@crysx, what are your settings for 750ti to get 6.0 MH/s at stock clocks? Mine are only doing ~5.5.
i was completely wrong about the hashrate ...
when it first starts it hits around the 6MH but slowly settles on a lower rate ...
i try and push the intensity levels up to the highest it can go ( which adds up to a huge amount of cuda threads ) - and ends up killing the miner ...
im assuming this is for quark? ...
ill setup the test system ( this one only has 2 x gigabyte 750ti oc ( 1 x oc and 1 x lp ) ) right now and see what levels we get standard ... it will be mining on the sp donation link ( stratum+tcp://donate.granitecoinx.com:7919/ ) so you can see the progress here -
https://www.westhash.com/index.jsp?p=miners&a=12&addr=1CTiNJyoUmbdMRACtteRWXhGqtSETYd6Vd ... or here -
http://yaamp.com/?address=1CTiNJyoUmbdMRACtteRWXhGqtSETYd6Vd ... in the case of a failover ...
westhash is placed first - then if it fails - the link initiates the failover to yaamp ... soon all donation links will have a failover in the order of ...
1 - westhash
2 - nicehash
3 - yaamp
not much we can do if all of them fail though
... but the system will keep checking each one until one of them comes back ...
the parameters for linux ( fedora 20 x64 ) are these - ./ccminer -o stratum+tcp://donate.granitecoinx.com:7919/ -O chrysophylax.donate:x -a quark -r 7 -R 7 -i 24 ...
edit - westhash quark is down for the moment with yaamp having - extranonce2 size=2 errors - on the miner ...
at least the stratum proxy is functioning properly
... westhash is down so it switches to yaamp as a failover while checking to see if westhash will come back up ...
nice ...
...
the hashrate using the above parameters is getting around the 5700KH ( above and below ) for quark ... but too many errors at the moment ...
-------
[2015-05-13 13:00:03] accepted: 237/519 (45.66%), 11389 khash/s booooo
[2015-05-13 13:00:03] reject reason: Invalid extranonce2 size
-------
i think westhash and yaamp need to reset their backend stratums again ...
#crysx