zumili
Newbie
Offline
Activity: 24
Merit: 0
|
|
February 01, 2018, 09:47:28 AM |
|
So just in case somebody want to mine with their rig ETH only on two different pools, here is the content of my batch file (start_eth_nanopool_noobpool.bat): setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 start "" "EthDcrMiner64.exe" -epool noobpool.com:8008 -ewal 0x0cdb48b05f63b3d3f351523eb7e757e9c640518a -epsw x -eworker rig1 -ftime 10 -mode 1 -r 1 -dcri 1,1,1 -cclock 1200,1100,1200 -cvddc 885,890,875 -mclock 2100,2100,2150 -mvddc 885,885,875 -tt 57,57,57 -fanmin 42,42,42 -tstop 78,78,78 -di 012 -altnum 2 timeout /t 10 /nobreak start "" "EthDcrMiner64.exe" -epool eth-eu1.nanopool.org:9999 -ewal 0x0cdb48b05f63b3d3f351523eb7e757e9c640518a.rig1/email -epsw x -ftime 10 -mode 1 -r 1 -dcri 1,1,1,1 -cclock 1200,1200,1200,1200 -cvddc 875,875,875,875 -mclock 2100,2100,2100,2150 -mvddc 895,908,899,875 -tt 57,57,57,57 -fanmin 42,42,42,42 -tstop 78,78,78,78 -di 3456 -altnum 2 -mport 3334 This batch-file gets started from Windows 10 Autostart. The first 3 GPUs are used to mine on noobpool (no mining fees but high transmission fees!!) and the other 4 GPUs are used to mine on nanopool (also take care if you use this pool). The command timeout /t 10 /nobreak waits for 10 seconds before the second instance gets opened. Another thing you have to take care about are the risers. I bought 6 "YIKESHU" Risers (blue, 6-Pin-PCI-E on the riser) from Amazon and there are all crap! One out of these 6 was completely defect. But the other produce massive problems during the mining. All GPUs where I used these riser, got randomly stuck during the mining. After I changed all of these "YIKESHU" riser to "Ptsaying" risers, the GPUs don't produce errors any more and I was also able to let the GPU run faster with less voltage with these new riser. So if you got massive problems, the first thing you should do is down-clock your GPUs a bit and if this will not help, you must change your risers! Risers which also work fine in my rig are the "ELEGIANT" risers which I also got from amazon.
|
|
|
|
|
|
|
|
In order to achieve higher forum ranks, you need both activity points and merit points.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Asgaroth
Newbie
Offline
Activity: 49
Merit: 0
|
|
February 01, 2018, 09:50:47 AM |
|
i heard from someone that anyone who use claymore up do 10.5 need to update do 10.6 ,what's the cause Have a look at the 1st post in this thread, he has a change log there and it will tell you what the changes are between 10.5 and 10.6.
|
|
|
|
drawer
Newbie
Offline
Activity: 60
Merit: 0
|
|
February 01, 2018, 10:30:14 AM |
|
i heard from someone that anyone who use claymore up do 10.5 need to update do 10.6 ,what's the cause Have a look at the 1st post in this thread, he has a change log there and it will tell you what the changes are between 10.5 and 10.6. ok i/ve read: "Latest version is v10.6: - fixed critical issue in remote management feature (attacker could crash miner even in read-only mode)." its about -mport option yes? so if somebody didn't used that option, older versions are safe ? correct ?
|
|
|
|
Jan2017
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 01, 2018, 10:44:32 AM |
|
@ zumili: thanks for the tip about the risers! I use the YIKESHU now, and my rigs are driving me crazy with their total unpredictable behavior. I will try the PTSAYING and see if this gives improvement.
|
|
|
|
willi9974
Legendary
Offline
Activity: 3430
Merit: 2662
Escrow Service
|
|
February 01, 2018, 11:01:46 AM |
|
i use a ASROCK H110 BTC Pro+ Mainboard with AMD Cards and Claymore Miner on SimpleMiningOS. How can i see which GPUx Card is which PCIE Port on the Mainboard, for debug or tuning the cards...?
|
. .BLACKJACK ♠ FUN. | | | ███▄██████ ██████████████▀ ████████████ █████████████████ ████████████████▄▄ ░█████████████▀░▀▀ ██████████████████ ░██████████████ █████████████████▄ ░██████████████▀ ████████████ ███████████████░██ ██████████ | | CRYPTO CASINO & SPORTS BETTING | | │ | | │ | ▄▄███████▄▄ ▄███████████████▄ ███████████████████ █████████████████████ ███████████████████████ █████████████████████████ █████████████████████████ █████████████████████████ ███████████████████████ █████████████████████ ███████████████████ ▀███████████████▀ ███████████████████ | | .
