I pointed a second stick to my club address, this one also only at 125 freq. I need to get a second hub so I can up-clock these a bit.
I might suggest getting some Y adapters for them aswell if you really want to play with them. They allow you to get much higher freq's. I still have not had time to set up mine yet for a nice OC. Y adapter link http://www.ebay.com/itm/221661361513?
|
|
|
I'm going to get one, just for the fun of it.
This is funny how people come here just to complains.
I'm not looking for an ROI.
It might be not perfect, this is the first version.
Throw them some feedback and it might become what you want.
It's 29 US + shipping ... I mean i pay that just in Gaz every week... No big deal.
Just my 2 cents
|
|
|
***Sorry guys I posted this in the S+ thread instead of here.***
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/ (I'm pretty sure the BBB is good)
|
|
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working. I told them i have 4 four green lights (D1 to D4) plus a red one at D5 on the daughter board. Fan running slow... I would be surprise the BBB is DNA too. That is pretty specific seems like that would help them on finding it. Sadly you will have to contact them, you cant do much of anything now without ruining warranty. To bad they don't compensate for downtime. You might ask nicely for them to ship next part out without you having to ship parts back to make it faster, not sure if they will do it. They might want to look at entire thing after it all, which would suck. My bad i posted this in the S5+ section and it's for a S5. ! Sorry guys Notlist3d thanks for your feedback men, appreciated !
|
|
|
I'm suppose to get mine tomorrow or the next day (2). I will probably test them with 2 Corsair RM1000. (My IBM 2880w is not ready yet).
I will keep you posted.
|
|
|
I'm looking for one SP20 Controller board.
EDIT: IF you have a defective one with at least the Ethernet Port powering up (lights on) I might be interested
Thanks
Herb
|
|
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working. I told them i have 4 four green lights (D1 to D4) plus a red one at D5 on the daughter board. Fan running slow... I would be surprise the BBB is DNA too.
|
|
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
|
|
|
I didn't get share for nearly a day so the problem is most likely way beyond the stick. Regardless, it doesn't change anything overall but i tried the --suggest-diff variable, really cool i didn't know that existed. ck.solo started with my suggestion.
For the volt/clock, i set the clock to 175mhz and i didn't even set a volt setting. If someone has a recommendation i'm all hear, i tend to always start with a single HW.
try at 125mhz then 150mhz I confirm the --suggest-diff 7 is working ! add that to your command line. You should see accepted share really quick or HW
|
|
|
another Live view: 376717 solved by ckpool congrats to the lucky one! 17UhZWXLyiHmPmAb4VdFweGWRYY52qjxwp Edit: with 100TH wow! {"hashrate1m": "100T", "hashrate5m": "97.6T", "hashrate1hr": "97.1T", "hashrate1d": "95.8T", "hashrate7d": "48.2T", "lastupdate": 1443547811, "workers": 81, "bestshare": 25945985.412422385} Congrats. Hang on though. How come that was solved with 25m bestshare, even though my stats showed 60m+? Cheeseater again ! I wish I had your luck ;-) Congrats !
|
|
|
IF my miners ship, and IF they are under-performing, I will be asking for closer to the $238 USD per miner discount that they are selling them for... "Batch 1" @ 4.86 GH/s for $1823 USD "Batch 2" @ 4.66 GH/s for $1585 USD I'm sad to see they are only offering $65 USD refunds for people, this doesn't nearly come close to the difference they are charging, not to mention the long term effects of the missing hash. This is sad ...
|
|
|
So, some units from batch one are 4.66 and some are 4.86.
Two model of S7 in the same batch.
This is very strange.
Mine are still stock at the custom for a day...
I hope i'm getting the Batch 1 "Version 4.86"
|
|
|
He should not need to use another pool. This entire thread is people who are mining compacs to that pool so we know it works . If you need to change difficulty I believe you can do it with cgminer using: --suggest-diff number here It was just for the debugging purpose ;-) Those the pool support it ? If yes, let me know. I will set it for my stick Thanks
|
|
|
I'm trying to figure out whats wrong with my stick, it was working yesterday. {"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "0", "lastupdate": 1443529090, "bestshare": 1784472.3383183172} Edit: Well i just rebooted the computer and re plugged the stick and now after quite a while i got a share. But weird. I'll definitively blame this one on W8. Not a single share overnight? Wtf. I think everyone has had lot's of trouble with W8 also. Just a thought, is W8 turning the port off in power management? EDIT: forgot, if it turned the port off, the stick would probably show zombie. Hmm not really, but i had another problem, W8 just lost networking, maybe the computer froze, it would not be surprising considering i'm mining with 5 GPU on it. I've downclocked the GPUs a little bit now maybe it will help. Maybe there was some GPU mining conflicting with the other ASIC mining instance? Hell if i know, i never had this problem when i was doing this on W7. First the Diff is 1K, it will take a few minutes to send 1000 shares at 9 GH/s. Two, you have an hardware error. So your voltage is not correctly set. Meaning you probably lost your first 1000 share meaning no hash on the pool side. I suggests that you use another pool that you can set the diff to 9 and debug it that way (adjust the voltage a bit)
|
|
|
playing with my stick as we speak, trying higher freq
Back on track. I need to buy a powered hub ^_^ If you really want to push them you need a Y cable or something to allow power from 2 USB ports. Unless you are getting a ton of power through 1 port somehow. With Y cable I am able to get 16gh out of a stick. I need some time to built something to hold my usb stick nicely in front of a fan to cool it as it get's warm at 16gh. Yeah just ordered a few ;-) thanks Which ones did you order Herb? I am returning the ones I bought because I neglected to read the fine print and the end which goes to the stickminer is a 'B' connector. Tis what I get for drinking and mining. By the way, does anyone know why my name doesn't have a hash number beside it in Phil's list? It has a U and he said he sees all members are hashing, but no amount listed for me yet. Edit, what are people's best share number? I have 8.9M at the moment after about 24 hours of having two sticks mining without touching them. I touched them too much yesterday morning. The one Phil mentioned in the common review thread of the stick (Beta tester) EDIT: http://www.ebay.ca/itm/1Ft-USB-2-0-A-Female-to-2-x-male-Y-Splitter-Extension-Extender-Lead-Cable-Power-/221661361513?hash=item339c0bf569EDIT2: Phil can you confirm it's the good one ? Just to be sure
|
|
|
playing with my stick as we speak, trying higher freq
Playing with your stick huh? Are you sure you're on the right forum? Sorry, maybe I shouldn't have had that second glass of wine tonight Never tough of that one before I write it down ! Good one ;-)
|
|
|
New plan. Batch 2 heatsinks will now be pink.
It's time i get a few sticks for my girlfriend !!!
|
|
|
playing with my stick as we speak, trying higher freq
Back on track. I need to buy a powered hub ^_^ If you really want to push them you need a Y cable or something to allow power from 2 USB ports. Unless you are getting a ton of power through 1 port somehow. With Y cable I am able to get 16gh out of a stick. I need some time to built something to hold my usb stick nicely in front of a fan to cool it as it get's warm at 16gh. Yeah just ordered a few ;-) thanks
|
|
|
playing with my stick as we speak, trying higher freq
Back on track. I need to buy a powered hub ^_^
|
|
|
playing with my stick as we speak, trying higher freq
|
|
|
|