[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[schap]

I am a micro miner, one GPU card in my desktop computer, and no programmer, just an "end consumer".  I am using the precompiled windows 64 version of ccminer 2.2.2 from GitHub.  The miner works, but I am unable to increase the intensity level when scrypt mining.  No matter what intensity I set in the command line using the -i function, no matter where in the command line I put the -i function, and even though it initially assigns more threads, it then reverts to a different (?default) intensity a few lines down. My gpu doesn't even warm up, and the hash rate is low.  Rather than overclocking my GPU, I would prefer to increase the intensity so that it works harder.  How do I get it to actually run with the intensity settings I want? This is what I see:


D:\ccminer-x64-2.2.2-cuda9>ccminer-x64 -a scrypt -o stratum+tcp://us.multipool.us:XXX -u theXXX.1 -p XXX -i 14.99

*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-11-08 06:34:23] Adding 16128 threads to intensity 14, 32512 cuda threads
[2017-11-08 06:34:23] Starting on stratum+tcp://us.multipool.us:XXX
[2017-11-08 06:34:23] NVML GPU monitoring enabled.
[2017-11-08 06:34:23] NVAPI GPU monitoring enabled.
[2017-11-08 06:34:23] 1 miner thread started, using 'scrypt' algorithm.
[2017-11-08 06:34:24] Stratum difficulty set to 131072 (2.00000)
[2017-11-08 06:34:24] scrypt block 1631827, diff 10898.083
[2017-11-08 06:34:25] GPU #0: 32 hashes / 4.0 MB per warp.
[2017-11-08 06:34:26] GPU #0: Performing auto-tuning, please wait 2 minutes...
[2017-11-08 06:34:26] GPU #0: maximum total warps (BxW): 1484
[2017-11-08 06:34:45] Stratum difficulty set to 256 (0.00391)
[2017-11-08 06:34:45] scrypt block 1631828, diff 8720.082
[2017-11-08 06:35:09] scrypt block 1631829, diff 8720.082
[2017-11-08 06:36:47] GPU #0: 589791.16 hash/s with configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631830, diff 8720.082
[2017-11-08 06:39:34] GPU #0: using launch configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631831, diff 8720.082
[2017-11-08 06:39:34] GPU #0: Intensity set to 12.0313, 4224 cuda threads
[2017-11-08 06:39:34] scrypt factor set to 9 (1024)

I XXX'd out the actual pool, worker name, password, but you can see where I attempted to set the intensity to 14.99 in the command line, was assigned extra threads, then lower down the intensity was changed to 12.0313 with only a fraction of the threads.  I have also tried with setting the T levels myself in advance, so that the auto-tuning does not occur, same result. Any help would be appreciated.  Thank you in advance.

You just change the value after -i

You have set to 14 so your running at a intensity of 14

[1714156263]

1714156263

[1714156263]

1714156263

[1714156263]

1714156263

[thecheapone]

Schap, please look again -- I did set the intensity to 14.99, but two lines from the bottom of my saved text, it gets reset to 12... not by me, it won't stay at 14 after I set it there.

[geetarora]

Hi,

I am using ccminer for electroneum. I want to use electroneum.hashparty.io mining server. I can add 1 mining rig only with 1 etn address.

I already added all rigs on suprnova.cc but i think suprnova is steeling from me. I want to shift all my rigs to hashparty.io now.

How can I add all my rigs on hashparty.io?

Thanks.

[sp_]

Bitcore @ yiimp seems to have some problems.

[ayke99]

Bitcore @ yiimp seems to have some problems.

https://image.ibb.co/dHHQnb/bcore.png

yeah i think is sp_ dev fee )

[Amph]

i'm getting unsupported extranonce size of 16 error, when mining equihash, how to solve this?

...ok it's a pool side issue...

[Spi4ka]

How to split GPUs to mine different pools?

[pallas]

How to split GPUs to mine different pools?

Run multiple ccminers with -d

[Spi4ka]

How to split GPUs to mine different pools?

Run multiple ccminers with -d

Thank you! it works !!!

[Spi4ka]

How to split GPUs to mine different pools?

Run multiple ccminers with -d

may be you know, how to change shares difficulty in pools like suprnova?

[pallas]

How to split GPUs to mine different pools?

Run multiple ccminers with -d

may be you know, how to change shares difficulty in pools like suprnova?

No way.

[Schleicher]

How to split GPUs to mine different pools?

Run multiple ccminers with -d

may be you know, how to change shares difficulty in pools like suprnova?

For some algos you can use d=xxx as the password, I think

[curr3ncytr4d3r]

When running cryptonight it exits on start with the error:

GPU #0: an illegal memory access was encountered cryptonight_extra_cpu_final line 235

I run with --intensity=18. If I remove that I don't get the error (but I cannot use my system so thats no option ;-))

[pallas]

When running cryptonight it exits on start with the error:

GPU #0: an illegal memory access was encountered cryptonight_extra_cpu_final line 235

I run with --intensity=18. If I remove that I don't get the error (but I cannot use my system so thats no option ;-))

... Try a lower value...

[tbearhere]

Is there a way to put --bfactor=10 for -d 0 and --bfactor=6 for -d 1  ect. on cryptonight algo?

EDIT: Or can I use intensity settings?

[leemaster]

will it be ever possible to use no getwork option ?

[Ventureum]

This is a brilliant tutorial and discussion.

[The_Immortal]

Guys... Please... How to fix it?

result for nonce 27c0a4ae does not validate on CPU!

 

What does it mean?

Intesity is on the minimum - 8.
No OC at all (stock settings)!

[insaniak]

What would cause this issue? It doesnt do it immediately but sometimes I get this error and cc miner freezes.
GPU #0: aes_cpu_init all CUDA-capable devices are busy or unavailabl

[pallas]

will it be ever possible to use no getwork option ?

That requires implementing support for getblocktemplate (as an alternative to getwork). Not trivial.