Dammm i hate those stale blocks !

+4.20%

No kidding !

I guess he means gh/s

Well our moderator didn't not log since like 10 days ...

You only pay custom fees when you order from outside Canada. No taxes

If he reselling his stuff through a company of his own, that would force him to add the additional local taxes.

Corsair RM 1000 spec => All PCIe connectors, on the other hand, use 16AWG

Room temp is like 24-26 degrees but the miner are next to a window and it's like -15 outside

I don't think you can really push them over 300 WATT per PCI-E. Spec say 288 max.

Mines are running at 250W, cable just a bit warn...

Maximum power output – each SP20 requires 1152 W RMS continuous power. Spoondoolies-Tech recommends adding a 20% margin to handle power peaks

Beware that not all the S3 can be OC.

You might have of the many units that don't.

Also, make sure you use 4 PCI-E and not just 2. (This is very important)

thanks again for all this additional information guys !

I guess i'm going to find a cheap PDU backup just in case my main one failed.

Thanks

Hard reset => fixed

EDIT:

08/02 18:09:08:
Started!
08/02 19:20:57:Lazy ASIC [3] - consider disabling it if this happens more then every 10 minutes
08/02 19:20:57:restart_asics_full (Lazy asic)
08/02 19:20:57:Testing LOOPs (verbose=0)
08/02 19:20:57:Testing LOOPs done = ret=0
08/02 19:20:57:Restart ASICS done :)0
08/02 20:16:19:Lazy ASIC [7] - consider disabling it if this happens more then every 10 minutes
08/02 20:16:19:restart_asics_full (Lazy asic)
08/02 20:16:19:Testing LOOPs (verbose=0)
08/02 20:16:19:Testing LOOPs done = ret=0
08/02 20:16:19:Restart ASICS done :)0
08/02 20:22:25:Lazy ASIC [7] - consider disabling it if this happens more then every 10 minutes
08/02 20:22:25:restart_asics_full (Lazy asic)
08/02 20:22:25:Testing LOOPs (verbose=0)
08/02 20:22:25:Testing LOOPs done = ret=0
08/02 20:22:25:Restart ASICS done :)0
08/02 20:23:35:Testing LOOPs (verbose=1)
08/02 20:23:36:ERROR: Loop failed 2 !
08/02 20:23:36:ERROR: Loop failed 3 !
08/02 20:23:36:Testing LOOPs done = ret=6
08/02 20:23:36:Data Timeout on read fffe:70 (1), (problem:6)
08/02 20:23:36:restart_asics_full (read timeout on problem or AC2DC fail)
08/02 20:23:36:Testing LOOPs (verbose=0)
08/02 20:23:36:ERROR: Loop failed 2 !
08/02 20:23:36:ERROR: Loop failed 3 !
08/02 20:23:36:Testing LOOPs done = ret=2
08/02 20:23:37:Testing LOOPs (verbose=0)
08/02 20:23:37:Testing LOOPs done = ret=4
08/02 20:23:37:Restart ASICS done :)0

Settings:

Temp Front / Back T,B
18 °C / 56,48 °C
Fan Speed
40
Start Voltage
0.68 / 0.68 / 0.68 / 0.68
Max Voltage
0.73
Max Watts
250 / 250 / 250 / 250

Sooo i got one my SP20E that i reported to have CGminer to restart once in a while. This time the same thing happen but the last chain(2-3) is now always disabled. Tried a soft reboot and didnt't work. will try a full power off once i have access to it.

Anyone else experiences something like this ?

Thanks guys !

NP !

Your current configuration for your pool is set to rollover after a failure.

Meaning, the miner will always mine at the first pool then will try the second one if the first fail.

I think there is way to mine like 33% for each of the 3 pool if you want. just not sure how to do it. But you won't be able to mine all 3 at the same time, it will be one after one.

And one miner can only mine on one worker per pool. (Meaning the one you set in your config)

As for your earning, it depends on how your pool reward works. No idea for BITCOINCZ

I'm about to install a dedicated 240v line for my miner at home. (Canada)

Going for 30 amp.

I'm looking for a PDU solution that doesn't cost to much $$$.

All i need is C13 connectors for my ATX PSU. (Like 10 would be great)

Any suggestion ?

Thanks.

Strange, the link I posted show a S3+ sticker in front of the unit, i'm pretty sure I have one too at home that show S3.

Maybe they removed it from batch to batch ...

There is a sticker in front of the unit saying S3+ => https://bitcointalk.org/index.php?topic=921010.0

They had an issue with the DC/DC converter in the S3 which they kind of fixed with the S3+. Not sure you can see a physical difference on the DC/DC converter with your eyes. Maybe someone can point you out something on the board but i can't. I don't own an S3+.

LOOOOOL

hahaha thanks !

i would thanks !