senseless
|
|
October 01, 2017, 01:37:42 PM |
|
Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
|
|
|
|
Dogedarkdev (OP)
Legendary
Offline
Activity: 1708
Merit: 1009
$XVG - The Standard in Crypto as a Currency!
|
|
October 01, 2017, 03:18:02 PM |
|
Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive...
|
_///// [$XVG] ★★★★★WE ARE ON THE VERGE ★★★★★ [MULTI-ALGO] /////_
|
|
|
|
Dogedarkdev (OP)
Legendary
Offline
Activity: 1708
Merit: 1009
$XVG - The Standard in Crypto as a Currency!
|
|
October 01, 2017, 03:18:59 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf
|
_///// [$XVG] ★★★★★WE ARE ON THE VERGE ★★★★★ [MULTI-ALGO] /////_
|
|
|
|
senseless
|
|
October 01, 2017, 03:24:38 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf How is it possible for an unencrypted wallet to be locked? It's not. Yes, I'm setting the algo in the configuration file just as I did with 3 other coins I'm mining without any issues. It detects this setting just fine, getinfo() returns the correct PoW algo. It's obviously an issue with the coin. Even trying to manually submit a block fails with the same wallet locked error. I've started hacking out large portions of the code to see if I can get the SignBlock() function in main.cpp working properly. Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive... I'm running it in linux on an 8 core server with 16gb of memory. It's painful to try to figure out why I can't mine because any changes I make take an hour of waiting before I can test them. And, since testnet isn't working properly either.... I can't use testnet to test the changes. Also, I'm running 2.1.0. I've tried precompiled binaries and compiling from git source myself.
|
|
|
|
sparker327
Full Member
Offline
Activity: 462
Merit: 100
Parachute for sale. Used once. Small red stain.
|
|
October 01, 2017, 03:34:55 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf How is it possible for an unencrypted wallet to be locked? It's not. Yes, I'm setting the algo in the configuration file just as I did with 3 other coins I'm mining without any issues. It detects this setting just fine, getinfo() returns the correct PoW algo. It's obviously an issue with the coin. Even trying to manually submit a block fails with the same wallet locked error. I've started hacking out large portions of the code to see if I can get the SignBlock() function in main.cpp working properly. Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive... I'm running it in linux on an 8 core server with 16gb of memory. It's painful to try to figure out why I can't mine because any changes I make take an hour of waiting before I can test them. And, since testnet isn't working properly either.... I can't use testnet to test the changes. Also, I'm running 2.1.0. I've tried precompiled binaries and compiling from git source myself. Some wallets work better in win others on Linux. Mine is running spectacularly on windows. Splash screen stays up for 15 mins or so before wallet loads but that’s the only annoying issue. I’ve been doing this for years and when there is a wallet or mining issue it’s usually the persons OS, a diff software conflict, virus protection, ports not open or just missing something when they work with the wallet or mining .bat file. Especially if most other people don’t have issues with it. It helps when you post your .bat file and tell us what mining software your using and/or posting your .conf file so different sets of eyes can look at it. Just saying things don’t work without anyone seeing what your doing makes it difficult to troubleshoot.
|
|
|
|
Dogedarkdev (OP)
Legendary
Offline
Activity: 1708
Merit: 1009
$XVG - The Standard in Crypto as a Currency!
|
|
October 01, 2017, 03:42:49 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf How is it possible for an unencrypted wallet to be locked? It's not. Yes, I'm setting the algo in the configuration file just as I did with 3 other coins I'm mining without any issues. It detects this setting just fine, getinfo() returns the correct PoW algo. It's obviously an issue with the coin. Even trying to manually submit a block fails with the same wallet locked error. I've started hacking out large portions of the code to see if I can get the SignBlock() function in main.cpp working properly. Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive... I'm running it in linux on an 8 core server with 16gb of memory. It's painful to try to figure out why I can't mine because any changes I make take an hour of waiting before I can test them. And, since testnet isn't working properly either.... I can't use testnet to test the changes. Also, I'm running 2.1.0. I've tried precompiled binaries and compiling from git source myself. that's strange, considering that mining pools add verge almost every day, and they all run linux too. i also run a few flavors of linux and haven't had any issues. can you post some sort of debug log info? what happens if you try to dump a private key? does it say your wallet is locked?
