nmullen559
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 31, 2018, 06:07:05 PM |
|
Hello and thank you for your time. I am pretty new to mining so please bare with me! I just started mining ethereum on simplemining using claymore v10.6. I'm currently running 4 - 1080ti's and 5- 1050ti's on the Asus mining expert b250 mobo with 8gb of ddr4 ram with an Intel Pentium G4400 Dual-core (2 Core) 3.30 GHz Processor. I am trying to just mine ethereum and not dual mine and I am donating but I'm noticing I'm getting about 5% lower MH/s speed then I'm supposed to be getting. I am getting about 198 MH/s and the average for my cards looks to be about 210 MH/s. Any help or info would be greatly appreciated!! Current SMOS Config- -epool us1.ethermine.org:4444 -ewal 0x7c17825D0879cd436f58d6E1EcfDe510ED793Da9 -epsw x Also, Should I be dual mining? Just not sure how to write the Config text for SMOS with dual mining. Thanks a ton!!!! Nick Mullen
|
|
|
|
|
|
|
|
|
I HATE TABLES I HATE TABLES I HA(╯°□°)╯︵ ┻━┻ TABLES I HATE TABLES I HATE TABLES
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Tandro
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 31, 2018, 06:12:58 PM |
|
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors. Dual mining different story, 1200-1300W PSU would be recommended. thanks, but i have 1800w look at my post. RYXES does not see that i have 1000w + 800w my problem is 'hangs on opencl call' and now i dont know where i have to search
|
|
|
|
nmullen559
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 31, 2018, 06:17:15 PM |
|
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors. Dual mining different story, 1200-1300W PSU would be recommended. thanks, but i have 1800w look at my post. RYXES does not see that i have 1000w + 800w my problem is 'hangs on opencl call' and now i dont know where i have to search If it is saying that for a certain GPU, you need to turn down your overclocking.
|
|
|
|
Tandro
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 31, 2018, 06:34:19 PM |
|
If it is saying that for a certain GPU, you need to turn down your overclocking.
i don't have overclocking, first i want that all cards are runing befor i do this
|
|
|
|
Razvan84
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 31, 2018, 08:24:02 PM |
|
Hey guys, I started mining early December. The information shared here is amazing - much to learn from all the info here. I have a 13xRx580 XFX 8gb rig which is dual mining at the moment ETH + DEC . Modded the bios and I have a steady 388/390Mhz ETH and 11600Mhz DECfor on all cards taking out around 2500w Since I upgraded claymore to ver 10.06 the graph became stable but check this out https://imgur.com/a/aixWa
|
|
|
|
mylove90
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 31, 2018, 09:44:13 PM |
|
Today i lost 1 hours of Dual mining Eth/Pascal using your miner with Multi pool miner I was left off with a 5 mb log which i think is too huge to be normal for a miner log I can see that it generated shares but these shares wasn't reported on neither mining pool hub nor nicehash Please have a look into it and tell me what was wrong with it https://drive.google.com/file/d/1MVNPss8RihjRLkZhbqigGerArMuUVDya/view?usp=sharingThanks in Advance Best Regards
|
|
|
|
RYXES
Member
Offline
Activity: 140
Merit: 10
Merit me or don't.
|
|
January 31, 2018, 10:14:55 PM |
|
UPDATE: I'm working on two new algorithms for dual, new version will be available in about a week, also I will reduce devfee for dual mode.
Excellent news. Looking forward to this as I have been reluctant to switch back to Dual.
|
Merit me or don't.
|
|
|
ccminer.net
|
|
January 31, 2018, 10:32:46 PM |
|
get this error when I try to launch the last version of the miner in ubuntu 17.10 ./ethdcrminer64: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
Any help?
|
|
|
|
Ahrcoin
Newbie
Offline
Activity: 71
Merit: 0
|
|
January 31, 2018, 10:49:20 PM |
|
Excited for the new dual coins!
|
|
|
|
ccminer.net
|
|
January 31, 2018, 10:54:27 PM |
|
get this error when I try to launch the last version of the miner in ubuntu 17.10 ./ethdcrminer64: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
Any help? Try reinstallin your drivers, or does it work with previous versions? yes but was a previous version both of the miner and the OS
|
|
|
|
Call_Me_Bambi
|
|
February 01, 2018, 01:20:04 AM |
|
Is there a pool that charges less than 1%? There are some and they have running costs. Server, software and so on. Claymore doesn't have. This has nothing to do with communism. I think a lot of people aren't aware that he makes so much money. So if you could disable developer fee and have the same hashrate, that would be ok. A lot of people wouldn't care if dev fee is the default option, so he still had enough money. Name a pool under 1%. Claymore has running costs, testing, adding new features, maintaining compatibility with drivers, the list goes on. Obviously you are not a software developer at all, because you are so uninformed it is absolutely stunning. Don't use the software. You aren't worthy. There are many pools with fees under 1%, I can't remember them all but two that come to mind are etn.spacepools.org with only 0.1% fees and miningpoolhub.com with only 0.9% fees. For choice of coins, functions and support I'd go for miningpoolhub.
