Bitcoin Forum
December 14, 2024, 01:13:19 AM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 [847] 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 ... 1411 »
  Print  
Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6590798 times)
MentalNomad
Member
**
Offline Offline

Activity: 83
Merit: 10


View Profile
October 16, 2017, 08:01:21 PM
 #16921

Your miners work ok after fork?

Actually difficulty on Eth has dropped drastically. I'm noticing my profits go up by the hour here. This is awesome news for us miners. Anyone else notice?

Difficulty dropped, making block time shorter. So, more blocks.

Reward also dropped, so, less revenue per block.

Net result is almost no difference in mining profitability - as intended in the upgrade.
TunerDude007
Sr. Member
****
Offline Offline

Activity: 467
Merit: 252


View Profile
October 16, 2017, 08:12:11 PM
 #16922

Your miners work ok after fork?

Actually difficulty on Eth has dropped drastically. I'm noticing my profits go up by the hour here. This is awesome news for us miners. Anyone else notice?

Difficulty dropped, making block time shorter. So, more blocks.

Reward also dropped, so, less revenue per block.

Net result is almost no difference in mining profitability - as intended in the upgrade.

Correct I hear ya, but unless Ethermine's stats are off, it's telling me I'm making more.....Time will tell I guess.
Justiciero
Member
**
Offline Offline

Activity: 88
Merit: 10


View Profile
October 16, 2017, 09:55:08 PM
 #16923

Hello

I was mining Zcash but now I've gone to ETH, I ask that it is better to mine ETH alone or with SIA or DECRED?

I use 4 * GTX 1060 + 1 GTX 1070

Thank you
icallpurps
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
October 16, 2017, 10:25:13 PM
 #16924

use whattomine.com and use the ETH+x up top and type in your numbers to see
icallpurps
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
October 16, 2017, 10:26:42 PM
 #16925

Error using Claymore v10 on Windows 10 after Creators update (windows version 1703)

Error when launching: The application was unable to start correctly (0xc000007b).

I've tried reinstalling nvidia drivers, .net 2012 (x64 and x86 and deleting msvcr110.dll and msvcp110.dll) from system32 and reinstalled .net. I've added exclusions to Defender and tried running as Admin.
Any suggestions would be appreciated. Thank you
Yohow
Member
**
Offline Offline

Activity: 66
Merit: 10


View Profile
October 16, 2017, 11:31:11 PM
 #16926

Hello

I was mining Zcash but now I've gone to ETH, I ask that it is better to mine ETH alone or with SIA or DECRED?

I use 4 * GTX 1060 + 1 GTX 1070

Thank you

In my case ETH+DCR
JustCauseBIH
Member
**
Offline Offline

Activity: 91
Merit: 10


View Profile
October 17, 2017, 06:51:04 AM
 #16927

Your miners work ok after fork?

Actually difficulty on Eth has dropped drastically. I'm noticing my profits go up by the hour here. This is awesome news for us miners. Anyone else notice?

Difficulty dropped, making block time shorter. So, more blocks.

Reward also dropped, so, less revenue per block.

Net result is almost no difference in mining profitability - as intended in the upgrade.

You got it wrong sir Smiley
dollos
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
October 17, 2017, 06:52:09 AM
 #16928

hi dude


1. uninstall afterburner
2. ddu through safe mode
3. install blockchain beta drivers from amd site
4. Download afterburner beta 16 , uninstall the current afterburner and install beta 16 to another folder just to be sure.
5. restart
6. use claymore v10 with    -di 012 only
then another batch file with -di 345
then another batch file with -di 67

try and lemme know what happens

PS this problem you are having is also prob something to do with what i have been complaining in this thread....

hope you come right.