|
_///// [$XVG] ★★★★★WE ARE ON THE VERGE ★★★★★ [MULTI-ALGO] /////_
|
|
|
|
senseless
|
|
October 01, 2017, 03:54:12 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf How is it possible for an unencrypted wallet to be locked? It's not. Yes, I'm setting the algo in the configuration file just as I did with 3 other coins I'm mining without any issues. It detects this setting just fine, getinfo() returns the correct PoW algo. It's obviously an issue with the coin. Even trying to manually submit a block fails with the same wallet locked error. I've started hacking out large portions of the code to see if I can get the SignBlock() function in main.cpp working properly. Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive... I'm running it in linux on an 8 core server with 16gb of memory. It's painful to try to figure out why I can't mine because any changes I make take an hour of waiting before I can test them. And, since testnet isn't working properly either.... I can't use testnet to test the changes. Also, I'm running 2.1.0. I've tried precompiled binaries and compiling from git source myself. Some wallets work better in win others on Linux. Mine is running spectacularly on windows. Splash screen stays up for 15 mins or so before wallet loads but that’s the only annoying issue. I’ve been doing this for years and when there is a wallet or mining issue it’s usually the persons OS, a diff software conflict, virus protection, ports not open or just missing something when they work with the wallet or mining .bat file. Especially if most other people don’t have issues with it. It helps when you post your .bat file and tell us what mining software your using and/or posting your .conf file so different sets of eyes can look at it. Just saying things don’t work without anyone seeing what your doing makes it difficult to troubleshoot. Thanks, I've been doing this since 2011 and have been a linux systems administrator professionally since 2001. It's an issue inside the code, specifically with the SignBlock function. Since the function serves no purpose other than to verify the pubkey exists in the wallet, I'm compiling now to ignore that code inside of submitblock(). I suspect this will work and I will be able to mine finally.. I just wish I had spent more time learning C. There are some things about the code I don't understand.
|
|
|
|
Dogedarkdev (OP)
Legendary
Offline
Activity: 1708
Merit: 1009
$XVG - The Standard in Crypto as a Currency!
|
|
October 01, 2017, 04:14:22 PM |
|
Does anyone have any idea how to unlock an UNencrypted wallet?
Trying to mine and getting the following errors on an UNencrypted wallet.
"Unable to sign block, wallet locked?"
it sounds like it's still locked. do you have the .conf properly set for mining? you have to use algo= in the .conf How is it possible for an unencrypted wallet to be locked? It's not. Yes, I'm setting the algo in the configuration file just as I did with 3 other coins I'm mining without any issues. It detects this setting just fine, getinfo() returns the correct PoW algo. It's obviously an issue with the coin. Even trying to manually submit a block fails with the same wallet locked error. I've started hacking out large portions of the code to see if I can get the SignBlock() function in main.cpp working properly. Why does it take an hour or more after starting the wallet before it becomes responsive?
Why does everyone in this thread (including the creators of the coin) only care about the price of the coin? (This question is rhetorical)
i've never once discussed the price, as a matter of fact, i've said many times i refuse to speculate. i've never seen the qt wallet take an hour or more. usually it takes about 10-15 minutes. if you are running the windows version, it can take a long time if you start clicking the splash screen until it becomes unresponsive... I'm running it in linux on an 8 core server with 16gb of memory. It's painful to try to figure out why I can't mine because any changes I make take an hour of waiting before I can test them. And, since testnet isn't working properly either.... I can't use testnet to test the changes. Also, I'm running 2.1.0. I've tried precompiled binaries and compiling from git source myself. Some wallets work better in win others on Linux. Mine is running spectacularly on windows. Splash screen stays up for 15 mins or so before wallet loads but that’s the only annoying issue. I’ve been doing this for years and when there is a wallet or mining issue it’s usually the persons OS, a diff software conflict, virus protection, ports not open or just missing something when they work with the wallet or mining .bat file. Especially if most other people don’t have issues with it. It helps when you post your .bat file and tell us what mining software your using and/or posting your .conf file so different sets of eyes can look at it. Just saying things don’t work without anyone seeing what your doing makes it difficult to troubleshoot. Thanks, I've been doing this since 2011 and have been a linux systems administrator professionally since 2001. It's an issue inside the code, specifically with the SignBlock function. Since the function serves no purpose other than to verify the pubkey exists in the wallet, I'm compiling now to ignore that code inside of submitblock(). I suspect this will work and I will be able to mine finally.. I just wish I had spent more time learning C. There are some things about the code I don't understand. not sure what kind of hashpower you have, but if you're mining to localhost, you're probably just getting orphan blocks, because unless you have a pretty serious farm, there is no way you are getting blocks solo mining on any of the 5 algorithms we offer...
|
_///// [$XVG] ★★★★★WE ARE ON THE VERGE ★★★★★ [MULTI-ALGO] /////_
|
|
|
|
senseless
|
|
October 01, 2017, 08:00:27 PM |
|
not sure what kind of hashpower you have, but if you're mining to localhost, you're probably just getting orphan blocks, because unless you have a pretty serious farm, there is no way you are getting blocks solo mining on any of the 5 algorithms we offer...
Is there anything helpful you can add? Or just calling me noob and thinking I don't know how to calculate hashrate. I have enough for more than 30% of one of the algos. Will you help me now? Or just more FUD? I got past the issue with the verification of the address so that it will attempt ProcessBlock(), getting the following error messages on block submission. ERROR: CheckBlock() : first tx is not coinbase ERROR: ProcessBlock() : CheckBlock FAILED Looks like this one is an issue with how my stratum server is putting together the submitblock data. Does anyone have any idea what settings to use with yiimp/yaamp stratum server? So far I've tried.. txmessage On and Off Setting "account" Setting "master_wallet" Hassubmitblock On Dunno, I'm at a loss on this one. Note: I'm not using the yiimp/yaamp front end, only the stratum server along with a manual configuration of the database entries for the coin properties. This works fine for DGB, XMY, and AUR. Mining all 3 of these coins and finding blocks without issues. The only problem has been with XVG.
|
|
|
|
HarryAnsour
Member
Offline
Activity: 134
Merit: 11
|
|
October 01, 2017, 08:42:48 PM |
|
XVG to the moon I hope soon. I love this coin , it's never overpriced, never had unnecessary pump, strong community, positive feedbacks.