|
|
|
|
bithead007
Newbie
Offline
Activity: 22
Merit: 0
|
|
February 01, 2018, 01:24:08 AM |
|
Hi everybody, first, sry for my bad english writing.
i have a mining rig, my components:
4x gigabyte rx 570 4g 2 of them with 1140 2030 and 2 with 1140 2050 @ 850mv the rig works very well, i got 114 MH/s "28.5" eth 540w from the wall i use 2 600w powersupplys, an celeron cpu and a gigabyte mainboard with 4gb ram. my os is win10 pro an it is setup for mining.
yesterday i install the new claymore miner, the description tells me i can dual mine without a hashratedrop @ eth. i try this with eth+dcr, but wenn i start mining my eth hashrate drops zu 17MH/s
has anyone try this or a idea?
Play with the -dcri setting maybe? How did you mod the BIOS to get an RX 570 card to hash at 28.5? I only get about 24. Thanks, CJ
|
|
|
|
bithead007
Newbie
Offline
Activity: 22
Merit: 0
|
|
February 01, 2018, 01:35:35 AM |
|
Is there a pool that charges less than 1%? There are some and they have running costs. Server, software and so on. Claymore doesn't have. This has nothing to do with communism. I think a lot of people aren't aware that he makes so much money. So if you could disable developer fee and have the same hashrate, that would be ok. A lot of people wouldn't care if dev fee is the default option, so he still had enough money. Name a pool under 1%. Claymore has running costs, testing, adding new features, maintaining compatibility with drivers, the list goes on. Obviously you are not a software developer at all, because you are so uninformed it is absolutely stunning. Don't use the software. You aren't worthy. There are many pools with fees under 1%, I can't remember them all but two that come to mind are etn.spacepools.org with only 0.1% fees and miningpoolhub.com with only 0.9% fees. For choice of coins, functions and support I'd go for miningpoolhub. Thanks for the pointers. Very useful outcome to an otherwise dubious post. :_) CJ
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
February 01, 2018, 02:41:32 AM |
|
Hi I'm having problems with a gpu msi armor rx 580 8Gb, after a few hours of mining seems to stop reading the temperature well, and probe to use another raiser and remains the same. Will the gpu be wrong? attached capture regards
|
|
|
|
xeridea
|
|
February 01, 2018, 03:06:25 AM |
|
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors. Dual mining different story, 1200-1300W PSU would be recommended. thanks, but i have 1800w look at my post. RYXES does not see that i have 1000w + 800w my problem is 'hangs on opencl call' and now i dont know where i have to search Ya I saw you have 1800w, I was just correcting RYXES. If a rig is unstable like you say, it may be risers or motherboard. Look at logs see if it is one GPU in particular and try changing riser. Can also unhook all but one, and incrementally test. In Windows can use HwInfo64 to check for mem errors and other things. I had a Biostar TB250 mobo would throw lots of PCIE errors, resulting in about 20 reboots per day. Replaced mobo, rock solid. I don't know if there is a Linux tool. My experience with Linux has been figuring out the desktop is a PITA, and VMs/Server for webdev work.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
muzuca
Member
Offline
Activity: 182
Merit: 13
|
|
February 01, 2018, 05:53:29 AM |
|
I'm always get error with devfee, my rigs hang out and restart Feeling tired I had this problem once, try to specifying the option "-allpools 1“ on start.bat.
|
|
|
|
uranus13
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 01, 2018, 07:48:33 AM |
|
I'm always get error with devfee, my rigs hang out and restart Feeling tired I had this problem once, try to specifying the option "-allpools 1“ on start.bat. Thanks for your reply I set "allpools 1" and "allcoins 1" but rig remain stuck at devfee, I'm trying to set "nofee 1" and get terrible hashrate, 25.5mh/s with rx470 Sorry I'm not good at english
|
|
|
|
Asgaroth
Newbie
Offline
Activity: 49
Merit: 0
|
|
February 01, 2018, 09:02:40 AM |
|
@claymore Any possibility you may consider doing a miner for x16r?
|
|
|
|
drawer
Newbie
Offline
Activity: 60
Merit: 0
|
|
February 01, 2018, 09:19:34 AM |
|
i heard from someone that anyone who use claymore up do 10.5 need to update do 10.6 ,what's the cause
|
|
|
|
max246
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 01, 2018, 09:25:34 AM |
|
I got my miner crashing few times over the day with the message "Miner has stop working"
I cant see any errors, I do get sometimes freeze, I have no idea why, I have 4GB ram on the pc, 2 raiser , which I already swap to new one.
I got 580 OC edition, with default settings.
Anyone got the same issue?
|
|
|
|
|