whoismoses
Member
Offline
Activity: 247
Merit: 59
|
|
January 22, 2018, 04:11:38 AM |
|
I have tried running 2 x Instances, but i get the message the port is in use, which makes sense.
Also, the reason you get port in use error is that there are two instances on the same port (which you figured out). Just a reminder if you fix that... By default it using port 3333 but the value of "-mport" is "-3333". The negative makes it read only. Don't remove the negative unless you put a password on it.
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
e97
Jr. Member
Offline
Activity: 58
Merit: 1
|
|
January 22, 2018, 05:11:20 AM |
|
thanks claymore! shows 44 Mh/s on Vega64 and 37 Mh/s on 1080 Ti, hopefully number of submitted shares shows a similar increase ethminer seems to run a bit faster on the 1080 Ti, any chance you could integrate those improvements? might be from cuda-9 code. Reported: miner | vega 64 | 1080 ti | combined | ethminer | 42 | 38 | 80 | claymore | 44 | 37 | 81 |
Will report back on accepted share rate after 24 hours. ethminer gives me ~ 56.16 shares per hour claymore gives me ~ 55.64 shares per hour claymore reports a higher hash rate but im seeing less shares per hour, even with the 1% dev fee, theres something off. for now im switching back to ethminer. lol Set -dcri to 5 , 10 or 15 max even when solo mining I'll give it a try if I get a chance.. using my own customized version of ethminer I'm at 83 Mh/s and ~ 59.2 shares per hour
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
January 22, 2018, 05:51:27 AM |
|
I did a clean install and no change. I think its Win10 17074 but just wanting others to confirm there are no issues with 10.5 or the latest NVIDIA drivers.
If anything, my generic HP/nVidia GTX1060 3GB went up 5% with 10.5 and I had recently installed Windows 10 "Winter update". I do have a nit in that it shows my hash rate for Sia = 10× the rate for Ethereum (precisely, moves decimal one place left). My hash rate was consistent 19.7 Mh/s before and now is sticking to 20.1
|
|
|
|
Marvell2
|
|
January 22, 2018, 06:10:57 AM |
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
|
|
|
|
neweggslave23
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 22, 2018, 06:54:42 AM |
|
Now, this is a weird issue, using the latest 10.5 mining on ethermine pool.
I noticed after the connection gets closed by the pool, and after i reconnect successfully back to the server.
Sometimes, the hashrate and shares being submitted will not show up on the ethermine dashboard, it will show as zero for a random amount of time, then it will show up again.
It's a long shot, but does anyone know how to fix this?
I'm thinking of going back to 10.2, atm i have zero idea what is going on, it's happening on 2/3 of my rigs.
|
|
|
|
Tomee
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 22, 2018, 06:57:34 AM |
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
the same problem, the first one has come to yes, next one not
|
|
|
|
cuongmn64
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 22, 2018, 07:05:09 AM |
|
Hey guys, is dual mining dead? They just ship Baikal Giant-B and all the dual coin profit just drop ~90%
|
|
|
|
Marvell2
|
|
January 22, 2018, 07:43:36 AM |
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
the same problem, the first one has come to yes, next one not sorry what do you mean?
|
|
|
|
Marvell2
|
|
January 22, 2018, 07:44:22 AM |
|
Hey guys, is dual mining dead? They just ship Baikal Giant-B and all the dual coin profit just drop ~90%
dcr, sia mining is dead, but only one pascal asic atm so pascal is still good for dual mining
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
January 22, 2018, 08:04:01 AM |
|
Today I’ve noticed on my 7 RX 580 Rig that the Remote Manager link disconnects every few minutes when mining. I just recently increased my mclock to 2175 from 2150 on all but 2 cards. ETHI is 16, DCRI is 18. Clock is 1150, cvddc & mvddc 925. I have XFX XXX 8GB cards. Could the mclock increase be causing this?
XFXs are good cards but bit sensitive to memory temps. So, yes, mclock now heats them up. Lowering overall temp can help ( big powerful fan etc...)
