My miners have been down at the NeiMeng site for over 12 hours. Put in a support ticket but have not heard anything.
Anyone else having a similar problem?
Can you post what you see in the miner monitor offline history for the 23 and 24th, along with how many machines are down to see if you were also affected at 9:30pm their time? It'll be going on six hours since the first reported time down in several minutes, no idea if that's correct though. EDIT: That can't be done now, the monitor site has an error. The original section miners are still going. EDIT2: Miner Monitor site working again. I now show 13 offline hours for tomorrow, but I think it should say 14, maybe it will catch up in another half and hour. Mine is reporting 2 and 3 hours (for one miner) (It's been over 10 hours) NeiMeng-1 2015 3 24 3 NeiMeng-1 2015 3 23 2 |
|
|
|
My miners have been down at the NeiMeng site for over 12 hours. Put in a support ticket but have not heard anything.
Anyone else having a similar problem?
Lee reported the issue in the previous page. |
|
|
|
|
Lee,
I was wondering how the offline hours are calculated.
One of my miner has been down for like 6 hours now and 2 hours are in the offline register. (Current Maintenance)
Also had a miner down for like 2 hours last week and was still showing Online in the monitoring UI but the "last update" information wasn't updated and the unit wasn't hashing This has not been reported in the offline report.
Thanks you ! :-)
|
|
|
|
neimeng data center have some problem and is proceeding maintenance right now, expect to be completed within 3-4 hours
Thanks for the update! I just sent an email about it but I should have checked this thread first... same  |
|
|
|
|
Check the asic stats, i guess you have some chips that overheat and got throttle
|
|
|
|
|
The only issue with the concept device is the fact that some printer has a buffer which contains the printed data and it won't be deleted.
They don't talk about it but they are saying "use it on a printer that you can trust".
|
|
|
|
|
Unit has been replaced.
Thanks !
|
|
|
|
I had a miner working at 1/2 speed and Lee replaced it
Barbara
Thanks for the feedback ;-) |
|
|
|
|
One of my unit looks like to be running half blade since a 4-6 hours. Just reported the problem. I guess this gonna have to wait a few more hours until Lee can check that.
Wish we had remote access or a button to manually reboot the unit thought the miner monitoring UI.
Anyone else had this "half blade" S5 issue before ?
|
|
|
|
|
bitmain price went down to 340$
|
|
|
|
|
Guys, all your warnings from your past experience is highly appreciated. That is why I choose Lee's service to try and experience with hosting outside my home.
Glad you guys want to share your fears of been scam with this hosting. This is one of the reason which I would not try their service.
Barbara, it's really cool that you decided to keep you occupied yourself with Bitcoin ! You should write down all your story from the start and share it with the community. ;-)
Best of luck !
|
|
|
|
I would be interested in one. If it's still possible |
|
|
|
I know I've been more than busy for a long time, and it's still the case, but yesterday, I decided to take a break for 1 hour to assemble the S3 upgrade kits I just received. And I decided to try my good old USB control interface on it. here is the result with latest CGminer from bitmaintech website: https://i.imgur.com/ubS6i9z.png?1Next step will be to check what's needed to make it work on a native S3 or an S5 Since I don't have enough hours in a day at the moment to work on it as fast as I'd like, I'll offer for download the latest files for the 2 port controller in a few days, after I review them and finally solder some of the boards I received from the latest revision. The design can be easily upgraded to allow BE200 based units interface. I'll still slowly continue the work on the 8 ports interface, at least for myself. still interested in one of your 8 ports interface ! |
|
|
|
If any of you have some old power cable for the controller board. I would take some. (at least one ) PM me ! |
|
|
|
My wild guess would have been that you flashed your controller with the C1 model firmware (which has 4 blades) or just came with that firmware. I guess this is not the case here since you did flash the unit with the latest S5 firmware. Very strange |
|
|
|
@phillipma1957: Sent you a PM for the last S5 you have hosted with Lee.
sorry sold it about 15 minutes ago. @ lee I sold all four of my miners Nightshiftgirl first sale HerbPean second sale jmumich third sale no141 fourth sale All 4 s-5 had hosting paid until march 20 please transfer all four to them. Now I need to find some one to tear down and rebuild my chimney. No more hosted and I sold most of my coins. Sucks  Yeah It does. I have Been in this house since 1992. I have had the original chimney repaired 4 times. No more repairs I want a new one. It goes inside the home from the furnace to the roof and is next to the bedroom. So when I really thought about it leaking water into the home for the fourth time! I started thinking maybe it could leak furnace gas into my bedroom. So this time I spend enough for a total replacement. Best of luck ! |
|
|
|
@phillipma1957: Sent you a PM for the last S5 you have hosted with Lee.
sorry sold it about 15 minutes ago. @ lee I sold all four of my miners Nightshiftgirl first sale HerbPean second sale jmumich third sale no141 fourth sale All 4 s-5 had hosting paid until march 20 please transfer all four to them. Now I need to find some one to tear down and rebuild my chimney. No more hosted and I sold most of my coins. Sucks |
|
|
|
I have a pending deal for 1 of my 4.
So I have 3 left/ I sold one off.
3 left
At lee how do we transfer 1 miner to the buyer?
I sold one. I will pm the sale info to you.
The buyer paid me in btc 1.2977 which is about 380usd.
@ lee I sent the transfer pm to you.
Got my last PM ? I mis read it. No worries . okay here goes I sold one and 1 is on hold for HerbPean. this means I have 2 more. Thanks  |
|
|
|
|
Well if both of you confirm that it wasn't free at 419$ i might be wrong.
I was sure i tried ups and shipping was still 0.
|
|
|
|
|
Show Posts
