jt00
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 09:26:29 PM |
|
is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks
I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's. What is your hash rate on decred while dual mining?
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 09:49:44 PM |
|
I have some MSI R9 390s, they are running fine mining ETH but they use too much power, 300 W plus mining solo at 32.5 Mhs, 380 Watts mining dual ETH+DCR, is there any bios mod out there to kind of control the power usage? mind you my 7 card rig is using 20 amps solo 25 amps dual, will be working 220 volts next week but even then I would like to fond out of any mods for those cards. Thanks
|
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4269
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 11:14:59 PM |
|
Does this software really works on linux?
i installed it on Ubuntu 16.04 with 16.40 amdgpupro driver, run with -etha 2 or without with -mode 1. card starts fine, then quits in two -three minutes.
Q: 1. Do i need ADL SDK or not? If yes, v. 8, 9 or 10? 2. Do I need AMD-APP-SDK as well? If yes, 2.9 or 3.0?
Thanks.
|
|
|
|
Dowper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 12:17:40 AM |
|
Hello people and good to be here.
I am new in mining but old in PC world. Recently I bought my first rig to get hobby.
I’m currently running:
MB – AsRock H81 PRO BTC v2 CPU – Intel Celeron G1840 RAM – Patriot 4GB @ 1600 SSD – SiliconPower 120GB PSU – 2 x ThermalTake 730W GPU - 6 x Sapphire NITRO+ RX 480 8GB – (11260-07-20G) - STOCK BIOS/ no OC PCI – 6 x Resizers x16 to x1 (USB)
So I set it up and am running Windows 10 and Claymore Dual miner v7.4.
PROBLEM:
After 5-10 minutes of running in ether single or dual mode I would get: WATCHDOG: GPU (x) hangs in OpenCL call. Miner will “restart” and will not start again.
TRIED SO FAR:
- Reinstalling Windows 10 - Running both single or dual mining - Running on stock drivers then 16.9.1 all the way to latest - Removing one or more cards - Switching PSU to run one to four cards and back and forth - Switching resizers - Running cards in both “OC” and silent mode (bios switch) - Virtual Memory set to 16GB+
I think a listed all. So is there any solution to this issue since I’m pretty out of them right now.
The only solution I found is, when I have this problem I reduce the OC of the GPU that is hanging or reduce the intensity of this GPU. It's annoying but I haven't found better solution to this problem. is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks
Sapphire RX470 Nitro+ 8GB - ~125W ETH/EXP mining, ~155W ETH+DCR mining. But dual mining DCR now is profitable and it's worth mining it.
|
|
|
|
galixxx
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 06:29:23 AM |
|
is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks
I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's. What is your hash rate on decred while dual mining? Around 430MH/s
|
|
|
|
xuanmichael
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 07:16:02 AM |
|
is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks
I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's. setup your catalyst ? thank you!
|
|
|
|
galixxx
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 10:00:04 AM |
|
is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks
I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's. setup your catalyst ? thank you! what exactly do you mean with your question? Sorry!
|
|
|
|
matmator
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 487
Merit: 252
bou !
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 11:02:23 AM |
|
Hello On my pc I have 3gpu, Is it possible to choose gpu with claymore? For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3 ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
go to the moon !!
|
|
|
gennadiv
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 11:44:06 AM |
|
I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet r 9 380 : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44% ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 12:01:02 PM |
|
I have some MSI R9 390s, they are running fine mining ETH but they use too much power, 300 W plus mining solo at 32.5 Mhs, 380 Watts mining dual ETH+DCR, is there any bios mod out there to kind of control the power usage? mind you my 7 card rig is using 20 amps solo 25 amps dual, will be working 220 volts next week but even then I would like to fond out of any mods for those cards. Thanks
Using Afterburner, you should use -100mV, 1040 core and 1500 memory, that will give you decent speed and save a few amps. The 390s are very good and dependable cards esp the MSI ones, but they are known powerhogs.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 01:19:49 PM |
|
I'm using Core Voltage 0, Power limit +20, Core Clock 1140, Memory 1500 that gives me 32.5 MHs, will try your set up to see what it gives, but I was looking at maybe some bios mod so not to lose too many MHs
|
|
|
|
Dowper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 01:21:59 PM |
|
Hello On my pc I have 3gpu, Is it possible to choose gpu with claymore? For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3 ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) -di 12 is the command, that means gpu0 will not mine and you can game with it.
|
|
|
|
shadowhlohavec
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 207
Merit: 100
NoizChain
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 02:32:56 PM |
|
Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much
|
|
|
|
matmator
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 487
Merit: 252
bou !
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 02:51:01 PM |
|
Hello On my pc I have 3gpu, Is it possible to choose gpu with claymore? For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3 ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) -di 12 is the command, that means gpu0 will not mine and you can game with it. Thank you my friend, it works perfectly !!
|
go to the moon !!
|
|
|
matmator
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 487
Merit: 252
bou !
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 02:57:03 PM |
|
Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much
rx 480 nitro+oc_no bios mod_etc/sia 1100/2150 -98mv ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fnsa37.casimages.com%2Fimg%2F2017%2F02%2F12%2F170212041557709625.jpg&t=665&c=z45C2WkuQQK3sg)
|
go to the moon !!
|
|
|
batko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 03:11:04 PM |
|
I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet r 9 380 : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44% ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s
Your bios moded? strap 1500 or costum? nice results 24mhs gpu/mem clock?
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 03:44:34 PM |
|
I'm using Core Voltage 0, Power limit +20, Core Clock 1140, Memory 1500 that gives me 32.5 MHs, will try your set up to see what it gives, but I was looking at maybe some bios mod so not to lose too many MHs
the 390s very easy to OC, with undervolt -100mV still gives decent 30mhs mining ETH... however no point killing this GPU for 1-2 more MHs.... also, IMHO.... Hawaii and Fiji cards are very good for ZEC mining.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
gennadiv
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 03:47:25 PM |
|
the version of BIOS BIOS Version 015.049.000.011 gpu memory 1130 1695 wood AMD 17.1.1
|
|
|
|
gennadiv
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 03:49:09 PM |
|
I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet r 9 380 : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44% ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1 DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053 ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14 ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s
Your bios moded? strap 1500 or costum? nice results 24mhs gpu/mem clock? the version of BIOS BIOS Version 015.049.000.011 gpu memory 1130 1695 wood AMD 17.1.1
|
|
|
|
shadowhlohavec
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 207
Merit: 100
NoizChain
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2017, 03:50:01 PM |
|
Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much
rx 480 nitro+oc_no bios mod_etc/sia 1100/2150 -98mv ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fnsa37.casimages.com%2Fimg%2F2017%2F02%2F12%2F170212041557709625.jpg&t=665&c=z45C2WkuQQK3sg) thanks for the info, this hashrate 27+27 is for one card only? because it's dual core?
|
|
|
|
|