Anyone knows how long it takes to show all Exchanges at Coinmarketcap?
|
|
|
|
Wolfie
|
|
October 01, 2017, 09:29:53 PM |
|
not sure what kind of hashpower you have, but if you're mining to localhost, you're probably just getting orphan blocks, because unless you have a pretty serious farm, there is no way you are getting blocks solo mining on any of the 5 algorithms we offer...
Is there anything helpful you can add? Or just calling me noob and thinking I don't know how to calculate hashrate. I have enough for more than 30% of one of the algos. Will you help me now? Or just more FUD? I got past the issue with the verification of the address so that it will attempt ProcessBlock(), getting the following error messages on block submission. ERROR: CheckBlock() : first tx is not coinbase ERROR: ProcessBlock() : CheckBlock FAILED Looks like this one is an issue with how my stratum server is putting together the submitblock data. Does anyone have any idea what settings to use with yiimp/yaamp stratum server? So far I've tried.. txmessage On and Off Setting "account" Setting "master_wallet" Hassubmitblock On Dunno, I'm at a loss on this one. Note: I'm not using the yiimp/yaamp front end, only the stratum server along with a manual configuration of the database entries for the coin properties. This works fine for DGB, XMY, and AUR. Mining all 3 of these coins and finding blocks without issues. The only problem has been with XVG. How about just running a linux ccminer (if u have nvidia) and start it like this with your wallet address instead: ccminer-x64 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u D5vcazm7y7yo4LFY1YZAZSf78V3K9PUH4u -p c=XVG that exact string in windows with CCminer 2.2.1 runs like a top. note that its a 6-coin wallet, to be paid in XVG you must specify the <-p c=XVG> Good luck!
|
@XVG_HypeMan
|
|
|
senseless
|
|
October 01, 2017, 09:53:34 PM Last edit: October 01, 2017, 10:03:40 PM by senseless |
|
How about just running a linux ccminer (if u have nvidia) and start it like this with your wallet address instead:
ccminer-x64 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u D5vcazm7y7yo4LFY1YZAZSf78V3K9PUH4u -p c=XVG
that exact string in windows with CCminer 2.2.1 runs like a top.
note that its a 6-coin wallet, to be paid in XVG you must specify the <-p c=XVG>
Good luck!
So I can give zpool 20% of the coins generated? You realize they're stealing from you, right? They're the worst of all the pools out there (they steal the most). I have enough hashpower that I can solo mine. I want to solo mine. Then I can be sure no one is stealing from me Pool servers for altcoins are the popular new method to steal from people. As far as I'm concerned, none of them can be trusted.
|
|
|
|
|
2bfree
|
|
October 02, 2017, 12:24:17 AM |
|
I think this is the biggest price increase I have seen in a while. I can't figure out what coused it.
|
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ >>FREE SEO AUDIT/WHITE LABEL MAKE MONEY!<<▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
|
|
|
winding-coils
Member
Offline
Activity: 168
Merit: 10
|
|
October 02, 2017, 01:52:58 AM |
|
I think this is the biggest price increase I have seen in a while. I can't figure out what coused it.
Binance is moments away from listing, other than that I don't know, HitBTC listed it... dunno still waiting on Wraith
|
|
|
|
nick1492
|
|
October 02, 2017, 02:48:08 AM |
|
Oh my, hitbtc has started on verge, what's next if it start on binance. Then what will happen when wraith is released, what what what next
|
|
|
|
hdn
|
|
October 02, 2017, 03:38:02 AM |
|
Oh my, hitbtc has started on verge, what's next if it start on binance. Then what will happen when wraith is released, what what what next next xvg price will increase and maybe passing 500 sat
|
|
|
|
coinsomnia
Member
Offline
Activity: 119
Merit: 10
|
|
October 02, 2017, 06:06:02 AM |
|
XVG to the moon I hope soon. I love this coin , it's never overpriced, never had unnecessary pump, strong community, positive feedbacks.
Anyone knows how long it takes to show all Exchanges at Coinmarketcap?
It's already showing it! A huge boost in trading volume! Trading in Etherium as well.
|
|
|
|
nick1492
|
|
October 02, 2017, 06:30:00 AM |
|
xvg is already 214 sats at binance!
|
|
|
|
Rijakolus
|
|
October 02, 2017, 07:42:07 AM |
|
I guess there is some problem withdrawing Vergre from bittrex? I am waiting sicne yesterday for bittrex to confirm... Its usually pretty fast...
|
|
|
|
|