Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[shadabahmed]

i installed this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i  install AMD ReLive also for mining

Did you run the pixel patcher, needed if gpu bios has been flashed (and maybe if using latest Blockchain drivers - I'm not sure).

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

"1.4.4: Added patch for BIOS signature check."

thanks alot bro its working...

[1715508964]

1715508964

[1715508964]

1715508964

[1715508964]

1715508964

[1715508964]

1715508964

[1715508964]

1715508964

[1715508964]

1715508964

[NavyCuda]

I don't know if it is specific to me, but I also have issues installing drivers in win10 for vega.  I get one driver installation, after that something always goes wrong and I have to reinstall windows.

Awesome it's not just me. I have the same issue's that I get 1 installed fine anything after that it's a 50/50 chance that the driver installs correctly for the other 9 Vega gpu's. I haven't tried another driver yet besides the Aug23 blockchain driver. Have you? Trying to compare notes to see what else to test to try and get them hashing. I've spent WAY to much time on get more that 1 Vega GPU working...

I'm running 2x Vega FE.  The public drivers I've run are Vega FE release drivers, Vega FE beta(public) and the aug. 23 block chain drivers. 

I got both cards up to 42.4Mh/s last night.  Windows updated and restarted the computer and I can't get them past 36mh/s now.  Very frustrating.

Windows update usually installs newest GPU drivers.  So just uninstall your drivers with DDU in safe mode, reinstall proper drivers, and disable windows update.

Windows update did not change the display drivers according to radeon control.

[B2555M]

Hello boys... Why i getting this error ?

"Received unknown response: {"id":null,"method":"mining.notify","params":["1695",
"0xe794400c315d44b7117b6f0e437046c97d0761906d51ef307b48c51fc1c9706d","0x6d29f6dd
1270e49744bd5377ec86395b2de2abbe54bae16281b8e39b35538dcd","0x0000000394427b08175
efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c",true]}"

Mining working ... i geting shares etc but i dont like this msg ... is red Its ok ? Or i need change smth ?

My "bat"

"ethdcrminer64 -mode 1 -epool stratum+tcp://exppool.servehttp.com:8010 -ewal 0x8eF5a92f03D34532e94C299f04e21601400591F9 -epsw x -eworker GTX1060 -allcoins 1 -esm 0"

I tried change esm to 1 or 2... nothing help
Ty for help

[th00ber]

Just receive my RX VEGA 56 (Thanks LDLC.com and the discount Sapphire RX VEGA 56 (405€) )


Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W

What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great

I'll try to improve that and test blockchain drivers etc ...

[thevictimofuktyranny]

Just receive my RX VEGA 56 (Thanks LDLC.com and the discount Sapphire RX VEGA 56 (405€) )


Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W

What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great

I'll try to improve that and test blockchain drivers etc ...

I tested it: was 205watts for 35.5mhs - at perfect share find times for 35.5mhs (-5% powertune and 930mhz HBM2, P6 and P7 states set 1030, fan 3600rpm)!

And -24% powertune was 31mhs at correct share found times for 31.5mhs at the pool - using 165watts.

PSU used is 90% efficiency, so actual power draw was 184.5watts for 35.5mhs and 148.5watts for 31mhs. I suppose, a more efficient PSU would help. LOL

May try Blockchain drivers, but apparently those are for RX 580s and RX 570s - so don't expect any improvement.

Over 950mhz and 980mhz HBM2 speed: correct shares were severely impaired from the pool (pretty crap) - unstable.

Not really good for mining, but excellent for PC gaming. Up to 18% faster than a GTX 1070 when PC gaming with the undervolt and overclock  

[th00ber]

Update. Vega 56
36MH/s 135W at wall (wattmeter)

-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%

https://imgur.com/a/VCXm7

[tf2addict]

I'm trying to diagnose a pool configuration problem with Awesome Miner and Mining Pool Hub.  Is there any way to log or view what the actual full command line is that was used to be launch Claymore?

