Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Vannybest]

Inside the EthDcrMiner64.exe there is the admin password request there is no version without that?

[numeratrix]

Any idea why the miner would be causing an insane amount of mouse lag since that last Win10 update? I reinstalled the mouse drivers and it's definitely the miner.

Edit: When I stop mining on the GTX 1070 the RX 480s are lag free. It may be the last Nvidia driver...

[rodney2250]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

[bossbamboo]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

[jackbox]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

Cheapest celeron available for your socket. 2GB RAM. Yes can mix cards.

[Marvell2]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

No all Rx570 and 470 mix , no nividia cards

[serendipity969]

My configurations is : one Rx Sapphire 570 nitro+ OC mod with 1700 bios and blockchain AMD driver. mclock 2200 cclock 1340 ( default) 28MH/s (max ) on eth.

I wrote on claymore's bat configuration -cclock 1400 the computer freeze and just with reset is rebooting. If i try to change this value with MSI AB is steel remain the default value 1340. With AMD drivers 23.20.782.0 ( 2.010.2017) is possible to change the gpu freq up to 1600 with MSI AB and the changes are semnificative ( 2-3 MH/s ). How can i force this flag with command line on claymore start.bat ? It work on someone the -cclock settings?


And one more question : what is the role of the bios silent shitch ?


Thx.

[Ursul0]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

No all Rx570 and 470 mix , no nividia cards

Are you saying actually that you're running 10 AMD cards on WinX with "amd latest driver" - is this correct?
And if so what rates are you getting on ethash with this driver?

[perazdera]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

[smparo]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

Works with AMD Blockchain driver as well as with new one.
Procedure:
1) clean you system with DDU and reboot
2) install new driver and don't reboot
3) run utility Thread-AMD-ATI-Pixel-Clock-Patcher
4) and then restart the system

[leonix007]

Inside the EthDcrMiner64.exe there is the admin password request there is no version without that?

It is an executable file that needs a user admin privilege, just ensure the windows user profile account belongs to administrator groups

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

patcher is needed when you mod your GPU bios. otherwise, you don't need it.

[perazdera]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

Works with AMD Blockchain driver as well as with new one.
Procedure:
1) clean you system with DDU and reboot
2) install new driver and don't reboot
3) run utility Thread-AMD-ATI-Pixel-Clock-Patcher
4) and then restart the system

Thank you. I will try this today when I get home. One more question. Because i did not modded cards myself, I bought them like that from some guy, is there some way that I can find out what is factory settings for my cards?

[Claymore]

v10.1:

- now if miner has to recreate DAG for devfee, new DAG generation time will be included in devfee time.
- improved "-gser" option, now you can set custom delay between DAG generation on GPUs, check Readme for details.
- added detailed stats about rejected shares per GPU ("s" key).
- added "-logsmaxsize" option.
- fixed issues with "-r -1" option value.
- EthMan: added detailed stats mode in web server.
- a few minor bug fixes and improvements.

[dwdhu]

Hi,
please submit the updated new hashrates to gpustats.com
https://gpustats.com

[fr4nkthetank]

@Claymore, thanks for the new version, will test it out.  A friendly word of advice ?  The file name on the folder/rar is wayyyyyyyyyyy too long   Just saying

[forato]

v10.1:

- now if miner has to recreate DAG for devfee, new DAG generation time will be included in devfee time.
- improved "-gser" option, now you can set custom delay between DAG generation on GPUs, check Readme for details.
- added detailed stats about rejected shares per GPU ("s" key).
- added "-logsmaxsize" option.
- fixed issues with "-r -1" option value.
- EthMan: added detailed stats mode in web server.
- a few minor bug fixes and improvements.

@Claymore

Can you update ETHMAN in a way that he can control diferent miners (EX: 1 miner mine ETH other one ZCASH)

[heavyarms1912]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

Works with AMD Blockchain driver as well as with new one.
Procedure:
1) clean you system with DDU and reboot
2) install new driver and don't reboot
3) run utility Thread-AMD-ATI-Pixel-Clock-Patcher
4) and then restart the system

Thank you. I will try this today when I get home. One more question. Because i did not modded cards myself, I bought them like that from some guy, is there some way that I can find out what is factory settings for my cards?

You can find the memory type by reading from the BIOS.  Save the bios using atiflash and read it off from Polaris Bios Editor.  That would indicate the memory you have on the GPU.  You can google for the original BIOS for that brand, particular model and memory.

[cdrx]

v10.0 (Windows Pro) blockchain driver 23 aug.

I have 6 AMD cards and thought yesterday to add -platform 1  in miner. I noticed after few hours that miner just froze.
Then the second time it closed! and also closed even afterburner... Is it possible is it related to -platform ? Windows seems not to be updated or driver changed....

Never had issues before and now I removed -platform 1 + QuickEdit Mode and Insert Mod unchecked in cmd = seems ok... ? Happened to anyone ? No problem for 3 months before.

What could it be ?

[blevotron]

i wonder if gpustats could be integrated with claymore miner, so we have really good statiostics about which models what can achieve... probably it is possible

[perazdera]

So i need to to set bios to factory so that it can pass signature check?

You need to patch the video drivers. Get the bios signature patcher here: https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Just to check if I understand it correctly. I need to install driver then patch the driver with signature patcher from that link. Does that patcher work for every driver? Mainly I want to get AMD Blockchain Workloads driver to work.

Works with AMD Blockchain driver as well as with new one.
Procedure:
1) clean you system with DDU and reboot
2) install new driver and don't reboot
3) run utility Thread-AMD-ATI-Pixel-Clock-Patcher
4) and then restart the system

Thank you. I will try this today when I get home. One more question. Because i did not modded cards myself, I bought them like that from some guy, is there some way that I can find out what is factory settings for my cards?

You can find the memory type by reading from the BIOS.  Save the bios using atiflash and read it off from Polaris Bios Editor.  That would indicate the memory you have on the GPU.  You can google for the original BIOS for that brand, particular model and memory.

Thank you guys allot, you are the best Smiley Smiley I hope I will menage to try every suggestion today, if not I will definitely try it over the weekend and get back to you for the results.