Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jt00]

is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks

I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's.

What is your hash rate on decred while dual mining?

[MinerosYV]

I have some MSI R9 390s, they are running fine mining ETH but they use too much power, 300 W plus mining solo at 32.5 Mhs, 380 Watts mining dual ETH+DCR, is there any bios mod out there to kind of control the power usage? mind you my 7 card rig is using 20 amps solo 25 amps dual, will be working 220 volts next week but even then I would like to fond out of any mods for those cards.
Thanks

[Biodom]

Does this software really works on linux?

i installed it on Ubuntu 16.04 with 16.40 amdgpupro driver, run with -etha 2 or without with -mode 1.
card starts fine, then quits in two -three minutes.

Q:
1. Do i need ADL SDK or not? If yes, v. 8, 9 or 10?
 
2. Do I need AMD-APP-SDK as well? If yes, 2.9 or 3.0?

Thanks.

[Dowper]

Hello people and good to be here.

I am new in mining but old in PC world.
Recently I bought my first rig to get hobby.

I’m currently running:

MB – AsRock H81 PRO BTC v2
CPU – Intel Celeron G1840
RAM – Patriot 4GB @ 1600
SSD – SiliconPower 120GB
PSU – 2 x ThermalTake 730W
GPU - 6 x Sapphire NITRO+ RX 480 8GB – (11260-07-20G) - STOCK BIOS/ no OC
PCI – 6 x Resizers x16 to x1 (USB)

So I set it up and am running Windows 10 and Claymore Dual miner v7.4.

PROBLEM:

After 5-10 minutes of running in ether single or dual mode I would get: WATCHDOG: GPU (x) hangs in OpenCL call. Miner will “restart” and will not start again.

TRIED SO FAR:

-   Reinstalling Windows 10
-   Running both single or dual mining
-   Running on stock drivers then 16.9.1 all the way to latest
-   Removing one or more cards
-   Switching PSU to run one to four cards and back and forth
-   Switching resizers
-   Running cards in both “OC” and silent mode (bios switch)
-   Virtual Memory set to 16GB+

I think a listed all.
So is there any solution to this issue since I’m pretty out of them right now.

The only solution I found is, when I have this problem I reduce the OC of the GPU that is hanging or reduce the intensity of this GPU.  It's annoying but I haven't found better solution to this problem.

is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks

Sapphire RX470 Nitro+ 8GB - ~125W ETH/EXP mining, ~155W ETH+DCR mining. But dual mining DCR now is profitable and it's worth mining it.

[galixxx]

is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks

I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's.

What is your hash rate on decred while dual mining?

Around 430MH/s

[xuanmichael]

is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks

I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's.

setup your catalyst ? thank you!

[galixxx]

is anyone dual mining eth/etc/exp + decred with rx 470? could you please tell me your power consumption per card? Thanks

I am mining ETH+DCR. The consumption is between 95W - 101W hashing 28MH/S. I have XFX RX470's.

setup your catalyst ? thank you!

what exactly do you mean with your question? Sorry!

[matmator]

Hello

On my pc I have 3gpu,

Is it possible to choose gpu with claymore?

For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3

[gennadiv]

I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet     r 9 380                                                                                        : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s
DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s
GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44%
ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s
DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s
ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s

[citronick]

I have some MSI R9 390s, they are running fine mining ETH but they use too much power, 300 W plus mining solo at 32.5 Mhs, 380 Watts mining dual ETH+DCR, is there any bios mod out there to kind of control the power usage? mind you my 7 card rig is using 20 amps solo 25 amps dual, will be working 220 volts next week but even then I would like to fond out of any mods for those cards.
Thanks

Using Afterburner, you should use -100mV, 1040 core and 1500 memory, that will give you decent speed and save a few amps. The 390s are very good and dependable cards esp the MSI ones, but they are known powerhogs.

[MinerosYV]

I'm using Core Voltage 0, Power limit +20, Core Clock 1140, Memory 1500 that gives me 32.5  MHs, will try your set up to see what it gives, but I was looking at maybe some bios mod so not to lose too many MHs

[Dowper]

Hello

On my pc I have 3gpu,

Is it possible to choose gpu with claymore?

For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3

-di 12 is the command, that means gpu0 will not mine and you can game with it.

[shadowhlohavec]

Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much

[matmator]

Hello

On my pc I have 3gpu,

Is it possible to choose gpu with claymore?

For example the gpu 1 for gaming and at the same time I mine with gpu 2 and 3

-di 12 is the command, that means gpu0 will not mine and you can game with it.

Thank you my friend, it works perfectly !!

[matmator]

Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much

 rx 480 nitro+oc_no bios mod_etc/sia 

1100/2150
-98mv

[batko]

I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet     r 9 380                                                                                        : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s
DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s
GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44%
ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s
DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s
ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s

Your bios moded? strap 1500 or costum? nice results

24mhs gpu/mem clock?

[citronick]

I'm using Core Voltage 0, Power limit +20, Core Clock 1140, Memory 1500 that gives me 32.5  MHs, will try your set up to see what it gives, but I was looking at maybe some bios mod so not to lose too many MHs

the 390s very easy to OC, with undervolt -100mV still gives decent 30mhs mining ETH... however no point killing this GPU for 1-2 more MHs.... also, IMHO.... Hawaii and Fiji cards are very good for ZEC mining.

[gennadiv]

the version of BIOS BIOS Version
015.049.000.011 gpu memory 1130 1695 wood AMD 17.1.1

[gennadiv]

I hope that Claymore did it with new drivers from AMD 17.1.1 so at the moment he is the best driver in the increase in scoresheet     r 9 380                                                                                        : 02/12/17-18:38:07 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 71.808 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.011 Mh/s, GPU1 23.994 Mh/s, GPU2 23.803 Mh/s
DCR - Total Speed: 1077.121 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.170 Mh/s, GPU1 359.913 Mh/s, GPU2 357.038 Mh/s
GPU0 t=71C fan=41%, GPU1 t=65C fan=40%, t GPU2=72C fan=44%
ETH: 02/12/17-18:38:13 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.037 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.023 Mh/s, GPU1 24.009 Mh/s, GPU2 24.006 Mh/s
DCR - Total Speed: 1080.558 Mh/s Total Shares: 23, Rejected: 1
DCR: GPU0 360.340 Mh/s, GPU1 360.135 Mh/s, GPU2 360.083 Mh/s
ETH: 02/12/17-18:38:14 - New job from europe.ethash-hub.miningpoolhub.com:2053
ETH - Total Speed: 72.022 Mh/s Total Shares: 46, Rejected: 0, Time: 00:14
ETH: GPU0 24.042 Mh/s, GPU1 24.002 Mh/s, GPU2 23.978 Mh/s

Your bios moded? strap 1500 or costum? nice results

24mhs gpu/mem clock?

the version of BIOS BIOS Version
015.049.000.011 gpu memory 1130 1695 wood AMD 17.1.1

[shadowhlohavec]

Is anyone dual mining eth/etc/exp + decred with rx 480? Could you please share your hashrate and power consumption per card? Thank you very much

 rx 480 nitro+oc_no bios mod_etc/sia 

1100/2150
-98mv

thanks for the info, this hashrate 27+27 is for one card only? because it's dual core?