[thevictimofuktyranny]

Update. Vega 56
36MH/s 135W at wall (wattmeter)

-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%

https://imgur.com/a/VCXm7

Setting the GPU core clocks to low impairs share find times!

May make you feel good to see 36mhs, but you won't be getting hashing rewards at that rate!

I guess, you'll need to run it for week to see whether you are getting what the calculator says you should be getting for 36mhs (minus fees).

I reckon it will be something much lower.

[Tony2020]

Hi,

Can someone please help me. Im a newbei to mining, however very interested. I just set my own mining rig of 6 Asus GeForce GTX 1080Ti ROG Strix OC 11264MB.

Don't know why I brought these but don't know if it was the write choice.

Im getting 36.06 mh/s per card. I tried to overclock it,

core mhz: 70
Memory mhm: 1000
power limit: 260
targeted temperature: 60
Minimum fan speed: 70

I dont know if these setting are correct, but it has increased the haste from 34 to 36, can someone please help me with this. Also I'm always getting low shares,

4 34.946 Mh/s, GPU5 34.945 Mh/s
ETH: 09/09/17-01:12:00 - SHARE FOUND - (GPU 0)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:12:08 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 209.746 Mh/s, Total Shares: 1370, Rejected: 0, Time: 03:37
ETH: GPU0 34.950 Mh/s, GPU1 34.949 Mh/s, GPU2 34.966 Mh/s, GPU3 34.955 Mh/s, GPU
4 34.953 Mh/s, GPU5 34.972 Mh/s
ETH: 09/09/17-01:12:09 - SHARE FOUND - (GPU 1)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:15 - SHARE FOUND - (GPU 1)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:12:15 - SHARE FOUND - (GPU 2)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:16 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 209.660 Mh/s, Total Shares: 1373, Rejected: 0, Time: 03:37
ETH: GPU0 34.968 Mh/s, GPU1 34.935 Mh/s, GPU2 34.940 Mh/s, GPU3 34.941 Mh/s, GPU
4 34.936 Mh/s, GPU5 34.941 Mh/s
GPU0 t=42C fan=75%, GPU1 t=52C fan=75%, GPU2 t=43C fan=75%, GPU3 t=44C fan=75%,
GPU4 t=40C fan=75%, GPU5 t=34C fan=75%
ETH: 09/09/17-01:12:23 - SHARE FOUND - (GPU 3)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:37 - SHARE FOUND - (GPU 4)
ETH: Share accepted (11 ms)!
GPU0 t=42C fan=75%, GPU1 t=52C fan=75%, GPU2 t=43C fan=75%, GPU3 t=45C fan=75%,
GPU4 t=40C fan=75%, GPU5 t=34C fan=75%
ETH: 09/09/17-01:12:52 - SHARE FOUND - (GPU 2)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:13:02 - SHARE FOUND - (GPU 5)
ETH: Share accepted (12 ms)!

Can someone please help me with this. I see others gets around 30 to 90. Why is this happening.

Thank you very much.

[Lontonbit]

I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists

not sure I understand what you did...maybe you just killed the pcie slot on the motherboard ?  try your GPU in another computer !

No. I plugged a PCIE riser 1x to 16x, the 1x connector in to a PCI slot (different than pci express) they do fit in there the same. When I powered on the pc, smoke started coming out of the pci slot so I pulled it out quickly but it was too late. The damage was done. Ive tried connecting it to a pcie slot on to different pc's and both are unable to recognize the graphic card. Either in device manager or amd driver download. Error 175 or 182 on amd code.

burned card can be replaced.. i did it 2 times

Can it be fixed? What do I need to do? Thnx

[nguyenphuong]

Hello everyone!
I'm a newbie. Sorry for my English. I have a question.

Which miner is more profit, Claymore's ZCash AMD GPU Miner or Claymore Dual Miner? I have 4 rigs (R9 270 and R7 370) is mining on Zcash.
I intend to change to Claymore Dual Miner but i dont know which miner is more profit.

Thanks for you help!

[DeepTerrfici]

Claymore 10 kept crashing on me. Switched back to previous version and its performing much better.