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 01, 2018, 11:18:19 AM |
|
i use a ASROCK H110 BTC Pro+ Mainboard with AMD Cards and Claymore Miner on SimpleMiningOS. How can i see which GPUx Card is which PCIE Port on the Mainboard, for debug or tuning the cards...?
Someone should remove your Legendary status!
|
|
|
|
Jbodz83
Newbie
Offline
Activity: 124
Merit: 0
|
|
February 01, 2018, 11:30:59 AM |
|
i use a ASROCK H110 BTC Pro+ Mainboard with AMD Cards and Claymore Miner on SimpleMiningOS. How can i see which GPUx Card is which PCIE Port on the Mainboard, for debug or tuning the cards...?
Someone should remove your Legendary status! Lol so harsh bro haaha!
|
|
|
|
willi9974
Legendary
Offline
Activity: 3430
Merit: 2662
Escrow Service
|
|
February 01, 2018, 12:07:31 PM |
|
You are so funny
|
. .BLACKJACK ♠ FUN. | | | ███▄██████ ██████████████▀ ████████████ █████████████████ ████████████████▄▄ ░█████████████▀░▀▀ ██████████████████ ░██████████████ █████████████████▄ ░██████████████▀ ████████████ ███████████████░██ ██████████ | | CRYPTO CASINO & SPORTS BETTING | | │ | | │ | ▄▄███████▄▄ ▄███████████████▄ ███████████████████ █████████████████████ ███████████████████████ █████████████████████████ █████████████████████████ █████████████████████████ ███████████████████████ █████████████████████ ███████████████████ ▀███████████████▀ ███████████████████ | | .
|
|
|
|
bl1nd
Jr. Member
Offline
Activity: 53
Merit: 1
|
|
February 01, 2018, 12:27:34 PM |
|
UPDATE: I'm working on two new algorithms for dual, new version will be available in about a week, also I will reduce devfee for dual mode.
Music for my ears
|
|
|
|
bithead007
Newbie
Offline
Activity: 22
Merit: 0
|
|
February 01, 2018, 01:05:44 PM |
|
So just in case somebody want to mine with their rig ETH only on two different pools, here is the content of my batch file (start_eth_nanopool_noobpool.bat): setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 start "" "EthDcrMiner64.exe" -epool noobpool.com:8008 -ewal 0x0cdb48b05f63b3d3f351523eb7e757e9c640518a -epsw x -eworker rig1 -ftime 10 -mode 1 -r 1 -dcri 1,1,1 -cclock 1200,1100,1200 -cvddc 885,890,875 -mclock 2100,2100,2150 -mvddc 885,885,875 -tt 57,57,57 -fanmin 42,42,42 -tstop 78,78,78 -di 012 -altnum 2 timeout /t 10 /nobreak start "" "EthDcrMiner64.exe" -epool eth-eu1.nanopool.org:9999 -ewal 0x0cdb48b05f63b3d3f351523eb7e757e9c640518a.rig1/email -epsw x -ftime 10 -mode 1 -r 1 -dcri 1,1,1,1 -cclock 1200,1200,1200,1200 -cvddc 875,875,875,875 -mclock 2100,2100,2100,2150 -mvddc 895,908,899,875 -tt 57,57,57,57 -fanmin 42,42,42,42 -tstop 78,78,78,78 -di 3456 -altnum 2 -mport 3334 This batch-file gets started from Windows 10 Autostart. The first 3 GPUs are used to mine on noobpool (no mining fees but high transmission fees!!) and the other 4 GPUs are used to mine on nanopool (also take care if you use this pool). The command timeout /t 10 /nobreak waits for 10 seconds before the second instance gets opened. Another thing you have to take care about are the risers. I bought 6 "YIKESHU" Risers (blue, 6-Pin-PCI-E on the riser) from Amazon and there are all crap! One out of these 6 was completely defect. But the other produce massive problems during the mining. All GPUs where I used these riser, got randomly stuck during the mining. After I changed all of these "YIKESHU" riser to "Ptsaying" risers, the GPUs don't produce errors any more and I was also able to let the GPU run faster with less voltage with these new riser. So if you got massive problems, the first thing you should do is down-clock your GPUs a bit and if this will not help, you must change your risers! Risers which also work fine in my rig are the "ELEGIANT" risers which I also got from amazon. What's the issue you ran into with Nanopool? Thanks for the posting. CJ
|
|
|
|
Tandro
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 01, 2018, 01:11:51 PM |
|
Ya I saw you have 1800w, I was just correcting RYXES.
