[HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet

[m33]

40mb file down load with vpn running takes 2 mins , same file with hyp wallet on and staking take 4 hours

[1714824082]

1714824082

[1714824082]

1714824082

[5ick3uffalo]

Wallet not synching stuck around 3666 blocks since about 2 days,,,,

Wallet v 1.1.0.2

[presstab]

Wallet not synching stuck around 3666 blocks since about 2 days,,,,

Wallet v 1.1.0.2

Try this https://bitcointalk.org/index.php?topic=678849.msg10475602#msg10475602

[presstab]

how to use "strictincoming true" where do i put it , in debug say ,not found

Make sure you update to the very latest release on github.com/hyperstake/hyperstake

It is not in the .conf yet either, so must be entered manually.

[presstab]

Just a reminder that a lot of us are having lots of fun on testnet. It takes about 30 minutes for your coin blocks to be eligible to stake.
Binary Here: https://www.dropbox.com/s/6ogkckuut78t2h4/HyperStake-qttestnet-updatedkernel.zip

Connect instructions:

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I wrote a very simple block crawler in PHPresstab for the testnet chain http://192.241.233.70/phpexplorer/index.php

[Biomech]

For the config file, is the file name 'HyperStake.conf' (case sensitive, I assume)?

Thanks!

My config works fine with all lowercase.

This is OS sensitive. for Linux, it must be HyperStake.conf or it will be ignored. I think this is true for Mac users as well, but I can't swear to it. For windows, it can be HyPersTaKe.ConF and it will still work. Annoying, but true

[nachoig]

1.1.0.2 here and not syncing. Just got 0 connections.

Just to update, now it's syncing, with 24 connections. I don't remeber a time when I got this number, other coins always sync with no more than 10 connections in a lucky day...

Edit: now it's with 25 connections.

[5ick3uffalo]

Wallet not synching stuck around 3666 blocks since about 2 days,,,,

Wallet v 1.1.0.2

Try this https://bitcointalk.org/index.php?topic=678849.msg10475602#msg10475602

THX presstab - will try it when at home 2morrow

[presstab]

Just a reminder that a lot of us are having lots of fun on testnet. It takes about 30 minutes for your coin blocks to be eligible to stake.
Binary Here: https://www.dropbox.com/s/6ogkckuut78t2h4/HyperStake-qttestnet-updatedkernel.zip

Connect instructions:

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I wrote a very simple block crawler in PHPresstab for the testnet chain http://192.241.233.70/phpexplorer/index.php

I threw the crawler onto http://presstab.pw so it is easier to remember

[m33]

how to use "strictincoming true" where do i put it , in debug say ,not found

Make sure you update to the very latest release on github.com/hyperstake/hyperstake

It is not in the .conf yet either, so must be entered manually.

#presstab do i need to enter it every time i open wallet?

[ofeefee]

Is there a GUI for multisend or have to set this in RPC?  Was looking for s4c, I expect that doesnt work anymore?

[m33]

HyperLoan round 6
What is HyperLoan? • HyperLoan logs

How to increase your chances:

• Every week, you get a +1
• Contributions give you an edge. This is subjective, you could win above a +10 with an excellent contribution
• Being recognized as active or worthy by the community
• Dedicated address in the list (not necessary to populate it with faucet): priority
• Other?

How to decrease your chances:

• Having less than 100 posts at the time registering will get a -1

Candidates:

• +4 eatthetree3 - p9qwRDJz8Rm7Xexfq4BiYJNqJJfKLwcPWA (42 posts)
• +4 kronicblazer (on IRC)
• +4 blitz78
• +4 coinmaster222
• +4 worhiper_-_
• +3 semidead (56 posts)
• +2 johan11 (via PM)
• +3 Tpruvot (via Wikia, a first!)
• +1 diabanhxeo - pAXaGf6oNNJevd6pnQGoJP4UFU7mXbpNG6 (45 posts)
• m33 - pKNBvmDS3UMce4epLNB8vJnhUFkmugN5rD (94 posts)
• +1 shadowmoon (via PM)
• PryptoMontreal (via PM) - pFE1BUZRTVferkv1EZfU2gBLcQEqNL5Bmg

(delisted: kliown for begging; mailmansDOGE for account stolen)

What you, as a winner (not just a candidate) will have to do:

1. Create a dedicated address (if this is not already done) in your wallet and post it on the forum, so that anyone can track the progress. If you don't know how to do so, just ask on the forum
2 Once you have received the 4K HYP, you will start posting on HyperLoan logs about your feedback. It can be just one posts several posts tracking your increasing understanding of HyperStake, questions... and of course, everyone can post there too.
3. At the end of the 30 days, you will send the principal (4k) back to the originating address pHypLoanFPWT6awN1TYRQ4v3wD3yY1n8KT (courtesy of iDunk).

