Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[muzuca]

Hey guys,

So seems like one of my RX480s Nitro+ has packed up. The lights at the top light up ok but fans don't come on even during start up when all fans should. I've tried moving it around to different risers but still end up with same result of not starting up. I've moved the switch to powersave to see if it was anything related to the BIOS but no luck. I've checked all around the connectors (without opening up the card) and everything seems ok.

Anyone have any idea of what else I could do to check it? As it's not being recognised by PC I can't even run further tests.

Cheers,

I think you tried every step that I know... sometime ago I lost a GPU with the same symptons... for some reason stop to work and I have to buy a new one. In my case I was putting a lot of power (cclock and mcclock), stressing the gpu.

[tg88]

just a second line with siacoin? if yes what is best pool here/wallet to use?

I recommend using siamining.com, it is easier and stable.

Here are the parameters you need to use:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourEthAddress.YourWorkerName -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sia

[NewbieMiner17]

im current mining on ethermine pool..the miner runs fine for few hours and gets disconnected for few seconds and then reconnects to nanopool and gpu keeps running...i dont know whts the problem...can anybody help...

What pools do you have set on Pools.txt file? Set it at Ethermine for 1st back up pool and see if that helps.

[Swiped]

Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week?  Seems like the drop in productivity is higher than the rate of difficulty increase.  I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it.  Thoughts?

[msvend]

Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week?  Seems like the drop in productivity is higher than the rate of difficulty increase.  I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it.  Thoughts?

I've noticed this as well, it's been getting worse and worse each day.

[muzuca]

just a second line with siacoin? if yes what is best pool here/wallet to use?

I recommend using siamining.com, it is easier and stable.

Here are the parameters you need to use:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourEthAddress.YourWorkerName -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sia

Hello.

What dcri config do you use to get the best performance of ETH and SIA mining? I tested -dcri 15 and was good. Do you have any suggestion?

[ruplikminer]

Noob question

if I mine ZCASH using the Dual Ethereum miner (not in dual mode) or if I use the  Claymore's ZCash/BTG GPU Miner v12.6 will I have the same speed results? Or one could be faster than the other?


thanks!!

[rdluffy]

Anyone having this issue?

Temperature control thread hangs, need to restart miner!

Using 10.3 Claymore
Windows 10 pro Updated
2x RX 580 4gb Sapphire
Latest Drivers from AMD - Compute mode

[papampi]

Thanks for Linux version

[foreveralone7]

Hi, I'm new to mine
and I have no knowledge of how to start ...
I already have my gpu to mine but I do not know where to start, someone could help me please.
Thank you

[chudm]

Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week?  Seems like the drop in productivity is higher than the rate of difficulty increase.  I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it.  Thoughts?

I've noticed this as well, it's been getting worse and worse each day.

Im having the same issue 

seems we have to move to another pool, which one should be fine?

[muzuca]

Anyone having this issue?

Temperature control thread hangs, need to restart miner!

Using 10.3 Claymore
Windows 10 pro Updated
2x RX 580 4gb Sapphire
Latest Drivers from AMD - Compute mode

Is it the 511 error? If yes, probably is the energy from psu that connect to the risers. Try to change all the set (riser and the psu cable).

[jang430]

I have 6 RX 580 and 5 GTX 1070, using AMD Radeon Beta Blockchain driver. 

I have AB installed.  Forgot which version.

Used to be, I have Claymore undervolt AMDs and AB powerlimit Nvidias.  Using Claymore to undervolt AMDs since powerlimit in RXs greyed out.  Which works out fine for me.

I restarted my rig today, and it informed me that AB has some update.  It didn't ask to install, instead, I thought it was a simple notification.  After which, AB can adjust powerlimit for RX already today.  My power usage shoot up, and my claymore undervolt settings no longer working. 

I am thinking uninstall AB, and reinstall old version, 4.3.0?  So as RX powerlimit stays greyed out?  And again use Claymore to undervolt?  Will this work?

[mu_enrico]

Is it possible to mine eth classic, eth, and eth zero (future) at the same time just like dual mining? *just curious

[Habieredkill]

I have a problem with the hashrate drop on my RX480 4GB cards (Win 10, beta Blockchain drivers). Driver updates are disabled, all GPUs show 100% OK in Device Manager.
They were hashing at 28-29 MH/s until last week. Now they push only 26-26.5 MH/s at the same algo/coin/frequencies and voltages and the power draw is ~10% lower than earlier.
Thoughts?

[bulgar73]

Is it possible to mine eth classic, eth, and eth zero (future) at the same time just like dual mining? *just curious

No. You can mine only coins with different algo.

----
BTC

[cdrx]

Claymore, can you add please dev fee pool for pegascoin (PGC) ? https://bitcointalk.org/index.php?topic=2132259.0

Thanks.

choose from https://minerpool.net/pools/pegascoin/

[cryptoclock-ro]

Greetings to everyone!
There is a pretty new anonymous cryptocoin that may have a great future, being ASIC resistant and based on the EQUIHASH algorithm.
Is called BitcoinZ and is inspired from ZCash. Here is a video about it and an interactive explanation of the zkSNARKS algorithm:

https://youtu.be/3hVG888tOpY

If you have some free time, please check it out!
Thanks in advance and have a nice day!

[tg88]

Hello.

What dcri config do you use to get the best performance of ETH and SIA mining? I tested -dcri 15 and was good. Do you have any suggestion?

Ideally, you should be testing with the miner in operation, just use the + and - keys.

I think dcri 15 is a good value.

[osnwt]

I have been running with the onboard video disabled in the motherboard BIOS.  Using GPU0 as primary display in the 16x slot.   Running 10.3(.1?) and have the same issues.  Appreciate everyone trying to help.

No idea then. Was it ok some day before?

Sometimes AMD drivers do weird things. I may suggest to uninstall all drivers using DDU utility (display driver uninstaller), reboot and install them again. Sometimes such things help.