Bitcoin Forum
December 13, 2024, 12:06:44 PM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 [744] 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 ... 1411 »
  Print  
Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6590798 times)
StephdeLyon
Newbie
*
Offline Offline

Activity: 44
Merit: 0


View Profile
August 16, 2017, 01:49:26 PM
 #14861

hello
i have a big problem with the last version and all over miners. works with 3 cards and when i want to put 4 gpu cards on my rig, it crashes...
all the same cards, Under win10 fresh installed, AMD driver 17.4.4, stock cards, psu 1200w seasonic prime on asrock H81 rev2

risers are ok because:
- gpu 1+2+3 => ok
- gpu 1+2+4 => ok
- gpu 1+2+3+4 => ko...

claymore start well and detect the 4 gpu's but crashed before to start mining, just after GPU detect.

please help me !!

- Make sure the card is not sharing power with another card
- Make sure each riser not sharing its power with another riser
- Run all cards on stock BIOS and stock seetings
- Uninstall MSI AB or similar software
- Run DDU in safe mode
- Reinstall AMD driver, the latest
- Run Claymore with minimal settings -cvdcc 1000 -mvdcc 1500

Share results and screenshots from GPU-Z

hello,
i did everything and its still the same problem... im running now Under 4 cards and it's crashing.
Under GPUZ i don't see any problem and all the cards are detected. no time to post screenshots for the moment.
any idea ?
i put under 2 cards, i've got another problem about drivers, perhaps it's my problem, with 2 cards, on pciexpress 1 and 2,
one cards is Under Crimson 17.7.2 / whql /win10 64 drivers (opencl ticked)
and the second one is only whql / win10 64 drivers (opencl not ticked)




Did you run DDU? be honest...

of course i did it !
i had to go to my job this morning, not enought time sorry.
here is the screenshot with one card, it seem that there an exclamation behind my card. Conflict between windows drivers and AMD driver ??
do i have to use DDU each time i add a card and re install crimson AMD drivers 17.7.2 ?
https://www.noelshack.com/2017-33-3-1502867786-capture.png

i tried to use simplemining and it does not work well at all... only 10mhs with 3 cards and gpu core often low at 300 instead of 1236, really strange. I had the 300mhz issue yesterday and it was afterburner causing the issues. I pressed the reset button in afterburner and the clock went back up. Some say online to remove afterburner and reinstall it.


I believe you have two problems. First of all you need to reset all you afterburner settings if you are using it. Or if you are using any other overclock software just uninstall it until you get things sorted.

Then your 4th card is probably not showing up because of the motherboard bios. You need to make sure above 4g decoding is enabled. Some mobo brands call it something else. Some don't support it.
I use them stock and no msi afterburner installed.
I have a h81 asrock rev2, i will look for this,  but my 4th card is recognized but it crashes. Sometimes its difficult, i have to change pciexpress port to be recognized but it works.
don.ton
Newbie
*
Offline Offline

Activity: 21
Merit: 0


View Profile
August 16, 2017, 01:49:49 PM
 #14862

Is there anyone here that tried to undervolt and overclock using Claymore's miner (any version) with the new official Beta drivers?

I tried it. Doesn't works.  Sad
For me the same with Wattman or AB, doesn't works for undervolting.
MrJaekin
Sr. Member
****
Offline Offline

Activity: 275
Merit: 258


View Profile
August 16, 2017, 01:54:43 PM
 #14863

Has anyone tried the new beta drivers with the VEGA 64 card?
johndoe2
Newbie
*
Offline Offline

Activity: 21
Merit: 0


View Profile
August 16, 2017, 02:05:02 PM
Last edit: August 16, 2017, 02:54:53 PM by johndoe2
 #14864

Hello. Thank you to all the devs for creating such a great miner.
I was trying to dual mine with siacoin and it kept giving me this error.  Server: bind failed with error: 10048
I added the last two lines from beginning of this thread, and it kept giving me error. please help.


