Any idea when leonardo will finally support BTG cleanly? Every time it needs to reconnect or otherwise get a disruption on the internet connection, all chart data is lost and i can only see the last 30 minutes or so..... I can still see all my buy and sell trades but ...... thats really annoying...... Oh btw, it's the case on nearly every currency on bitfinex....  Hacky We will look into it. Are you still having this on every re-connect? All the best, Rene |
|
|
|
Any idea when leonardo will finally support BTG cleanly? Every time it needs to reconnect or otherwise get a disruption on the internet connection, all chart data is lost and i can only see the last 30 minutes or so..... I can still see all my buy and sell trades but ...... thats really annoying...... Oh btw, it's the case on nearly every currency on bitfinex.... Hacky The devs have to restart the data collection manually. It's planed to automate this, though. We are having issues with changing API request limits on the exchanges. We are working on it, but also already applied fixes. So it should run better already. All the best, Rene |
|
|
|
P.s.: Any idea when bitcoin.de might be aviable too?  Bitcoin.de is becoming a priority for us. We are really looking forward to adding it soon! Best wishes, Jonathan Yeah, i'd like to have direct access to bitcoin.de via leonardo too ... but i think, fixing this bitfinex problem would be a bit more important actually. By the way .. it cannot keep it's data even if it is running for hours .. at some time, it always loses the history for btgbtc on bitfinex, it's a bit annoying. It even needs sometimes up to a minute or more to update my actual orders on the gui. Sadly. Oh and yes, the margin maker always leaves small amounts in the involved wallets. They accumulate over time until i stop the bot and manually sell them. It's a bit inconvenient but not a problem for me at least. Greetings, hacky Yeah, with the way Bitfinex are restricting the API call limits there are no guarantees that leonArdo can perform the way it should there. Implementing web sockets n Bitfinex is a top priority for us. Best wishes, Jonathan |
|
|
|
I can't seem to find a setting for 100% liquidation of a position. Every sell order that the bot creates, a small amount of the assets is left untraded, and a balance begins to accumulate. Is there a setting I'm missing or have unchecked?
This is most likely due to the fact that we assume taker fees which on most exchanges are more than maker fees (often 0.25% vs 0.15%). The reason we assume taker fees is to overshoot rather than undershoot as the type of fee is most times not explicitly knowable through the exchange API. This often results a balance accumulating. Does that explain it? Best wishes, Jonathan |
|
|
|
I can't seem to find a setting for 100% liquidation of a position. Every sell order that the bot creates, a small amount of the assets is left untraded, and a balance begins to accumulate. Is there a setting I'm missing or have unchecked?
Hey, can you send us info about which Exchange and Pair you are trading on. Maybe even a screenshot would be helpful. Just send the info to support@marginsoftware.de and we will get back to you asap. All the best, Rene |
|
|
|
*Sigh* Any suggestions? I Already deleted the .leonardo dir and so tried to re initialise leonardo (3.5.0-beta build: 11228543) but .. well see for yourself:  I hope we will see an update for that bitfinex problem soon, it's starting to cost money...... Greetings, hacky Until there is an update with Leonardo I think you are out of luck. Bitifiniex has tighten up the access to its API and Leonardo is not API friendly anymore. Wait to hear what Jon has to say. Heh yea i know ... but at least it still worked as monitor ...... but now, by the way even on ethereum, i just see this line over hours... Oh did i forget to mention that it was running nearly all day long and i _had_ all chart data on the screen til i restarted it? Meh..... it get's a bit annoying actually....... Hacky Hey, we identified the problem and already applied some fixes. Still checking if we got all corner cases. But it should already be much more stable. Sorry for the inconvenience. All the best, Rene Yeah i know, and i will be patient, i know you guys do your very best to get us back on track asap. LeonArdo and the margin maker bots still perform like a dream on Bittrex and Poloniex ...... i hope i can make enough to purchase another license and fill the wallets for another exchange to make more coins soon .... w/o leonArdo, this would be impossible at all for me. Greetings, hacky P.s.: Any idea when bitcoin.de might be aviable too? Bitcoin.de is becoming a priority for us. We are really looking forward to adding it soon! Best wishes, Jonathan |
