Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fmz89]

testing on ETC with same hashrate, vega itsnt same as RX, similiar with furyx didnt mater what coin is
in the futere looks like rx and other card will sell on ebay soon after vega masive production, oh boy dont worry if you already bought ton  of rx 400/500 or nvidia pascal card which is very expensive with longer ROI

[SummersideGuy]

Sorry for this a bit noob question but ... is DAG size still issue with AMD cards or did new mining driver solved this? thx

Latest blockchain driver solved the problem.

You shouldnt comment if you are only going to give a small percentage of the information needed.

The  latest block chain driver corrects the issue but you will need windows 10, windows 7 does not work with this driver in combination with any version of claymore, you will also need clamore dual miner 10.0 as previous versions as issue with clocks and voltage. There is still an issue of voltage under 900mv I believe. So you will need windows 10, Claymore 10.0 and the block chain driver to fix the issue

[Call_Me_Bambi]

hellow guys i more new to this and been tryng to run claymore v10 and i think im fail all the set up . i wana let mine XmR on supernova ssl://xmr-eu.suprnova.cc:5221

and me bat for the miner  looks like this

 NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u ACSuRdHp3fEMSWahh1Yn7faTW5BRvXaejHsj3iCJHYGRfUbvUS6qno6H4JqLnHzStwWEZa3oFkVwE1Y FUvqePCFYH7XqVdQkim2BFTJJod.xxxxx/xxxxxxxx -p x

can sombody help me to set up right thxx

I've not used Suprnova but I think your setting should be (the XMR address is set in your Suprnova account, AFAIK):
NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u USERNAME.WORKERNAME -p WORKERPASSWORD

I use the pool "MiningPoolHub" and my Monero command is:
NsGpuCNMiner.exe -o ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -u USERNAME.WORKERNAME -p x  

[P00P135]

hellow guys i more new to this and been tryng to run claymore v10 and i think im fail all the set up . i wana let mine XmR on supernova ssl://xmr-eu.suprnova.cc:5221

and me bat for the miner  looks like this

 NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u ACSuRdHp3fEMSWahh1Yn7faTW5BRvXaejHsj3iCJHYGRfUbvUS6qno6H4JqLnHzStwWEZa3oFkVwE1Y FUvqePCFYH7XqVdQkim2BFTJJod.xxxxx/xxxxxxxx -p x

can sombody help me to set up right thxx

I've not used Suprnova but I think your setting should be (the XMR address is set in your Suprnova account, AFAIK):
NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u USERNAME.WORKERNAME -p WORKERPASSWORD

I use the pool "MiningPoolHub" and my Monero command is:
NsGpuCNMiner.exe -o ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -u USERNAME.WORKERNAME -p x  

Wrong Post wrong miner.

[NoOneLt]

Claymore  suggestions:

1. Why dont you collect fee 2/3/4 times per day for longer period and not 24, woud be much more effective both for you and miner, both would loose much less shares...

2. Why dont you use pools with geolocation? In EU i always see devfee mins on US servers, useles, high ping and lost shares...

[Call_Me_Bambi]

hellow guys i more new to this and been tryng to run claymore v10 and i think im fail all the set up . i wana let mine XmR on supernova ssl://xmr-eu.suprnova.cc:5221

and me bat for the miner  looks like this

 NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u ACSuRdHp3fEMSWahh1Yn7faTW5BRvXaejHsj3iCJHYGRfUbvUS6qno6H4JqLnHzStwWEZa3oFkVwE1Y FUvqePCFYH7XqVdQkim2BFTJJod.xxxxx/xxxxxxxx -p x

can sombody help me to set up right thxx

I've not used Suprnova but I think your setting should be (the XMR address is set in your Suprnova account, AFAIK):
NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u USERNAME.WORKERNAME -p WORKERPASSWORD

I use the pool "MiningPoolHub" and my Monero command is:
NsGpuCNMiner.exe -o ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -u USERNAME.WORKERNAME -p x  

Wrong Post wrong miner.

Well I disagree, you could at least have said why it was "Wrong post wrong miner", and directed the OP to this topic.

https://bitcointalk.org/index.php?topic=638915.0

 

[MajorMiner]

Just upgraded from 9.8.... Zero difference...
9.7 to 9.8 was also zero difference.
I am running 6x MSI RX 580 Gaming 8GB, and would love to know how I can increase the hashing  



Thanks much!
MM

Better change your nickname to something more appropriate to the content of your posts.