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal 0xbF5498Dcb68228c314BE963d4f0913F2dyAdF23E.Miningrig2 -epsw x
 ethpool, ethermine  (and Siacoin pool):
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a1390oE6F.YourWorkerName -epsw x -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3be0304dee313515cf401b8593a0c1df905ed13f0adaee89a8d7337d2ba8209e5ca9f297bbc2 -dcoin sia



You don't have the correct address for your sia pool.

it should look like this.  

-dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -dcoin sia

Thanks, um do I exclude the EthDcrMiner?  Huh
androstan1234
Jr. Member
*
Offline Offline

Activity: 251
Merit: 6


View Profile
August 16, 2017, 02:07:21 PM
 #14865

I cannot even install the driver.  I ran ddu, restarted, then tried to install the driver.  Partway through installation I get a blue screen with stop code "SYSTEM THREAD EXCEPTION NOT HANDLED," and saying that atikmpag.sys failed.

I had the same issue but that was without DDU use, I tried to update the driver by installing it over the other one, after reboot I used DDU and it worked make sure you reboot after each step..


Thanks, I did reboot after each step.  Fixed this by removing all gpus except one.

Getting roughly an extra mhs on each card.
cdrx
Full Member
***
Offline Offline

Activity: 441
Merit: 109


View Profile
August 16, 2017, 02:24:50 PM
 #14866

Claymore 9.8
AMD Driver [Suspicious link removed]p*ute
Gigabyte RX 580 Gaming 8 GB

Voltage doesn't work with Wattman and AB beta 16 or Trixx.

Here is my screen capture,

Using Claymore V9.7 not V9.8



works for you, but I do have 580, not 480. Somehow with "reference design" in AB works, but I am mining eth fork (different dag) - and when dev mining starts and then stops, I am losing my undervoltage.
token_coin_guy
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 16, 2017, 02:53:55 PM
 #14867

updated to 17.7.2 and 9.8 and I cannot keep memory clock at 2045 where I usually keep it.. it keeps bouncing 2045 to 1000 and back to 2045 as a result my hash rate is saw tooth even on my pool page. evn in wattman, the slider is not able to be set to a static value.. seems greyed out.

I installed with DDU to clear old drivers, I also tried upgrading to the new beta drivers and no fix.

it was fine prior to upgrading to 17.7.2

Has anyone else come across this issue?

ASUS ROG Strix Radeon RX 580

https://i.imgur.com/OZ0Zs3C.png
token_coin_guy
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 16, 2017, 03:02:24 PM
Last edit: August 16, 2017, 03:15:15 PM by token_coin_guy
 #14868

updated to 17.7.2 and 9.8 and I cannot keep memory clock at 2045 where I usually keep it.. it keeps bouncing 2045 to 1000 and back to 2045 as a result my hash rate is saw tooth even on my pool page. evn in wattman, the slider is not able to be set to a static value.. seems greyed out.

I installed with DDU to clear old drivers, I also tried upgrading to the new beta drivers and no fix.

it was fine prior to upgrading to 17.7.2

Has anyone else come across this issue?

ASUS ROG Strix Radeon RX 580

https://i.imgur.com/OZ0Zs3C.png

disabled secondary monitor and rebooted and I can control memory clock in wattman, but it's still bouncing to 1000 mhz and getting messed up hash
okiagr
Newbie
*
Offline Offline

Activity: 10
Merit: 0


View Profile
August 16, 2017, 03:22:32 PM
 #14869

updated to 17.7.2 and 9.8 and I cannot keep memory clock at 2045 where I usually keep it.. it keeps bouncing 2045 to 1000 and back to 2045 as a result my hash rate is saw tooth even on my pool page. evn in wattman, the slider is not able to be set to a static value.. seems greyed out.

I installed with DDU to clear old drivers, I also tried upgrading to the new beta drivers and no fix.

it was fine prior to upgrading to 17.7.2

Has anyone else come across this issue?

