Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[delle54]

Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.

+1 on this lol

Dont really want to put this on claymores thread, but you could try this one out.  Im not mining with my CPU on xmr so idk but its good to try all options.
http://www.cryptominingtalk.com/xmr-stak-cpu-miner/

THX for the link, but claymore ist faster even with the -nofee 1 option.
323 h/s on a 17 7700K.

[aarons6]

im having a hard time trying to find a good spot for my hynix rx 470s it seems lower with ETH no matter what i put it, but the samsung ones 25 is good, its 24 mhs ETH and 600 mhs DCR

[Pennywis3]

My results for far with Sapphire RX 480 8GB Nitro+

29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30

But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing  

@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.

BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange

[miakama]

@Claymore. You mentioned up to 8% speed up for R9 Nano. What ethi and dcri do you use?

[henz46]

Anyone know what's best profitable pool for decred?

[Dowper]

Anyone know what's best profitable pool for decred?

Coinmine.

[Havane]

No improvement for me in ETH Mining mode with RX 480

[doktor83]

For RX 470 cards mining solo ETH, put -asm 1 -dcri 8

I have sapphire's with samsung, and xfx with hynix, on both cards dcri 8 is the best.

[Claymore]

@Claymore. You mentioned up to 8% speed up for R9 Nano. What ethi and dcri do you use?

Stock Powercolor Nano: -mode 1 -powlim 50 -dcri 120. 29.58MH/s. v8.1 shows 27.25MH/s for same drivers (15.12).

[aarons6]

so far ive settled on..
the rx 470s with samsung ram, 1000/1750 dcri 25.. its 24mhs/600mhs pretty stable.
the rx 470s with hynix ram, 1000/1750 dcri 30.. its 22mhs/650mhs pretty stable.

it doesnt matter what i put dcri at with the hynix cards, the eth stays about the same.. just dcr goes up and the card gets hotter. the samsung cards if i raise dcri dcr goes up but eth goes down.

the eth speeds are about the same as 8.1 but the dcr speeds have more than doubled..

the cards are stock, im not going to flash the bios. upping the ram to 1850 yield very little in the terms of faster speeds.. the hynix one actually gets slower. the core clock doesnt seem to do anything.. altho if you go too low it makes the mouse move funny..



so all together im averaging about 91mhs eth and 2500mhs on dcr.. with 4 rx 470 armor 4g.

[taylub]

What is going on with the failed to mine dev fee?

[miner582]

My results for far with Sapphire RX 480 8GB Nitro+

29.3 Mh/s ETH + 880 Mh/s Decred - Using -dcri 30

But, having problems with fluctuating, Speed drops from time to time for about 5-8%
Had the same problems on 8.1 also, probably my noob bios memory straping thing  

@Claymore
a very good update, thanks a lot. Can finaly move decred back to Nicehash.

BTW, i was using Zpool for Decred while it didn't work on nice hash and i gotta tell ya, that Zpool has some strange payouts indeed, sometime i got a lot more than i expected, then nothing for a whole week, very strange

My results for PowerColor RX 480 8g (mod bios):

29.05 ETH + 900 Decred using -dcri 31

but I have the same problem with fluctuating speed drop from 29 to 21 and 21 to 29. I have no problem in 8.1 any clue of what can be happen?

Another question; -ethi max value is 8? so only decrease setting is possible to fine tunning.

BTW, I am using ethos (linux)

Pennywis3, zpool have few miners so reward is high but not always they found a block then payment is not regular. I was mining at zpool but move to coinmine for less rewards but more stable

[qqqq]

No improvement for me in ETH Mining mode with RX 480

Same to me.

[Havane]

Another question; -ethi max value is 8? so only decrease setting is possible to fine tunning.

It's not 16 ?

[pajche]

29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470

[Ambros]

29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470

Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing

[pajche]

29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470

Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing

Samsung memory - 90 w per card in after burner.

[Yerba]

29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470

Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing

Samsung memory - 90 w per card in after burner.

Are speeds fluctuating as hell?
90w in AB means something like 130-140w in reality from wall.

[pajche]

29.6 - 30 Mh/s ETH and 690 Mh/s DCR -dcr 23 and -asm 2 with rx 470

Can you tell us something about power usage and memory type of those cars?
Those numbers are pretty amazing

Samsung memory - 90 w per card in after burner.

Are speeds fluctuating as hell?
90w in AB means something like 130-140w in reality from wall.

146-148 mh/s for 5 cards now. 2 bronze psu and 880w from wall complete rig. speed drops sometimes only when i connect to teamviewer.
second rig 180-182mhs eth with 6 cards and 4200mhs dcr . pwr from wall under 1000w in ab per card is 86w

[webbeast]

Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.


I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.

Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.

Hashing 119.5 ETH and 2870 DCR with this rig. Nanopool reports around 118.5 ETH 2Hour average. I guess that is because gpu3 is sometimes going idle for a mili sec. But i wont bother trying to fix it.

-ethi 15   -dcri 24

at dcri 25 it starts to affect eth speeds.


http://imgh.us/17837491_10155108274987719_1268440587_o.png
Here is the screenshot.
Hope this helps.

What do you predict the total consumption from the wall would be? I have 1 module 4gb ddr3 ram and phenom x2 240 as cpu.