Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[ethernaly]

Just leaving feedback here on the version 10.0

Using 5x RX580 and the amd blockchain driver from 23rd august, it's now possible to parcially control the voltage.

I had my voltage set at 0.875v but the driver ignores and it sets 0.912 as the minimum. If I set 0.800, it still selects 0.912v.
So this means that I have an increase in power consuption. My 5 gpu rig now uses 120w more power.

So, if you have this 0.912v limit as I have, don't use a low core clock because with 0.912 you can do near 1300mhz stable (rx 580 sapphire pulse)
With that extra core speed, make sure that you increase the DCRI value so that the second coin uses the full extra MHz for maximum efficiency.

Before: ETH 144MHs DCR 4700MHs (at 1200mhz 0.875v) +/- 840w
Now:    ETH 150MHs DCR 5750MHs (at 1300mhz 0.912v) +/- 960w

Because I pay 0.17€/kW, it's almost not worth the extra speed vs power consuption.

Please reply if you also can't set the voltage any lower than 0.9v

Hi, I'm going to setup a similar RIG, can I contact you through private messages about your RIG? (I'm going to mix 5xRX580 Nitro+ 8GB + Ryzen 1700x)

[RuMiner]

Anyone else experiencing this. Just in the last hour or so all of my Decred coin shares are getting rejected on both my rigs where before they were not. I am mining on dcr.suprnova.cc

i switched over to Lbry coin as dual for now no rejects, so cannot figure out why all of a sudden every single share on 2 rigs 9 gpus are getting rejected for DCR

I have 3 rigs in dual, DCR on the same pool. 2 rigs reject all shares, 1 rig goes well. I guess something is broken on suprnova...

[kr3st]

I tried to find the answer myself, but couldn't seem to track it down.

Can I now use my Vega64 to mine with claymore on ethOS?

[Tharbo]

I can't mine on dwarfpool. It gives me http error #52 in Claymore v10 and this is the second pool I attempt to use this software

I have literally put alike a video and it just doesn't work, no matter which region I choose ( EU, US etc ). Any ideas?

[Tharbo]

I can't mine on dwarfpool. It gives me http error #52 in Claymore v10 and this is the second pool I attempt to use this software

I have literally put alike a video and it just doesn't work, no matter which region I choose ( EU, US etc ). Any ideas?

I have no problem with eth-hk.dwarfpool.com & v10.0.

Now, I am testing to cheat the devfee!

I guess I will give it a try, I don't know why I just can't mine ethereum on good servers. coinmine.pl worked for me but they pay like really really slow to the point it was a waste of time and electric bill but other pools I tried for some reason give me that error

Edit:
Same error.
Here is a picture if anyone can help me:https://imgur.com/nF5C5fM
Edit 2:
Managed to get it to work now, but I am getting dag error which I am sure I saw tutorial somewhere, I guess I will finally mine ethereum today
Edit 3:
Fixed dag error too and now there is this error: https://imgur.com/9X5NsTJ
Edit 4:
removing the line " -esm 1" fixed it and now I can mine normally, I hope my wall text of errors and trial help someone in the future

[Harry5555]

When is the 4.4 Afterburner coming out?  

I don't think there is any official date yet, It's still in beta. Currently beta 16.

[preda]

i am trying this 10 version with my 4x 480 rigs and gonna try eth+lbc if the speed is improved. thanks!!!!

[CrayjeksAjek]

Anybody know if this means blockchain drivers work with Claymore 10 in Win 7 now?

Use the robinhood driver is you have Windows 7!

[CrayjeksAjek]

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

4 Rx 480 8gb (xfx ref, 2 xfx hard swap, powercolor ref) getting a total of 117mh/s eth + 257mh/s lbry
This is my bat file

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x7CB5eA7Dc754Da82B49b4E8ac06639b5AB4c4797.Ajek -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal carbonjawed.1 -dpsw x -dcoin lbry -dcri 19 -esm -gser2 -eres -estale

[SummersideGuy]

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

4 Rx 480 8gb (xfx ref, 2 xfx hard swap, powercolor ref) getting a total of 117mh/s eth + 257mh/s lbry
This is my bat file