If a rig is unstable like you say, it may be risers or motherboard. Look at logs see if it is one GPU in particular and try changing riser. Can also unhook all but one, and incrementally test. In Windows can use HwInfo64 to check for mem errors and other things. I had a Biostar TB250 mobo would throw lots of PCIE errors, resulting in about 20 reboots per day. Replaced mobo, rock solid. I don't know if there is a Linux tool. My experience with Linux has been figuring out the desktop is a PITA, and VMs/Server for webdev work.
thanks, first i change all riser, but .... ok next i try my ga-990fxa board.
|
|
|
|
Amkolino
Newbie
Offline
Activity: 42
Merit: 0
|
|
February 01, 2018, 01:20:26 PM |
|
Hey guys, sometimes one of my rigs just stops working.
The mining cmd window is there, but doesn't run further.
Windows and Remote Tool are fine and running, so I can restart easily, but what's the issue here?
I would like crashes, then my pc auto reboots (reboot.bat -r 1 option) --> When this cmd freeze happens, im not mining and not restarting, that sucks :-/
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
February 01, 2018, 01:35:18 PM |
|
I thought this problem with claymore's eth miner and ethermine.org was solved but again today (( eu server constant dag regeneration (( Anyone with the same problem?
|
|
|
|
pszabee
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 01, 2018, 02:00:45 PM |
|
I thought this problem with claymore's eth miner and ethermine.org was solved but again today (( eu server https://i.imgur.com/d9niBJw.pngconstant dag regeneration (( Anyone with the same problem? Same here. i had this error in the morning too. Switched back to an old version.
|
|
|
|
knohult
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 01, 2018, 02:17:28 PM Last edit: February 01, 2018, 02:35:32 PM by knohult |
|
Latest version is v10.6:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal MYKEY.MYPC/MYEMAIL -epsw x -mode 1 -ftime 10 -wd 0 -ethi 7 -r 20 I use this but the miner just kills itself after everything between 5-60 minutes. I have tried this too, it seems to be a little bit more stable but still closing: epsw x -mode 1 -ftime 10 -ethi 4 -wd 0 -r 40 I have uninstalled Malwarebytes antimalware, added exceptions to windows defender and set it inactive, made exceptions to Webroot security without results. I have a GTX 970 black edition to start with. Computing mode, no difference when overclocked or standard clocked. My solution for the moment is to reboot the computer every 40 minutes and set it to autostart. Not very good but it will mine. Any other ideas? I went from version 10.0 to 10.6 too without any better results. Last lines in log 1 15:27:30:647 4044 parse packet: 38 15:27:30:648 4044 ETH: Authorized 15:27:30:649 4044 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 15:27:30:649 4044 remove first packet 243 15:27:30:650 4044 new buf size: 243 15:27:30:651 4044 parse packet: 242 15:27:30:652 4044 ETH: job changed 15:27:30:652 4044 new buf size: 0 15:27:30:698 4044 got 243 bytes 15:27:30:698 4044 buf: {"jsonrpc":"2.0","id":0,"result":["0x02abe34e119e825aa5230bb07216d337236d3cabdf042ebf57e573161e516d9b","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]} 15:27:30:699 4044 parse packet: 242 15:27:30:700 4044 ETH: job is the same 15:27:30:700 4044 new buf size: 0 15:27:30:720 21bc Setting DAG epoch #167... 15:27:32:380 21bc Setting DAG epoch #167 for GPU0 15:27:32:383 21bc Create GPU buffer for GPU0 Last lines in log 2 15:27:12:034 3f84 parse packet: 242 15:27:12:035 3f84 ETH: job changed 15:27:12:035 3f84 new buf size: 0 15:27:12:036 3f84 ETH: 02/01/18-15:27:12 - New job from eth-eu1.nanopool.org:9999 15:27:12:037 3f84 target: 0x000000006df37f67 (diff: 10000MH), epoch 167(2.30GB) 15:27:12:127 3f84 ETH - Total Speed: 10.052 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04 15:27:12:297 3f84 ETH: GPU0 10.052 Mh/s 15:27:15:601 2fa0 em hbt: 0, fm hbt: 16, 15:27:15:603 2fa0 watchdog - thread 0 (gpu0), hb time 250 15:27:15:604 2fa0 watchdog - thread 1 (gpu0), hb time 78 The memory speed will not change in Afterburner, it stays pretty low on 3004MHz. https://imgur.com/hnsi0RO
|
|
|
|
Victorio
|
|
February 01, 2018, 02:57:08 PM |
|
For -ethi see the first page.
i f I set -ethi 7, will this change my hash rate too? or maybe for stability -ethi 9?