ASUS ROG Strix Radeon RX 580

https://i.imgur.com/OZ0Zs3C.png

disabled secondary monitor and rebooted and I can control memory clock in wattman, but it's still bouncing to 1000 mhz and getting messed up hash

Try to remove the gpu and memory clock settings in your bat file. Leave just the wattman settings.
token_coin_guy
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 16, 2017, 03:31:18 PM
 #14870

updated to 17.7.2 and 9.8 and I cannot keep memory clock at 2045 where I usually keep it.. it keeps bouncing 2045 to 1000 and back to 2045 as a result my hash rate is saw tooth even on my pool page. evn in wattman, the slider is not able to be set to a static value.. seems greyed out.

I installed with DDU to clear old drivers, I also tried upgrading to the new beta drivers and no fix.

it was fine prior to upgrading to 17.7.2

Has anyone else come across this issue?

ASUS ROG Strix Radeon RX 580

https://i.imgur.com/OZ0Zs3C.png

disabled secondary monitor and rebooted and I can control memory clock in wattman, but it's still bouncing to 1000 mhz and getting messed up hash

Try to remove the gpu and memory clock settings in your bat file. Leave just the wattman settings.

and now it's randomly greyed out again in wattman so I can't control it. this is getting crazy. think i am going to roll back driver upgrades
Jell
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 16, 2017, 03:51:10 PM
 #14871

I purchased a RX Vega 64 (standard air cooled) didn't have chance to do anything with it until today. With the standard driver i was getting 31-31Mh/s on Claymore 9.8 ETH only using nanopool.

I have switched to the new AMD Beta driver, i was getting 34Mhs but leaving the fan on auto the temps go through the roof, once it gets near 70 Deg C it would slow down.

Using WattMan, ive underclocked the CPU, undervolted the CPU, overclocked the Memory and undervolted the memory. I have also switched the fan profile to manual, Minimum 75% and Target 100%.

Its been running ETH only for about 3 hours now, im getting steady 43.3 - 43.4 Temp is steady at 63 Deg C

Sadly at the wall my idle usage goes from 70w up to 350w when mining and i wont talk about the fan noise.
MrJaekin
Sr. Member
****
Offline Offline

Activity: 275
Merit: 258


View Profile
August 16, 2017, 03:55:58 PM
 #14872

I purchased a RX Vega 64 (standard air cooled) didn't have chance to do anything with it until today. With the standard driver i was getting 31-31Mh/s on Claymore 9.8 ETH only using nanopool.

I have switched to the new AMD Beta driver, i was getting 34Mhs but leaving the fan on auto the temps go through the roof, once it gets near 70 Deg C it would slow down.

Using WattMan, ive underclocked the CPU, undervolted the CPU, overclocked the Memory and undervolted the memory. I have also switched the fan profile to manual, Minimum 75% and Target 100%.

Its been running ETH only for about 3 hours now, im getting steady 43.3 - 43.4 Temp is steady at 63 Deg C

Sadly at the wall my idle usage goes from 70w up to 350w when mining and i wont talk about the fan noise.

This is what I was afraid of.. looks like 70-100MH/s was too good to be true. Only time will tell I guess. Once we get past the locked VBIOS hopefully we can get the power usage down and MH/s up.  Don't think we'll be hitting 70-100 though.  Thanks for the update!
Ursul0
Sr. Member
****
Offline Offline

Activity: 857
Merit: 262


View Profile
August 16, 2017, 04:00:36 PM
 #14873

the amd dag fix driver release seem to be a bit more stable(possibly) version of the custom beta dag fix that was available before.
same lower power consumption and same improved hash numbers...

if you install only drivers (no amd gui shit. try to make a habit of it) you don't even need DDU (which for me causes UEFI win10 setup to get 32bit display driver by default and needs BIOS access two times to boot after ddu).

no need for AB nor Trixx or other crap.
Just tighter straps + undervolt in bios and set clocks and volts in claymore
Xardas2014
Hero Member
*****
Offline Offline

Activity: 635
Merit: 500


View Profile
August 16, 2017, 04:08:15 PM
 #14874

From what I see so far, the Vega isn't worth the money. I only bought one to test, a water cooled version, but it hasn't arrived yet. From what I'm reading the power usage makes the Vega a terrible choice for mining.
Tiurog
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
August 16, 2017, 04:10:18 PM
 #14875

Is there a way to get Claymore use the new driver files without installing the package?