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x7CB5eA7Dc754Da82B49b4E8ac06639b5AB4c4797.Ajek -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal carbonjawed.1 -dpsw x -dcoin lbry -dcri 19 -esm -gser2 -eres -estale

RX 560 - 13 Eth 34 LBR  
RX 570 - 28.6 Eth 74 LBR
RX 580 - 29.4 Eth 79 LBR

I decided to answer my own question

[justinjja]

When I try to set voltages with -cvddc I get constant errors:
Failed to set new effective core clock for GPU #0-5 (17.7.2)

Running W10
August23 blockchain drivers + Pixel Patcher
Claymore 10
Reference RX480's

Is there another step needed to get voltage control working?

[CrayjeksAjek]

When I try to set voltages with -cvddc I get constant errors:
Failed to set new effective core clock for GPU #0-5 (17.7.2)

Running W10
August23 blockchain drivers + Pixel Patcher
Claymore 10
Reference RX480's

Is there another step needed to get voltage control working?

Use afterburner 4.4.0 beta 16 although Ive heard beta 12 and beta 15 work just as well

[Skol600ml]

4x 580 8GB
Win10 64
Clay 10
Blockchain Drive



GTX 1070

[rinzlerus]

When I mining ETH only I get 120-140 shares per hour on nanopool with 178MH/s.
But when I turn on dual mining (Claymore's 10) with 176MH/s on ETH and 4050MH/s on DCR, I get only 110-120 shares/hour on ETH.
Is that normal?

rig: 6*rx570.

[linwzj]

please update Claymore CryptoNote GPU Miner of Monero.It's a long time from last update.Besides,I guess mining Monero will get more money than mining ethereum at next year.
The most important is add dual mining function if it is possible.Thanks at first.

[killerelite]

What are the hashrates of nvidia cards , any improvements there ?

[bulgar73]

is there any "autotune" function or software for search best -dcri value or only manual search one by one card ?


thnx

----
BTC
 

[boolee4web]

I have problem,  work on rig, test one card asus turbo gtx 1070 8gb on my pc ... in Claymore dual show me next hashrate :

ETH: 09/03/17-09:13:47 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 30.244 Mh/s, Total Shares: 144, Rejected: 0, Time: 06:32
ETH: GPU0 off, GPU1 30.244 Mh/s
 DCR - Total Speed: 302.442 Mh/s, Total Shares: 1354, Rejected: 18
 DCR: GPU0 off, GPU1 302.442 Mh/s
ETH: 09/03/17-09:13:50 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 30.092 Mh/s, Total Shares: 144, Rejected: 0, Time: 06:32
ETH: GPU0 off, GPU1 30.092 Mh/s
 DCR - Total Speed: 300.915 Mh/s, Total Shares: 1354, Rejected: 18
 DCR: GPU0 off, GPU1 300.915 Mh/s

but on supernova acc show diferent for ETH ...

Worker                      Hashrate                           Difficulty
boolee4web.comp1     23,860.93                       256

DCR ...

Worker                      Hashrate                            Difficulty
boolee4web.comp1   229,064.92                               1


My command line on Claymore ...

ethdcrminer64.exe -epool eth.suprnova.cc:5000 -ewal boolee4web.comp1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal boolee4web.comp1 -dpsw x -allpools 1

Why different hashrate, please help me ..

[mindrunner]

Hi,

API.txt does not seem to be bundled in any of the releases anymore. 
Is that a mistake or intentional?

[syraka76]

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

4 Rx 480 8gb (xfx ref, 2 xfx hard swap, powercolor ref) getting a total of 117mh/s eth + 257mh/s lbry
This is my bat file

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x7CB5eA7Dc754Da82B49b4E8ac06639b5AB4c4797.Ajek -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal carbonjawed.1 -dpsw x -dcoin lbry -dcri 19 -esm -gser2 -eres -estale

RX 560 - 13 Eth 34 LBR  
RX 570 - 28.6 Eth 74 LBR
RX 580 - 29.4 Eth 79 LBR

I decided to answer my own question

how do you reach 28 mhs on rx 570?

i have rx 570 8gb sapphire nitro + with bios mod, i've tried all timing, but i do not know how to do, the max i can reach and 25 mhs. give me a tip