[Skol600ml]

Hi,

Can someone please help me. Im a newbei to mining, however very interested. I just set my own mining rig of 6 Asus GeForce GTX 1080Ti ROG Strix OC 11264MB.

Don't know why I brought these but don't know if it was the write choice.

Im getting 36.06 mh/s per card. I tried to overclock it,

core mhz: 70
Memory mhm: 1000
power limit: 260
targeted temperature: 60
Minimum fan speed: 70

I dont know if these setting are correct, but it has increased the haste from 34 to 36, can someone please help me with this. Also I'm always getting low shares,

4 34.946 Mh/s, GPU5 34.945 Mh/s
ETH: 09/09/17-01:12:00 - SHARE FOUND - (GPU 0)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:12:08 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 209.746 Mh/s, Total Shares: 1370, Rejected: 0, Time: 03:37
ETH: GPU0 34.950 Mh/s, GPU1 34.949 Mh/s, GPU2 34.966 Mh/s, GPU3 34.955 Mh/s, GPU
4 34.953 Mh/s, GPU5 34.972 Mh/s
ETH: 09/09/17-01:12:09 - SHARE FOUND - (GPU 1)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:15 - SHARE FOUND - (GPU 1)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:12:15 - SHARE FOUND - (GPU 2)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:16 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 209.660 Mh/s, Total Shares: 1373, Rejected: 0, Time: 03:37
ETH: GPU0 34.968 Mh/s, GPU1 34.935 Mh/s, GPU2 34.940 Mh/s, GPU3 34.941 Mh/s, GPU
4 34.936 Mh/s, GPU5 34.941 Mh/s
GPU0 t=42C fan=75%, GPU1 t=52C fan=75%, GPU2 t=43C fan=75%, GPU3 t=44C fan=75%,
GPU4 t=40C fan=75%, GPU5 t=34C fan=75%
ETH: 09/09/17-01:12:23 - SHARE FOUND - (GPU 3)
ETH: Share accepted (11 ms)!
ETH: 09/09/17-01:12:37 - SHARE FOUND - (GPU 4)
ETH: Share accepted (11 ms)!
GPU0 t=42C fan=75%, GPU1 t=52C fan=75%, GPU2 t=43C fan=75%, GPU3 t=45C fan=75%,
GPU4 t=40C fan=75%, GPU5 t=34C fan=75%
ETH: 09/09/17-01:12:52 - SHARE FOUND - (GPU 2)
ETH: Share accepted (12 ms)!
ETH: 09/09/17-01:13:02 - SHARE FOUND - (GPU 5)
ETH: Share accepted (12 ms)!

Can someone please help me with this. I see others gets around 30 to 90. Why is this happening.

Thank you very much.

AFAIK 36-37 is normal for 1080ti

Want know what is wrong? The coin. 1080 ti is amazing but not for Etherium or Dual mining. Don't put this shark to climb trees, mine a coin that it's good at like Zcash, Sigt, Lbry, Groestl or whatever

Try this topic:

https://bitcointalk.org/index.php?topic=1940567.1860

[Skol600ml]

I'm trying to diagnose a pool configuration problem with Awesome Miner and Mining Pool Hub.  Is there any way to log or view what the actual full command line is that was used to be launch Claymore?

On Awesome miner - Right click on miner -> View process detail

As far i remember, the diagnostics option shows as well

[NavyCuda]

Update. Vega 56
36MH/s 135W at wall (wattmeter)

-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%

https://imgur.com/a/VCXm7

Setting the GPU core clocks to low impairs share find times!

May make you feel good to see 36mhs, but you won't be getting hashing rewards at that rate!

I guess, you'll need to run it for week to see whether you are getting what the calculator says you should be getting for 36mhs (minus fees).

I reckon it will be something much lower.

I was averaging 2% stale shares with a core clock of 852Mhz with VegaFE.

[cdnminer]

Hi all,

I have done quite a lot of research but haven't found a resolution to this problem - hopefully someone can help me on this.