I have reboots every 3 to 12 hours.
The higher ETH mining intensity, the more consistent effective hashrate you'll get. If your rig reboots that often, maybe your cards are underpowered?
|
|
|
|
Victorio
|
|
February 01, 2018, 03:06:29 PM |
|
But if use 2 different site pools for dual mining or use 1 site pool for dual mining , both are equal or i.e. 1% for eth pool and 1% for dcr/sia/other pool (apart from dev fee) ??
or if I dual mine using lets say same pool e.g. nanopool ETH+SIA then will I pay less pool fee i.e. only 1 time 1% ??
All mentions - purely arbitrary, purely theoretical calculations. Solo mining: Claymore takes 1%, you are left with 99% ETH PoW time (effort) Ethermine pool takes 1% of your 99% ETH effort Ideally, you should be left with 98% Dual mining: Claymore takes 2%, 98% left, can be truncated to 95% (dual gives more incorrect and stale shares) Ethermine takes 1% of your 95% You are left with ~94% Siamining takes 3% of your Sia effort, Claymore takes none PS: 1. Siacoin is not anymore viable for GPU mining (difficulty and net hashrate skyrocketed). 2. Luck factor makes the effective hashrate fluctuate 10-15% up and down. 3. For AMD RX, optimal dcri values can boost the ETH hashrate by 2-3%. However, incorrect share ratio tends to be about 1-2%, so it levels out. -dcri 85
This is your problem. Too high dual mining intensity crashes the GPUs.
|
|
|
|
Grinner888
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 01, 2018, 06:07:02 PM |
|
anyone having problems running 12 gpus? only gpu # 0 runs at max hashrate while the other 11 cards run at 80% of the max hash rates. after running for a few hours sometimes they all run at max hashrate and sometimes not. sometimes when i close claymore then run it again, all 12 cards get max hash rate, but sometimes. relaunching claymore just crashes the system and reboots it.
|
|
|
|
willi9974
Legendary
Offline
Activity: 3430
Merit: 2662
Escrow Service
|
|
February 01, 2018, 08:08:05 PM |
|
I have a stable System with 13 cards
13 GPUs 370 MHs GPU: 1100,1100,1150,1150,1250,1250,1150,1250,1150,1150,1150,1150,1100 Memory: 1900,1900,2000,2000,2150,2150,2000,2150,2000,2000,2000,2000,1900 Stage: 1 Undervolting: 880 1900 Watt
|
. .BLACKJACK ♠ FUN. | | | ███▄██████ ██████████████▀ ████████████ █████████████████ ████████████████▄▄ ░█████████████▀░▀▀ ██████████████████ ░██████████████ █████████████████▄ ░██████████████▀ ████████████ ███████████████░██ ██████████ | | CRYPTO CASINO & SPORTS BETTING | | │ | | │ | ▄▄███████▄▄ ▄███████████████▄ ███████████████████ █████████████████████ ███████████████████████ █████████████████████████ █████████████████████████ █████████████████████████ ███████████████████████ █████████████████████ ███████████████████ ▀███████████████▀ ███████████████████ | | .
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
February 01, 2018, 09:18:41 PM |
|
I thought this problem with claymore's eth miner and ethermine.org was solved but again today (( eu server constant dag regeneration (( Anyone with the same problem? No, but I do find your stats interesting in the following way ... I've tuned my 580 to give me an average DAG creation time of 4200ms, and my hash rate is ~ 30.7MH. If I detune my cards, my DAG creation takes longer and my hash rate goes down. In other words, they move in sync with the assumption being that a higher memory bandwidth from tuning gives me faster DAG creation and a high hash rate. Your DAG creation is at about 6500ms, yet your hash rate is is exceptionally high. Are you running 580's as well? Just a curiosity.
|
|
|
|
|