Guys

Need some help

I have one rig thats driving me nuts

8 x Gigabyte Aorus 4gb Rx570's some with ELPIDA and some with Hynix
Asus z270-a
g4400
ddr 8gb
windows 10 fresh install
Blockchain drivers

My biggest issue is that when i make changes to the batch file the computer freezes..i get the blue screen with an error "Thread stuck in Device Driver"

I have swapped out motherboard with a new one...added more power...re installed windows several times....did clean DDU driver uninstalls several times etc...ONLY after i make a change and reboot it it MIGHT start hashing correctly....by correctly i mean it will always hash but at the stock clocks. I then need to resstart Claymore several times until it gets the overclocks.

I normally use the claymore batch file for all of my overclocks and undervolts...so i have tried several versions of MSI AB and its the same thing....

Am i doing something wrong ir is it these particular cards ? I even changed to Claymore 9.8 but that lowers the hash every so often to 14mh acroos all the cards ?


Also Compared to my other rigs this one is using a lot of electricity over 150w per card

I have used Polaris Editor 1.62 to change timings

Im at my wits end and can use some help if someone has run into these issues before

Thanks in advance
digibum
Newbie
*
Offline Offline

Activity: 11
Merit: 0


View Profile
October 17, 2017, 07:42:15 AM
 #16929

Your miners work ok after fork?

Actually difficulty on Eth has dropped drastically. I'm noticing my profits go up by the hour here. This is awesome news for us miners. Anyone else notice?

Difficulty dropped, making block time shorter. So, more blocks.

Reward also dropped, so, less revenue per block.

Net result is almost no difference in mining profitability - as intended in the upgrade.

You got it wrong sir Smiley

Why is that? Explain please  Grin
doodleza
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
October 17, 2017, 08:29:44 AM
 #16930

I have been mining 207.2 for weeks, after driver fix and I have tuned all settings well, and my miner was very stable until now.. I just opened anydesk (remote desktop) and meanwhile GPUs hanged and miner was restarted after all, overall hash rate dropped down to 175, each GPU 25.2 hashrate, what is the problem? RX 580 8gb x7
Kumic
Full Member
***
Offline Offline

Activity: 533
Merit: 100



View Profile
October 17, 2017, 08:36:56 AM
 #16931

I have 2 issues with Claymore 10.0 (Win10, blockchain drivers, 6card rigs running 570 and 470 cards)

1) After initial rig start (i.e. after powering or resetting the whole rig) Claymore 10.0 runs with lower hashrates (for example about 23-25Mhs with 470/570 cards). After stoping the miner and re-run .bat, I getting normal rates (i.e. miner has to be restarted and operates as expected only after 2nd run, never from the first)

2) Unpredictable hashrate drop during mining for some cards in rig (usually 1 or 2 of them). Rate drops and keeps at 23-25. The only solution I found is to restart Claymore.


Any comments guys?



Same issue here...as mentioned 470's and 570's
Has anyone found a fix for this ?
I have as instructed tried the timeout and it does not work
Thanks in advance


Are you talking about problem numbered 1 or numbered 2?
As to No.1 I was discussing with few people and they have similar problems, not solved. I am not worry too much as it happens only at first start.
But No.2 really makes me headache, because unpredictable.

I am having a # 1 issue....but

on #2 add if using the .bat file --tt 70 --fanmin 50

the reason is that the cards are throttling down due to temp

see if that helps



Put these in the config file:

-r 0
-minspeed <total expected hash rate>

by using those commands, miner will restart if it cannot reach X hashrate in 5 minutes.
this is tried and tested as per my experience.


Friends and my MSI 570 with Hynix chips are snaping today like crazy.
We use Claymore 10.0, AB 4.4.0. beta 16, Driver 9.14.10.01293. Crismon BETA
Until today everything was ok.
What's happening?

We tried to push fans more in order to drop temperatures on cards and it worked. I think critical temp. is near 60C, which is stupid. Is there any other solution for this?