Mining rig:
3 x MSI RX 580 8 GB cards (not Armor/Sapphire etc) - has single 8 pin power connector, single fan, no BIOS switch
Windows 10
SSD with 4 GB RAM
Installed Claymore version 10 Dual miner - Ethereum mining running well and stable but issue is that I cannot get Decred to authorize

Getting:
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

Start.bat command:
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x31be6e3~~~~~~~~~~~~~~~~~98c6.miner2 -dpool dcr.suprnova.cc:3252 -dwal myloginname.miner1 -dpsw 2222 -allpools 1

Troubleshooting:
- I have changed the password for the worker to match Claymore (x, 2222, other) - unable to leave the password blank for the worker
- verified Suprnova login (though there is an "x" in the active column?)
- attempted both weblogin name as well as email address used for profile
- added port 3252 in Windows firewall for both incoming and outgoing connections
- added miner to router's DMZ
- tried with/without stratum+tcp
- attempted -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 as detailed on suprnova's website
- though I can't recall which other decred pools I used but all got the same error

Any assistance or suggestions would be greatly appreciated!!

Try to change "miner1" to your "worker name" and write "-dpsw x" command too.

Appreciations here (ETH) 0x57137Aecf8d11b60522d53eD2b0Baf0215FD0b61

Suprnova already has "miner1" as a worker name - and have tried -dpsw x and with specific password as well - no change

[thevictimofuktyranny]

Update. Vega 56
36MH/s 135W at wall (wattmeter)

-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%

https://imgur.com/a/VCXm7

Setting the GPU core clocks to low impairs share find times!

May make you feel good to see 36mhs, but you won't be getting hashing rewards at that rate!

I guess, you'll need to run it for week to see whether you are getting what the calculator says you should be getting for 36mhs (minus fees).

I reckon it will be something much lower.

I was averaging 2% stale shares with a core clock of 852Mhz with VegaFE.

Take a GTX 1070 as an example: Run it without touching the GPU clock; plus 500mhz on the memory and 65% on power slider.

That will be your baseline for successful solutions sent back to the pool.

Run it with minus 125mhz on the GPU core and plus 500mhz on the memory and 65% on power slider.

It will be 3% less successful at pool doing work and you will get 3% less shares, which equates to 3% less coin rewards.

[NumbNuts]

Hi all,

I have done quite a lot of research but haven't found a resolution to this problem - hopefully someone can help me on this.

Mining rig:
3 x MSI RX 580 8 GB cards (not Armor/Sapphire etc) - has single 8 pin power connector, single fan, no BIOS switch
Windows 10
SSD with 4 GB RAM
Installed Claymore version 10 Dual miner - Ethereum mining running well and stable but issue is that I cannot get Decred to authorize

Getting:
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

Start.bat command:
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x31be6e3~~~~~~~~~~~~~~~~~98c6.miner2 -dpool dcr.suprnova.cc:3252 -dwal myloginname.miner1 -dpsw 2222 -allpools 1

Troubleshooting:
- I have changed the password for the worker to match Claymore (x, 2222, other) - unable to leave the password blank for the worker
- verified Suprnova login (though there is an "x" in the active column?)
- attempted both weblogin name as well as email address used for profile
- added port 3252 in Windows firewall for both incoming and outgoing connections
- added miner to router's DMZ
- tried with/without stratum+tcp
- attempted -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 as detailed on suprnova's website
- though I can't recall which other decred pools I used but all got the same error

Any assistance or suggestions would be greatly appreciated!!

Try to change "miner1" to your "worker name" and write "-dpsw x" command too.

Appreciations here (ETH) 0x57137Aecf8d11b60522d53eD2b0Baf0215FD0b61

Suprnova already has "miner1" as a worker name - and have tried -dpsw x and with specific password as well - no change

The only real difference I can see when comparing it to my bat file is that I have  -epsw x before -dpool.  Not sure if it matters since that is for the Ethereum part, but may be worth a try adding it.

[Yohow]

Hi all,

I have done quite a lot of research but haven't found a resolution to this problem - hopefully someone can help me on this.