|
|
|
*Sigh* Any suggestions? I Already deleted the .leonardo dir and so tried to re initialise leonardo (3.5.0-beta build: 11228543) but .. well see for yourself: I hope we will see an update for that bitfinex problem soon, it's starting to cost money...... Greetings, hacky Until there is an update with Leonardo I think you are out of luck. Bitifiniex has tighten up the access to its API and Leonardo is not API friendly anymore. Wait to hear what Jon has to say. Heh yea i know ... but at least it still worked as monitor ...... but now, by the way even on ethereum, i just see this line over hours... Oh did i forget to mention that it was running nearly all day long and i _had_ all chart data on the screen til i restarted it? Meh..... it get's a bit annoying actually....... Hacky Hey, we identified the problem and already applied some fixes. Still checking if we got all corner cases. But it should already be much more stable. Sorry for the inconvenience. All the best, Rene |
|
|
|
*Sigh* Any suggestions? I Already deleted the .leonardo dir and so tried to re initialise leonardo (3.5.0-beta build: 11228543) but .. well see for yourself: I hope we will see an update for that bitfinex problem soon, it's starting to cost money...... Greetings, hacky Until there is an update with Leonardo I think you are out of luck. Bitifiniex has tighten up the access to its API and Leonardo is not API friendly anymore. Wait to hear what Jon has to say. We hear you Hacky. Yeah, leonArdo does it's own local data collection when running, but after a restart it pulls from our servers. I am onl holiday for a week, but the guys are on it and will update soon. Best wishes, Jonathan Heh yea i know ... but at least it still worked as monitor ...... but now, by the way even on ethereum, i just see this line over hours... Oh did i forget to mention that it was running nearly all day long and i _had_ all chart data on the screen til i restarted it? Meh..... it get's a bit annoying actually....... Hacky We hear you Hacky, When leonArdo runs it collects itslef, but on startup it has to pull from our servers. I'm on holiday for a week, but the guys will take a look and get back to you. Best wishes, Jonathan |
|
|
|
It's taking up to fscking two minutes to adapt a single order on bitfinex for btcusd, whilst having just _only_ this pair open. That's not runnig well right now.... Hacky Yes we know. You have to probably wait for the update. You can open a tools Window and add a polling scheduler to see what is currently allowed and to get a view of the queue of API calls. This is not our fault. Bitfinex just recently changed it and today I was restricted to 8 calls in a minute - horrible! We are implementing web sockets which should make it rocket again. Best wishes, Jonathan |
|
|
|
I want to ask can i pay with Eth guys?
Sorry, we currently only accept bitcoin. We are updating our website and will add other payments options soon. Best wishes, Jonathan |
|
|
|
Hey everyone, Just wanted to give you a heads up that there is an imposter site pretending to be us. We are currently in the process of taking it down. Our real website is https://www.marginsoftware.deso please take care! Thanks to Isacc for giving us a heads up about this. Best wishes, Jonathan |
|
|
|
I wanted to give my kudos to the leonArdo team. I purchased the bot last Friday, and had some API problems while trying to get the program setup (my own fault). The team provided me multiple times a solution to my problem by email. Each response was less than 24, normally around 12 hours, which is unheard of for support over the weekend. Great job! And thank you.
I second that, usually it runs just out of the box and if you have a problem, they're very keen to don't let anyone down but quickly answer emails to the support address. Even if you're not (already) a customer (as i was in the first few weeks ). Regards, hacky Thank you so much  We are trying to give you guys one of the best support services in the crypto/blockchain scene |
|
|
|
any plans to add binance exchange?
Would be interesting for me, too. Any plans in near future to add binance support? Would be great! Thanks for your suggestions! Our wish-list is growing each day All the best, Rene |
|
|
|
sorry if this is asked all the time, but is there plans or a way to use Cryptopia with this bot?