Happy loaning, happy stacking!

please remove my name as i dont know what needs to be done to get ahead with the plus 1, thanks . i have waited but it only goes down

[m33]

Is there a GUI for multisend or have to set this in RPC?  Was looking for s4c, I expect that doesnt work anymore?

all you had to do was look back 1 or 2 page

[nioc]

Is there a GUI for multisend or have to set this in RPC?  Was looking for s4c, I expect that doesnt work anymore?

all you had to do was look back 1 or 2 page

It's an RPC for now in the console and GUI in the future.

Link to wiki for multisend.............

http://hyperstake.wikia.com/wiki/Multisend

[gribgo]

HUYJJUJ! Hellow
Presstab, or who is doing the the coding ...
please inbuild some announcsement system.. so everybody can catch up with all the versuion updates...PLEASE!!
for someone who cant read forums... but have the wallet running.. like me

[m33]

At the advice of Sr. Otronic, I purchase this little beauty last week Cost my about $80 after getting all the parts I wanted, heat sync, case, cables, etc.  I didn't fork up the extra cash for the eMMc *yet*, and am running a normal sdcard.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433


I just got it fully synced and got my first stake with it

I am running the daemon. It takes about 5% of my CPU and 17% of memory. The CPU bumps up near 100% for about one second once every 30 seconds or so when it produces a new round of PoS hashes (without the liteStake code it would have been near 100% all the time I would guess).

I was able to compile fairly easily. I used:

Code:

./autogen.sh
./configure --with-gui=no --with-incompatible-bdb
make

Takes about 30 minutes to compile. The bootstrap takes a few hours to complete as well.

Here is a pic with coffee cup for scale. Notice that the odroid is smaller than my WDTV.

could you help with the installation of device ,i cant do linux

[billotronic]

At the advice of Sr. Otronic, I purchase this little beauty last week Cost my about $80 after getting all the parts I wanted, heat sync, case, cables, etc.  I didn't fork up the extra cash for the eMMc *yet*, and am running a normal sdcard.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433


I just got it fully synced and got my first stake with it

I am running the daemon. It takes about 5% of my CPU and 17% of memory. The CPU bumps up near 100% for about one second once every 30 seconds or so when it produces a new round of PoS hashes (without the liteStake code it would have been near 100% all the time I would guess).

I was able to compile fairly easily. I used:

Code:

./autogen.sh
./configure --with-gui=no --with-incompatible-bdb
make

Takes about 30 minutes to compile. The bootstrap takes a few hours to complete as well.

Here is a pic with coffee cup for scale. Notice that the odroid is smaller than my WDTV.

could you help with the installation of device ,i cant do linux

What do you need help with? Also, there are plenty of friendly folks on ##hypstake on freenode that would be happy to help you with any problem you might have.

[nioc]

HUYJJUJ! Hellow
Presstab, or who is doing the the coding ...
please inbuild some announcsement system.. so everybody can catch up with all the versuion updates...PLEASE!!
for someone who cant read forums... but have the wallet running.. like me

I believe the last 2 versions have what you are looking for

[m33]

At the advice of Sr. Otronic, I purchase this little beauty last week Cost my about $80 after getting all the parts I wanted, heat sync, case, cables, etc.  I didn't fork up the extra cash for the eMMc *yet*, and am running a normal sdcard.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433


I just got it fully synced and got my first stake with it

I am running the daemon. It takes about 5% of my CPU and 17% of memory. The CPU bumps up near 100% for about one second once every 30 seconds or so when it produces a new round of PoS hashes (without the liteStake code it would have been near 100% all the time I would guess).

I was able to compile fairly easily. I used:

Code:

./autogen.sh
./configure --with-gui=no --with-incompatible-bdb
make

Takes about 30 minutes to compile. The bootstrap takes a few hours to complete as well.

Here is a pic with coffee cup for scale. Notice that the odroid is smaller than my WDTV.

could you help with the installation of device ,i cant do linux

What do you need help with? Also, there are plenty of friendly folks on ##hypstake on freenode that would be happy to help you with any problem you might have.

if u buy this , i need install , but it in linux , i dun know , would be great if the install , come in .exe format, so all i have to do .pop in sdcard and run exe

[presstab]

if u buy this , i need install , but it in linux , i dun know , would be great if the install , come in .exe format, so all i have to do .pop in sdcard and run exe

You should be able to install by using the following in terminal:

Code:

sudo apt-get install build-essential libtool autotools-dev autoconf pkg-config libssl-dev libboost-all-dev libdb5.1-dev libdb5.1++-dev libminiupnpc-dev libqrencode-dev
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler

I think that is all the dependencies, someone let me know if I missed one. This bitcoin document is helpful https://github.com/bitcoin/bitcoin/blob/master/doc/build-unix.md


Then to build the daemon:

Code:

git clone https://github.com/hyperstake/hyperstake
cd hyperstake
./autogen.sh
./configure --with-incompatible-bdb --with-gui=no
make

This will go through the build process, and leave you with hyperstaked in /hyperstake/src
to run the daemon:

Code:

./src/hyperstaked &

To build the QT version, you would change it to --with-gui=qt5 and it should leave the hyperstake-qt app in /src/qt

I will update our installation page with these details.