Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[whoismoses]

I have tried running 2 x Instances, but i get the message the port is in use, which makes sense.

Also, the reason you get port in use error is that there are two instances on the same port (which you figured out). Just a reminder if you fix that...

By default it using port 3333 but the value of "-mport" is "-3333". The negative makes it read only. Don't remove the negative unless you put a password on it.

[1715051265]

1715051265

[1715051265]

1715051265

[1715051265]

1715051265

[1715051265]

1715051265

[e97]

thanks claymore!

shows 44 Mh/s on Vega64 and 37 Mh/s on 1080 Ti, hopefully number of submitted shares shows a similar increase

ethminer seems to run a bit faster on the 1080 Ti, any chance you could integrate those improvements? might be from cuda-9 code.


Reported:

miner	vega 64	1080 ti	combined
ethminer	42	38	80
claymore	44	37	81

Will report back on accepted share rate after 24 hours.

ethminer gives me ~ 56.16 shares per hour
claymore gives me ~ 55.64 shares per hour

claymore reports a higher hash rate but im seeing less shares per hour, even with the 1% dev fee, theres something off. for now im switching back to ethminer.

lol

Set -dcri to 5 , 10 or 15 max even when solo mining

I'll give it a try if I get a chance.. using my own customized version of ethminer I'm at 83 Mh/s and ~ 59.2 shares per hour

[Ratledge]

I did a clean install and no change.  I think its Win10 17074 but just wanting others to confirm there are no issues with 10.5 or the latest NVIDIA drivers.

If anything, my generic HP/nVidia GTX1060 3GB went up 5% with 10.5 and I had recently installed Windows 10 "Winter update".

I do have a nit in that it shows my hash rate for Sia = 10× the rate for Ethereum (precisely, moves decimal one place left).

My hash rate was consistent 19.7 Mh/s before and now is sticking to 20.1

[Marvell2]

Anyone else mining pascalcoin to poliniex ?

I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo

I'm using the correct account and payment id payload

[neweggslave23]

Now, this is a weird issue, using the latest 10.5 mining on ethermine pool.

I noticed after the connection gets closed by the pool, and after i reconnect successfully back to the server.

Sometimes, the hashrate and shares being submitted will not show up on the ethermine dashboard, it will show as zero for a random amount of time, then it will show up again.

It's a long shot, but does anyone know how to fix this?

I'm thinking of going back to 10.2, atm i have zero idea what is going on, it's happening on 2/3 of my rigs.

[Tomee]

Anyone else mining pascalcoin to poliniex ?

I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo

I'm using the correct account and payment id payload

the same problem, the first one has come to yes, next one not

[cuongmn64]

Hey guys, is dual mining dead?
They just ship Baikal Giant-B and all the dual coin profit just drop ~90%

[Marvell2]

Anyone else mining pascalcoin to poliniex ?

I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo

I'm using the correct account and payment id payload

the same problem, the first one has come to yes, next one not

sorry what do you mean?

[Marvell2]

Hey guys, is dual mining dead?
They just ship Baikal Giant-B and all the dual coin profit just drop ~90%

dcr, sia mining is dead, but only one pascal asic atm

so pascal is still good for dual mining

[AzzAz]

Today I’ve noticed on my 7 RX 580 Rig that the Remote Manager link disconnects every few minutes when mining. I just recently increased my mclock to 2175 from 2150 on all but 2 cards. ETHI is 16, DCRI is 18. Clock is 1150, cvddc & mvddc 925. I have XFX XXX 8GB cards. Could the mclock increase be causing this?

XFXs are good cards but bit sensitive to memory temps. So, yes, mclock now heats them up. Lowering overall temp can help ( big powerful fan etc...)

[ganzocrypt]

Hey guys, is dual mining dead?
They just ship Baikal Giant-B and all the dual coin profit just drop ~90%

dcr, sia mining is dead, but only one pascal asic atm

so pascal is still good for dual mining

I agree ASIC is killing GPUs mining on these coins. I was mining between 500/1000 SIA coins a day, now it takes days. Since December, ASICs miners came online and difficulty skyrocket! So dual mining with these coins is not worth anymore.

Any plans for Claymore to add different algo to the dual mining list?

[cryptoreporting]

I have a bunch of MSI Aero 560 ITXs.  They work great in Claymore 10.4 (Ubuntu 16.04 LTS), but I have noticed that every now and then when a GPU hangs or crashes, it tries to reinitialize all the cards and start computing again.  

This is what should happen, however it seems like it doesn't clear the DAG from the 560s GPU cache/ram, so when it reinitializes, it shows up as 1.7GB memory per card, instead of 4GB.  This seems like what is happening since the DAG is about 2.2GB right now, so that works out perfectly math wise.  

This results in claymore hanging and turning into a defunct process.  I have tried killing the pid, kill -9, etc, but the only way I have found to fix this is to reboot, which isn't the best solution.  Does anyone know how to clear the GPU cache/RAM w/o rebooting?

This only happens on RX 560s btw.  I have 570s and 580s running that don't experience this issue.

Claymore any ideas?

Is there a way to forcefully clear it by writing certain values to /sys/class/drm/cardX?

Thanks.

[cuongmn64]

Hey guys, is dual mining dead?
They just ship Baikal Giant-B and all the dual coin profit just drop ~90%

dcr, sia mining is dead, but only one pascal asic atm

so pascal is still good for dual mining

Doesn't Baikal Giant-B also mine pascal as well? Am I missing something?

[twicx]

Having some stability issues that I think is down to oc settings. One or two of my rx580s seem to run a bit hot (70C) and occasionally crash or claymore crashes. Current oc settings are 1150/2000 with 820mv across the board. I'm happy enough to sacrifice a little hashrate for stability and lower temps.

Any ideas?

[Amstellodamois]

For AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup.
For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.

Not sure I got that right 


I have 7 RX 580 8 GB. Which drivers will be the most efficient?

[Icoservices2018]

Hello guys, i was mining eth + dcr and i dont know how, i cant connect to the dcr server and thats makes reboot the rig contanstly.  I am mining with SMOS and thats makes me crazy. I have x6 RX570 4Gb, i was wondering if it could be for the 4Gb cards. Regards

[Call_Me_Bambi]

Having some stability issues that I think is down to oc settings. One or two of my rx580s seem to run a bit hot (70C) and occasionally crash or claymore crashes. Current oc settings are 1150/2000 with 820mv across the board. I'm happy enough to sacrifice a little hashrate for stability and lower temps.

Any ideas?

I think you pretty much answered your own question. Not all cards are created equal, it can be a bit of a lottery even with 'identical' cards.
You'll probably just have to accept a lower hashrate from the renegade card.

[Amstellodamois]

For AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup.
For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.

Not sure I got that right 


I have 7 RX 580 8 GB. Which drivers will be the most efficient?

For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.

So just use the newest driver. Make sure to set everything to compute mode.

Thanks. So the Adrenalin Edition 18.1.1 from there.

[sonerbo]

Does anybody mine with 2gb cards ?? İf yes which coins and are they profitable ? Ubiq and Exp are at the edge ı think then what to do with these cards ??

[ltomovski]

Anyone else mining pascalcoin to poliniex ?

I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo

I'm using the correct account and payment id payload

They are having troubles from time to time .. atm I am waiting for 8 pascs ... eventually all pascals are being paid ..