We will add more exchanges in the near future. But Cryptopia is not on the near horizon. We have to focus on the most popular ones for now and spend our effort on new bots |
|
|
|
 hi. I have a question. Why is the order long in time and not repositioned? statistic interval = 2 hrs max.order age = 0.10 hrs go for it! = true bot can increase trading amount = true I notice this often. The most important parameter you have to look at is the Min effective gain. I can't see in the image you posted, but I assume the sell order is constrained at that price because the bot made a buy at some point beforehand and if the sell order was placed at a cheaper price the Min effective gain would be violated. The reason the order is not replaced is a feature in this case. If it is replaced at the exact same price there is no point in actually cancelling and replacing the order. I hope that answers your question. Best wishes, Jonathan |
|
|
|
Due change of Bittrex TOS I would like to buy full leonArdo markets, how I can conjunction that?
Edit
Now we in need to leonArdo adding more exchanges such as hitbtc etc,,
Can you send me a mail to support@marginsoftware.de regarding an upgrade? Yes, we will continue to add more markets at a much faster pace over the next few months. Best wishes, Jonathan |
|
|
|
I finally managed to get my leonardo back in a 'working state' .. had a few weeks with crashes on the last 4.3.x releases, now installed/upgraded 2 laptops to 3.5.0 and 'on the road' for a while, which is some bit of a hassle actually. First, bitfinex is nearly un-usable righ now. I had 10 open pairs with average 4 to 5 running margin makers on them which is actually not nearly possible because leonardo already hangs sometimes for minutes if you only want to process a single manual order! Additional to that problem, i actually have now licenses for bitfinex, bittrex and poloniex ... but _SADLY_, hanging bitfinex transactions/db-re-inits/syncs eventuall lead to the whole UI hanging at all, sometimes up to a crash or neccesary process termination/kill to get me back into a safe states on fast moving swings...... So, actually, i'm using one leonardo instance on one machine to have it running on poloniex and bittrex, which runs fine and very fast, for this part the update is really nice. On another laptop i have the next leonardo install but only with bitfinex open, which nearly steadily hangs, delays with inresponsive ui, suspends the bots and all that stuff. I learned - whilst catching up with this thread - that there is a new limit on the bitfinex API? Well, as i tried to analyze the problem even with initializing on bitfinex, i saw a lot of opened and closed TCP connections to a specific IP range which looked a bit strange to me, i suspect connections to bitfinex and/or leonardo transaction log servers behind that? Overall, the new release seems to be more stable compared to the last 3.4.1 release but has a _BIG_ problem with bitfinex api which urgently need to get hands on, because that's actually the more important exchange for a lot of disappointed poloniex users (like me;)). I have a feature request too; Please give us command line parameters! I need a way to have more than one leonardo running at a time with the same user on windows, so i don't need additional machines to run more than one windows leonardo install. (nope, i can't use virtual machines for this sadly.) Oh and another "little problem" ... on windows, there is no way to right click a exchange, a pair or a strategy to save it. You _have_ to close leonardo completely to get your actual setup saved to disk and in one of 2 times, leonardo even can't do that but just crashes. Greetings, hacky Hi Hacky, Thanks for your feedback. Yes, we know that there are issues with Bitfinex. They just changed the API call quotas making it very slow if you loads more than a few bots/pairs. But we are busy implementing websockets for Bitfinex so that we don't have those issues anymore. Hoping to get this patch release out within a week or so. As for right clicking and saving strategies. I just tried that and it works. I don't undertand what you mean by saving an exchange or a pair? Best wishes, Jonathan |
|
|
|
Hello guys,
I would like ask you when will be the new version with the stoploss and take profit option on Bittrex ready? (approximately)
I can see your bot is really great right now, but I am waiting with the purchase because my trading strategy rely on these two features a lot.