I tried to move the new driver file from the beta driver to the claymore folder and EthDcrMiner64.exe are indeed load up the files but the hashrate is still the same old speed from the earlier driver that are installed on Windows. So it looks like Claymore is still using the OS driver files.

files: atig6txx.dll, amdocl12cl64.dll, amd_opencl64.dll->opencl.dll,
I also tested: all files from the driver package into the claymore folder, still no change. (C:\AMD\Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug11\Packages\Drivers\Display\WT6A_INF\B316900)

@Claymore, is it possible that your miner uses driver files out of your folder? If yes, which one are specific to mining, except the ones i listed.

The problem is, the new drivers are very unstable with under-clocking and only the 17.5.2 driver is the last stable driver that works for me 100%. So i want to keep the old driver while using the new fixed driver for mining.
joe318
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
August 16, 2017, 04:54:52 PM
 #14876

Hi everybodyyyyy

I have one strange problem, i have one rig with 6 rx series 5, it work well at 2 months ago, but now with this blockchain driver, when i turn off teamviewer he restart, if i stay with teamviewer opened, no problem he mine very well, i win around 9 mh/s.

I have 6 dummies, i know it's a lot, but when i build it, i do a lot tests and i forget take out this dummies lol.

Someone with the same bug?

Thank you

PS i forget told you, now with remote desktop from windows, he work like a charm, before this update .......
NavyCuda
Member
**
Offline Offline

Activity: 107
Merit: 10


View Profile
August 16, 2017, 05:00:10 PM
 #14877

It seems as though the blockchain drivers do not support Vega FE.
Ursul0
Sr. Member
****
Offline Offline

Activity: 857
Merit: 262


View Profile
August 16, 2017, 05:24:14 PM
 #14878

The problem is, the new drivers are very unstable with under-clocking and only the 17.5.2 driver is the last stable driver that works for me 100%. So i want to keep the old driver while using the new fixed driver for mining.

New drivers stability seems to be just fine. you're likely doing something wrong...
not really sure though what exactly, provide more information. like what cards are you using and what are the settings and bioses?
Ursul0
Sr. Member
****
Offline Offline

Activity: 857
Merit: 262


View Profile
August 16, 2017, 05:29:49 PM
 #14879

Hi everybodyyyyy

I have one strange problem, i have one rig with 6 rx series 5, it work well at 2 months ago, but now with this blockchain driver, when i turn off teamviewer he restart, if i stay with teamviewer opened, no problem he mine very well, i win around 9 mh/s.

I have 6 dummies, i know it's a lot, but when i build it, i do a lot tests and i forget take out this dummies lol.

Someone with the same bug?

Thank you

PS i forget told you, now with remote desktop from windows, he work like a charm, before this update .......

6 dummies is not very smart...
I can recommend RealVNC - works like a charm.

Also dont use RDP, as it seriously fucks with the display drivers, this MS crap is just too high level for it to work proper. (you can seemingly access the running miner, but you cannot start the miner app, as it will see no GPUs. )

Also you can try to use this: https://docs.microsoft.com/en-us/sysinternals/downloads/autologon
(as your issues could be related to running sessions)
wOvAN
Jr. Member
*
Offline Offline

Activity: 41
Merit: 3


View Profile
August 16, 2017, 05:40:25 PM
 #14880

On Win7 Claymore not working for me with new AMD Fix Drivers from 08.08.17  but works pretty fine witj 27.03.17 version. (rx580 )
It exits at very begining with no messages after "mine/solo"  

ps: yes, I've tried ddu etc.
Pages: « 1 ... 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 [744] 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 ... 1411 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!