplorer.com/ or the longer one?  My wallet seems to always want to sync me to the longer one with the 1.1 version.

AFAIK it's the one from hyp.cryptocoinexplorer.com with the longer chain being the bad fork.

Right now my wallet it also trying to sync with the longer chain and is indicating that it is 232 blocks behind.  I have 62 active connections with the network. I have had no trouble staking and no orphans.

This is correct. As more clients and weight leave the incorrect chain to the new fork, the old chain will die off and the client will stop showing out of sync.

[dennislevy]

so it safe now to resync wallet? about other chain , noise23 did for tek was ,to drop or ban older version of wallet to force updates , tek now minted in under mins

I agree wallet should have banned older wallet versions. I have 2 wallets, one was open during fork, the other was not. The wallet that was open stayed on correct fork
for 24 hours then connected to bad node. Now both are out of sync. Both have minted, though I do not want to try coin control until sync problem is resolved.
Really need to kick older versions off of new fork, or this can go on for quite awhile. Blocking older versions will get their attention, as they cannot sync or mint.
That is how I found out about other coins changes. Made me go and check the ANN and find out what was up. Presstab you may have to revise latest wallet version to
stop numerous forks, as older wallets start creatin new forks? Both of my wallets are now on different block heights and different estimated blocks. For the last 12 hours,
they were on the same block height. Now in the last hour they are now different. Was one difference, then 5 difference, both are the latest version. Now both are back
on same block height. Will keep both open and monitor wallets, let you know of any changes.

Peace!
Dennis

[nioc]

HYP is using 50% of my low end CPU when normally it uses 3%.  I guess this is due to it trying to sync with all the fork all the time.  It has been >200 blocks behind the fork for hours and trying to sync.  I am on the correct chain.

I closed HYP so I could continue to mine Monero as I can't do both efficiently. 

Update:  I restarted HYP and it is back to using it's usual CPU usage.

[mafort1469]

HYP is using 50% of my low end CPU when normally it uses 3%.  I guess this is due to it trying to sync with all the fork all the time.  It has been >200 blocks behind the fork for hours and trying to sync.  I am on the correct chain.

I closed HYP so I could continue to mine Monero as I can't do both efficiently. 

Update:  I restarted HYP and it is back to using it's usual CPU usage.

Yes, the additional CPU usage is from trying to catch up on both chains. This will stop once most people update their wallets and that fork dies off. Once the correct chain is longer that the wrong one this will help as well. The current blocks are 236797. IF you have any difficulties go on IRC and help is always available there.

[presstab]

I working on some new code that will make everyone happy. It won't be ready until its ready though. Don't want to rush it out. Should be out later today.

If you are having problems with the correct chain. It is normal to say out sync (well normal for now). Check your block height vs the height at hyp.cryptocoinexplorer.com or jump on irc and ask the guys there from help, or type !height.

If you are wrong height, with version 1.1 of wallet.

Turn off wallet. Go to command line. Change to the directory that holds HyperStake.exe by using "cd c:\users\press\documents\" or whereever.

Enter "HyperStake.exe -reindex"

This should rescan your chain and hopefully make sure you are on the correct fork.

[five8andten]

how do I update from the old client to the new client on my Pi?  I tried entering in what it says to on the wiki but that didn't do anything.  I am a linux noob completely.

[xwtfbobx]

sadly i think cryptsy's wallet is on a fork awaiting confirmation, but just withdrew about 2500 hyp, and an hour later the txid is still not showing up in any of the block explorers  

edit* confirmed their wallet is ~200 blocks ahead of the  http://hyp.cryptocoinexplorer.com/  height....

sonofabitcoin... cryptsy support always sucks balls

edit#2  according to cryptsy, i need to update my wallet because theirs is 200 blocks off

[presstab]

sadly i think cryptsy's wallet is on a fork awaiting confirmation, but just withdrew about 2500 hyp, and an hour later the txid is still not showing up in any of the block explorers  

edit* confirmed their wallet is ~200 blocks ahead of the  http://hyp.cryptocoinexplorer.com/  height....

sonofabitcoin... cryptsy support always sucks balls

edit#2  according to cryptsy, i need to update my wallet because theirs is 200 blocks off

I just sent 25 HYP from cryptsy to myself, and it came right in. They are on the correct chain.

[Coinmin]

Nice updates, Presstab. Thanks!

[xwtfbobx]

sadly i think cryptsy's wallet is on a fork awaiting confirmation, but just withdrew about 2500 hyp, and an hour later the txid is still not showing up in any of the block explorers  

edit* confirmed their wallet is ~200 blocks ahead of the  http://hyp.cryptocoinexplorer.com/  height....

sonofabitcoin... cryptsy support always sucks balls

edit#2  according to cryptsy, i need to update my wallet because theirs is 200 blocks off

I just sent 25 HYP from cryptsy to myself, and it came right in. They are on the correct chain.

odd, then i wonder why the block explorer is showing my tx as not found almost 4 hours and counting
http://hyp.cryptocoinexplorer.com/transaction?transaction=6f3cd1a16fec0f90c54ca35bc2140b74cce9b3b638337e8cb215c537b186c899