I see what you did there nice!
I came up with the handle Major Miner back in 2011 when I was crushing Bitcoin. These days I just like playing with the toys 

[P00P135]

hellow guys i more new to this and been tryng to run claymore v10 and i think im fail all the set up . i wana let mine XmR on supernova ssl://xmr-eu.suprnova.cc:5221

and me bat for the miner  looks like this

 NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u ACSuRdHp3fEMSWahh1Yn7faTW5BRvXaejHsj3iCJHYGRfUbvUS6qno6H4JqLnHzStwWEZa3oFkVwE1Y FUvqePCFYH7XqVdQkim2BFTJJod.xxxxx/xxxxxxxx -p x

can sombody help me to set up right thxx

I've not used Suprnova but I think your setting should be (the XMR address is set in your Suprnova account, AFAIK):
NsGpuCNMiner.exe -o ssl://xmr-eu.suprnova.cc:5221 -u USERNAME.WORKERNAME -p WORKERPASSWORD

I use the pool "MiningPoolHub" and my Monero command is:
NsGpuCNMiner.exe -o ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -u USERNAME.WORKERNAME -p x  

Wrong Post wrong miner.

Well I disagree, you could at least have said why it was "Wrong post wrong miner", and directed the OP to this topic.

https://bitcointalk.org/index.php?topic=638915.0

 

Not my job to spoon feed morons.

[johndoe2]

How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

[mccampser]

Wow,  Vega 64 - 43.5MH/s at 130W: http://wccftech.com/amd-rx-vega-64-pushed-43-5mhs-130w-mining-ethereum-eclipsing-polaris-efficiency-factor-2x/  Really???

"Our test bed idles at 138 watts and the entire system consumes an average of about ~385 watts under load while mining."  Big difference than that clickbait 130w.

OK, so this screens is a fake? https://imgur.com/a/1GgvR

And no FAKE that high hashrate iff you look closely they get it on Ubiq NOT ether haha
So DAG file much smaller only way to get higher hashrate so far

i am just testing it and i get 44.2mh on vega 64 (custom water cooled) but only with power target +50% core 852 mem 1100.
while setting power target to -25% max ram speed is 500 - there seems to be a bug in blockchain driver. will test stable driver soon

[stef_stef]

What could be the cause for this error message and how do I fix it?

"Socket was closed remotely (by pool)"

After that, the miner shuts down

[Munhenhos]

Hi Claymore .
Can you please add allcoins ubq next update .. Thats will be great
Thanks

what do you mean by adding ubq? I'm mining with ubq with Claymore miner at the moment.

[Munhenhos]

Im brand new here, trying to mine eth with a G73 laptop running windows 7 w/ a GTX 460M, currently getting this error:


-----------------------------------------------------------------------------------------------------------------------
12:29:22:153   129c   ETH: job changed
12:29:22:153   129c   new buf size: 0
12:29:22:278   8bc   Setting DAG epoch #141...
12:29:23:994   1974   NVML: cannot get fan speed, error 3
12:29:25:088   8bc   Setting DAG epoch #141 for GPU0
12:29:25:088   8bc   Create GPU buffer for GPU0
12:29:25:104   8bc   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

12:29:27:275   1974   NVML: cannot get fan speed, error 3
12:29:28:117   8bc   Set global fail flag, failed GPU0
12:29:28:117   8bc   GPU 0 failed
12:29:28:149   1864   Setting DAG epoch #141 for GPU0
12:29:28:164   1864   GPU 0, CUDA error 11 - cannot write buffer for DAG
------------------------------------------------------------------------------------------------------------------------


Any help would be greatly appreciated!, Thank you




sidenote: just checked GPU RAM &:

Total available memory: 4095 MB
Dedicated Video Memory: 1536 MB
System Video Memory : 0 MB
Sharsed System Memory: 2559 MB

IF you are trying to break your laptop - just give it to me.

you can't mine ethereum, not enough dedicated memory on your GPU.