P00P135
Full Member
***
Offline Offline

Activity: 1125
Merit: 136


View Profile
October 17, 2017, 09:04:04 AM
 #16932

Have you tried the block chain drivers?
Kumic
Full Member
***
Offline Offline

Activity: 533
Merit: 100



View Profile
October 17, 2017, 09:05:02 AM
 #16933

For me the hangs and miner restarts was because undervolting too much gigabyte gamings. 850 for memory not liked, back to 900 seems better. less or no opencl hanged. not problems from driver or claymore, i think.

For those who experience OPENCL hang - guys, i recommend you to try lowering you cards temps. However this is kinda tricky with some cards. I will explain below

For my Gigabyte rx580 g1 4gb i experienced same problems - no overclocking at startup sometimes (also - try to delete afterburner profiles for this cards and apply overclocking via Claymore) and after 4-8 hrs mining - opencl error, claymore restart or system hang - especially day time when it gets warmer - so all hangups i got at day time.

The thing is - the card was undervolted and overclocked - no HWinfo errors or something, doing 29.5 mhs ETH and 64 LBC in dual mode, but still this error with opencl.
Then i checked the average temp during mining - it was about 73-75 degrees which is pretty high as i assumed. I have installed the 120-120 fan for additional cooling - but the RX580 series uses some smartass cooler management - so basically the card just lowered down it's fans RPM, keeping the same temp - about 73 degrees.

After some research - i have decided to go risky way and modify BIOS as no other means of controlling fan-temps  worked for me - even claymore temperature control was causing system hangs.

I have used SRBPOLARIS editor to make changes to GPU "Target temperature" settings - i have put 68 degrees here and flashed card. (No other fan settings affected the fan behavior)

After that, the card works perfectly fine for more than 72 hrs .

I think the card was heating up way too much due to Gigabyte ineffective cooling and stock fan settings  - especially memory chips, what caused driver reboot and overclocking reset.

For those who need help with this mod - contact me, also i can help with memshift mod.

My friend and I lovered temperatures with fans on MSI 570 (Hynix) and it worked. But I rather do something about it, because holding temps under 60C is not a long term solution.

doodleza
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
October 17, 2017, 09:11:07 AM
 #16934

Have you tried the block chain drivers?

I have been using blockchain drivers and still got an issue but I fixed it.. just removed with DDU and then reinstalled the same driver and wuala it went back to 207.2 mhs/s
tondalink
Member
**
Offline Offline

Activity: 84
Merit: 10


View Profile
October 17, 2017, 09:12:04 AM
 #16935

This is the lastest version or still 9.8?
Kumic
Full Member
***
Offline Offline

Activity: 533
Merit: 100



View Profile
October 17, 2017, 09:19:16 AM
 #16936

Have you tried the block chain drivers?

I have been using blockchain drivers and still got an issue but I fixed it.. just removed with DDU and then reinstalled the same driver and wuala it went back to 207.2 mhs/s

Blockchain drivers I have tried to use when they came out, but I switched back. I am currently using driver Version 22.19.659.1 (Device Manager).

@ doodleza reinstaling same driver worked?  Nice. What cards do you have?


HYPEREGO
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile
October 17, 2017, 01:32:05 PM
 #16937

I would like to say thanks to the dev for the nice job they've done and are going to do!  Wink
Saphire
Full Member
***
Offline Offline

Activity: 602
Merit: 114


View Profile
October 17, 2017, 01:36:58 PM
 #16938

Your miners work ok after fork?

Actually difficulty on Eth has dropped drastically. I'm noticing my profits go up by the hour here. This is awesome news for us miners. Anyone else notice?

It was the same for me too before 10 hours but the profit dropped almost 50% instantly? Is it the same for you too?
gusknure
Newbie
*
Offline Offline

Activity: 40
Merit: 0


View Profile
October 17, 2017, 01:56:58 PM
 #16939

 same for me!
nothing changed!
why this happened?
Saphire
Full Member
***
Offline Offline

Activity: 602
Merit: 114


View Profile
October 17, 2017, 02:23:49 PM
 #16940

dramatically the Avarage hashrate is low.
Pages: « 1 ... 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 [847] 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 ... 1411 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!