6 weeks away.... Very excited about the release of the new version of leonArdo with the features. Can you share any sneak peak, or is it too early? Still too early. We have a patch release coming with a couple of updates and then it's full steam ahead with new bots! Best wishes, Jonathan |
|
|
|
I finally managed to get my leonardo back in a 'working state' .. had a few weeks with crashes on the last 4.3.x releases, now installed/upgraded 2 laptops to 3.5.0 and 'on the road' for a while, which is some bit of a hassle actually. First, bitfinex is nearly un-usable righ now. I had 10 open pairs with average 4 to 5 running margin makers on them which is actually not nearly possible because leonardo already hangs sometimes for minutes if you only want to process a single manual order! Additional to that problem, i actually have now licenses for bitfinex, bittrex and poloniex ... but _SADLY_, hanging bitfinex transactions/db-re-inits/syncs eventuall lead to the whole UI hanging at all, sometimes up to a crash or neccesary process termination/kill to get me back into a safe states on fast moving swings...... So, actually, i'm using one leonardo instance on one machine to have it running on poloniex and bittrex, which runs fine and very fast, for this part the update is really nice. On another laptop i have the next leonardo install but only with bitfinex open, which nearly steadily hangs, delays with inresponsive ui, suspends the bots and all that stuff. I learned - whilst catching up with this thread - that there is a new limit on the bitfinex API? Well, as i tried to analyze the problem even with initializing on bitfinex, i saw a lot of opened and closed TCP connections to a specific IP range which looked a bit strange to me, i suspect connections to bitfinex and/or leonardo transaction log servers behind that? Overall, the new release seems to be more stable compared to the last 3.4.1 release but has a _BIG_ problem with bitfinex api which urgently need to get hands on, because that's actually the more important exchange for a lot of disappointed poloniex users (like me;)). I have a feature request too; Please give us command line parameters! I need a way to have more than one leonardo running at a time with the same user on windows, so i don't need additional machines to run more than one windows leonardo install. (nope, i can't use virtual machines for this sadly.) Oh and another "little problem" ... on windows, there is no way to right click a exchange, a pair or a strategy to save it. You _have_ to close leonardo completely to get your actual setup saved to disk and in one of 2 times, leonardo even can't do that but just crashes. Greetings, hacky Thanks for the detailed report. We are looking into it! |
|
|
|
I really really want to like leonArdo but it's hard.
I have laptop which cannot be connected to net 24/7 so thats not an option. Cant buy new computer just for leonArdo.
I have couple of extra Raspberry Pi 3's, but it won't run in Raspberry.
It wont run in ASUS QM1-C007 STICK PC WIN10.
Could some one please find cheap Raspberry or stick pc type of computer which runs multiple pairs okay? I'm sure there are others who would run it in separate small computer which is easy to keep 24/7 online and don't use tons of power. Thanks!!!
You need at least an X86 processor. I have a q1900-itx from asrock at home (if leonardo does not occpy a laptop;)) you can simply pick virtually anone from this list: https://www.board-db.org/search.php?q=&ram_min=2048&cpu_64bit=on&cpu_arch=x86&lan_speed=0&order=price&order_d=a#resultsx86_64 cpu arch, 2gig ram, probably a vga display for initial setup might be enough if you use a remote connection later ... look for dvi or better hdmi instead. Hacky Thanks. you're welcome. as followup, i'd like to see a arm port too, considering that ubuntu is based on debian and there is an interesting armbian fork/port which supports a lot of arm based SBCs, this might open a nice to have niche too. But there are sadly some different ARM processors with different FPU and feature sets, so that might be not so easy at all. The other question is, if it might be possible to get the main functionality "downscaled" to a daemon which then can run on some dedicated device or VM and then get connected by the UI to manage it? This can further reduce the needed resources and even make it cheaper to have it running on a remote vm/server on the internet. One can simply restrict API connections to localhost and use an ssh tunnel to connect to it for example, so no additional encryption might be needed... Well, ideas. Hacky The downscaled version also already crossed our minds. But the best solution would prob. be something like the up core board with just features an intel processor. Supporting another platform is always a lot of work, implementing and also maintaining it. Adding support for these would mean diverting resources from bots, etc.. All the best, Rene |
|
|
|
|
Show Posts