[sanhwy]

When the computer restart and claymore dual start, GPU0 have 30mh and the others GPU have 26MH! If i close claymore and start again the .bat file, all the GPU have 30mh!
Why is that ? Is a bug in claymore 10.0 ?
Tested in win 10 32 bit with rx580 8gb and 4gb, all the rigs make the same problem and need to close miner and start again!

[slazarov]

Hello,

I am mining ETH+DCR using 1070@384.94 NVIDIA drivers on Win10 Creators Update.
I have noticed that people get much higher DCR hash rate than what I am getting.
Mine seems to be capped to the ETH hash rate.

Here is a snapshot of the log without any overclock (100%/0/0):

23:37:39:900   fdc   ETH - Total Speed: 209.768 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:04
23:37:39:915   fdc   ETH: GPU0 26.021 Mh/s, GPU1 25.878 Mh/s, GPU2 25.980 Mh/s, GPU3 27.873 Mh/s, GPU4 25.981 Mh/s, GPU5 25.984 Mh/s, GPU6 26.009 Mh/s, GPU7 26.041 Mh/s
23:37:39:915   fdc    DCR - Total Speed: 2097.676 Mh/s, Total Shares: 29, Rejected: 0
23:37:39:915   fdc    DCR: GPU0 260.210 Mh/s, GPU1 258.776 Mh/s, GPU2 259.802 Mh/s, GPU3 278.734 Mh/s, GPU4 259.813 Mh/s, GPU5 259.838 Mh/s, GPU6 260.093 Mh/s, GPU7 260.410 Mh/s

This is my start.bat:

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal wallet.user/email -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal userName.worker -dpsw x -platform 2

Please advise.

[Skol600ml]

Hello,

I am mining ETH+DCR using 1070@384.94 NVIDIA drivers on Win10 Creators Update.
I have noticed that people get much higher DCR hash rate than what I am getting.
Mine seems to be capped to the ETH hash rate.

Here is a snapshot of the log without any overclock (100%/0/0):

23:37:39:900   fdc   ETH - Total Speed: 209.768 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:04
23:37:39:915   fdc   ETH: GPU0 26.021 Mh/s, GPU1 25.878 Mh/s, GPU2 25.980 Mh/s, GPU3 27.873 Mh/s, GPU4 25.981 Mh/s, GPU5 25.984 Mh/s, GPU6 26.009 Mh/s, GPU7 26.041 Mh/s
23:37:39:915   fdc    DCR - Total Speed: 2097.676 Mh/s, Total Shares: 29, Rejected: 0
23:37:39:915   fdc    DCR: GPU0 260.210 Mh/s, GPU1 258.776 Mh/s, GPU2 259.802 Mh/s, GPU3 278.734 Mh/s, GPU4 259.813 Mh/s, GPU5 259.838 Mh/s, GPU6 260.093 Mh/s, GPU7 260.410 Mh/s

This is my start.bat:

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal wallet.user/email -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal userName.worker -dpsw x -platform 2

Please advise.

No information about overclock or powerlimit. You need that for best performance.
Try -dcri 75 (or near)

Expect to GTX 1070 do 29.5 / 730 @ 150w

pl 75%
+200
+650

[ascaloon]

Okay all m y cards are hynix so I can OC them a bit? My screen for timing looks nothing like his.

Seems wrong version of PBE, you need to find one which display the timings properly... did you try the one in the article I've sent earlier?
...and always 'Run As admin'....

Yea Ia m using Polaris Bios editor 1.4 and atiwinflash

You need this hacked one for rx 5xx series. This version can properly read your VRAM.
https://drive.google.com/open?id=0BxvfcjcsbYTwVFM1anRSSk9iaTQ

[fredeq]

How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

You need to make one of your Furys a main card.
Main slot + plug monitor.

[Evan]

How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

You need to make one of your Furys a main card.
Main slot + plug monitor.

I didnt have to. try MSi After burner 4.4 beta 16

[Andrey123]

Guys help!
I put a new riser, worked the card for three hours, and again showed 511 degrees (
The driver installed through the Task Manager.
The latest from AMD, corrected for mining.
Earlier there were versions 16.9.2 such problem was not.
He put version 17, Wattman was built in, and he was in conflict with MSI berner.

Is it really worth it in these drivers?
Windows did not find anything.

How to overclock the cards without MSI berner?
I already panic (
Three days the card is idle, I can not find a solution to the problem (

Could not the card break?