Mining rig:
3 x MSI RX 580 8 GB cards (not Armor/Sapphire etc) - has single 8 pin power connector, single fan, no BIOS switch
Windows 10
SSD with 4 GB RAM
Installed Claymore version 10 Dual miner - Ethereum mining running well and stable but issue is that I cannot get Decred to authorize

Getting:
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

Start.bat command:
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x31be6e3~~~~~~~~~~~~~~~~~98c6.miner2 -dpool dcr.suprnova.cc:3252 -dwal myloginname.miner1 -dpsw 2222 -allpools 1

Troubleshooting:
- I have changed the password for the worker to match Claymore (x, 2222, other) - unable to leave the password blank for the worker
- verified Suprnova login (though there is an "x" in the active column?)
- attempted both weblogin name as well as email address used for profile
- added port 3252 in Windows firewall for both incoming and outgoing connections
- added miner to router's DMZ
- tried with/without stratum+tcp
- attempted -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 as detailed on suprnova's website
- though I can't recall which other decred pools I used but all got the same error

Any assistance or suggestions would be greatly appreciated!!

Try to change "miner1" to your "worker name" and write "-dpsw x" command too.

Appreciations here (ETH) 0x57137Aecf8d11b60522d53eD2b0Baf0215FD0b61

Suprnova already has "miner1" as a worker name - and have tried -dpsw x and with specific password as well - no change

Okay but your worker real name is miner1? Or another? You should put the real worker name on start.bat and in supernova, however try to "update worker" on dcr.suprnova.cc account settings and keep the "-dpsw x" command. Of course you must write the "-epsw x" command before "-dpool" command on start.bat

[cdnminer]

Hi all,

I have done quite a lot of research but haven't found a resolution to this problem - hopefully someone can help me on this.

Mining rig:
3 x MSI RX 580 8 GB cards (not Armor/Sapphire etc) - has single 8 pin power connector, single fan, no BIOS switch
Windows 10
SSD with 4 GB RAM
Installed Claymore version 10 Dual miner - Ethereum mining running well and stable but issue is that I cannot get Decred to authorize

Getting:
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

Start.bat command:
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x31be6e3~~~~~~~~~~~~~~~~~98c6.miner2 -dpool dcr.suprnova.cc:3252 -dwal myloginname.miner1 -dpsw 2222 -allpools 1

Troubleshooting:
- I have changed the password for the worker to match Claymore (x, 2222, other) - unable to leave the password blank for the worker
- verified Suprnova login (though there is an "x" in the active column?)
- attempted both weblogin name as well as email address used for profile
- added port 3252 in Windows firewall for both incoming and outgoing connections
- added miner to router's DMZ
- tried with/without stratum+tcp
- attempted -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 as detailed on suprnova's website
- though I can't recall which other decred pools I used but all got the same error

Any assistance or suggestions would be greatly appreciated!!

Try to change "miner1" to your "worker name" and write "-dpsw x" command too.

Appreciations here (ETH) 0x57137Aecf8d11b60522d53eD2b0Baf0215FD0b61

Suprnova already has "miner1" as a worker name - and have tried -dpsw x and with specific password as well - no change

Okay but your worker real name is miner1? Or another? You should put the real worker name on start.bat and in supernova, however try to "update worker" on dcr.suprnova.cc account settings and keep the "-dpsw x" command. Of course you must write the "-epsw x" command before "-dpool" command on start.bat

No dice.

Here is the updated start.bat:

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x31be6e3~~~~~~~~~8998c6.miner2 -epsw x -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal webloginname.worker1 -dpsw x -allpools 1

My "webloginname" of course matches the username I use for Suprnova and although I previously used Miner1 as my worker name, I changed to worker1/worker2 (intend to run both rigs) but still running into same error as in original post.

What's especially frustrating is that is says that I'm connected to Suprnova but then the pool disconnects me.  Is there anything within Suprnova I need to do other than register an account and create a worker? There is an "x" in the Active column when looking at my configured workers - or is this just a reflection that they're not connecting?

Note - I tried this on another rig - same issues.