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
January 22, 2018, 08:57:54 AM |
|
Hey guys, is dual mining dead? They just ship Baikal Giant-B and all the dual coin profit just drop ~90%
dcr, sia mining is dead, but only one pascal asic atm so pascal is still good for dual mining I agree ASIC is killing GPUs mining on these coins. I was mining between 500/1000 SIA coins a day, now it takes days. Since December, ASICs miners came online and difficulty skyrocket! So dual mining with these coins is not worth anymore. Any plans for Claymore to add different algo to the dual mining list?
|
|
|
|
cryptoreporting
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 22, 2018, 08:58:31 AM Last edit: January 22, 2018, 09:13:51 AM by cryptoreporting |
|
I have a bunch of MSI Aero 560 ITXs. They work great in Claymore 10.4 (Ubuntu 16.04 LTS), but I have noticed that every now and then when a GPU hangs or crashes, it tries to reinitialize all the cards and start computing again.
This is what should happen, however it seems like it doesn't clear the DAG from the 560s GPU cache/ram, so when it reinitializes, it shows up as 1.7GB memory per card, instead of 4GB. This seems like what is happening since the DAG is about 2.2GB right now, so that works out perfectly math wise.
This results in claymore hanging and turning into a defunct process. I have tried killing the pid, kill -9, etc, but the only way I have found to fix this is to reboot, which isn't the best solution. Does anyone know how to clear the GPU cache/RAM w/o rebooting?
This only happens on RX 560s btw. I have 570s and 580s running that don't experience this issue.
Claymore any ideas?
Is there a way to forcefully clear it by writing certain values to /sys/class/drm/cardX?
Thanks.
|
|
|
|
cuongmn64
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 22, 2018, 09:31:15 AM |
|
Hey guys, is dual mining dead? They just ship Baikal Giant-B and all the dual coin profit just drop ~90%
dcr, sia mining is dead, but only one pascal asic atm so pascal is still good for dual mining Doesn't Baikal Giant-B also mine pascal as well? Am I missing something?
|
|
|
|
twicx
Member
Offline
Activity: 88
Merit: 10
|
|
January 22, 2018, 12:30:36 PM |
|
Having some stability issues that I think is down to oc settings. One or two of my rx580s seem to run a bit hot (70C) and occasionally crash or claymore crashes. Current oc settings are 1150/2000 with 820mv across the board. I'm happy enough to sacrifice a little hashrate for stability and lower temps.
Any ideas?
|
|
|
|
Amstellodamois
Newbie
Offline
Activity: 182
Merit: 0
|
|
January 22, 2018, 02:34:12 PM |
|
For AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup. For AMD 4xx/5xx cards (Polaris) you can use any recent drivers. Not sure I got that right I have 7 RX 580 8 GB. Which drivers will be the most efficient?
|
|
|
|
Icoservices2018
Jr. Member
Offline
Activity: 176
Merit: 5
|
|
January 22, 2018, 02:43:24 PM |
|
Hello guys, i was mining eth + dcr and i dont know how, i cant connect to the dcr server and thats makes reboot the rig contanstly. I am mining with SMOS and thats makes me crazy. I have x6 RX570 4Gb, i was wondering if it could be for the 4Gb cards. Regards
|
|
|
|
Call_Me_Bambi
|
|
January 22, 2018, 04:01:42 PM |
|
Having some stability issues that I think is down to oc settings. One or two of my rx580s seem to run a bit hot (70C) and occasionally crash or claymore crashes. Current oc settings are 1150/2000 with 820mv across the board. I'm happy enough to sacrifice a little hashrate for stability and lower temps.
Any ideas?
I think you pretty much answered your own question. Not all cards are created equal, it can be a bit of a lottery even with 'identical' cards. You'll probably just have to accept a lower hashrate from the renegade card.
|
|
|
|
Amstellodamois
Newbie
Offline
Activity: 182
Merit: 0
|
|
January 22, 2018, 05:08:49 PM |
|
For AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup. For AMD 4xx/5xx cards (Polaris) you can use any recent drivers. Not sure I got that right I have 7 RX 580 8 GB. Which drivers will be the most efficient? For AMD 4xx/5xx cards (Polaris) you can use any recent drivers. So just use the newest driver. Make sure to set everything to compute mode. Thanks. So the Adrenalin Edition 18.1.1 from there.
|
|
|
|
sonerbo
|
|
January 22, 2018, 05:21:17 PM |
|
Does anybody mine with 2gb cards ?? İf yes which coins and are they profitable ? Ubiq and Exp are at the edge ı think then what to do with these cards ??
|
|
|
|
ltomovski
Newbie
Offline
Activity: 19
Merit: 0
|
|
January 22, 2018, 05:53:56 PM |
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
They are having troubles from time to time .. atm I am waiting for 8 pascs ... eventually all pascals are being paid ..
|
|
|
|
|