NotFuzzyWarm
Legendary
Offline
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 02:51:26 AM |
|
Repair finished, R4B4 is being sent back to Hoth... Fingers crossed all is good!
Well that didn't take long... R4 got back to the Hoth mine and after a few weeks has dropped a board (again) and is running at 1/2 speed. Lame. ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) I'll bet it is the top board that's out, right? My gimpy batch-6 I got had a board (top one) crap out after just 24hrs. Since I'll (eventually) have it fixed in CO just been happy with it running @4.7TH and only pulling 430w. No way for me to tell since since it's with Alan at cryptoboreas in their Hoth mines... I'll just let it run at 1/2 speed for now. Just had the POS shipped back and forth to the Empire's apparently useless repair facility. Such suckitude it boggles the mind! Can't access its GUI using the Host-provided VPN? Should be part of any Hosting package... On the batch-6 at least, the top board reports as chain-8, the bottom as chain-7. God forbid BM just swap cables connectionsso the top/bottom boards report as top/bottom on the GUI ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
GWhisper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 07:08:22 AM |
|
Repair finished, R4B4 is being sent back to Hoth... Fingers crossed all is good!
Well that didn't take long... R4 got back to the Hoth mine and after a few weeks has dropped a board (again) and is running at 1/2 speed. Lame. ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Well that sux. One of my R4's has already been returned twice, after the first repair it lasted about a week and now since the 2nd it's been hashing away nicely for 35 days - touch wood it'll continue.
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 02:11:33 PM |
|
Can't access its GUI using the Host-provided VPN? Should be part of any Hosting package... On the batch-6 at least, the top board reports as chain-8, the bottom as chain-7. God forbid BM just swap cables connectionsso the top/bottom boards report as top/bottom on the GUI ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) I only got a couple units there, so no. If you have a bunch it can be set up with that certainly. Either way it's already been sent out and back once for only a few weeks worth of full speed hashing. Not very cost effective... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
CarlosVR2
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2017, 03:11:30 PM |
|
Greetings fellow miners, I have been waiting for a while to buy more R4s as I really appreciate the silent operation and the two R4 units I own have been working properly for several months. However, time passes and there are no news from Bitmain about new R4 batches. I read in recent posts of this thread people with defective R4s have been requested to swap to T9 units. Does that mean Bitmain is not going to produce R4s anymore? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Thanks for your comments!
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2017, 01:50:05 PM |
|
Repair finished, R4B4 is being sent back to Hoth... Fingers crossed all is good!
Well that didn't take long... R4 got back to the Hoth mine and after a few weeks has dropped a board (again) and is running at 1/2 speed. Lame. ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) And there goes the second board - now seeing 0 hash poolside. I also have an S9 there so it's not a connection or node problem... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I've requested a reboot and we'll see if anything happens. A big harrumph to all this unreliable crap! ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Edit - Oh, sure, I still got a few months of warranty left, but at this rate you LOSE money getting it fixed and you LOSE money if you don't! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
lightfoot
Legendary
Offline
Activity: 3150
Merit: 2257
I fix broken miners. And make holes in teeth :-)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2017, 02:04:29 PM |
|
The way to win is to donate it to me so I can figure out what's going wrong :-) Then I can tell everyone else how to fix these things.
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2017, 05:22:09 PM |
|
Looks like it was a failover-failed-to-failback scenario. Still only 1/2 hash but that beats 0, and I got until end of June to decide if I want to warranty it again. Much like elections, it's a matter of picking the least objectionable option.
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2017, 10:55:14 AM |
|
@VRobb,
as always, our hosting option, you do not have to worry about dead units or broken units as it be repaired or replaced at site if it is damaged or broken while in our hosting! Fully protected option is $60/kw, string attached is shipout is only after unit is not profitable to hash. (hash to the ash option, and probably in those senario, hosting fee at that time may be even lower to hash a bit longer by migrating to lower grade hosting option we have to keep the unit working longer)
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8461
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2017, 12:39:28 PM |
|
The way to win is to donate it to me so I can figure out what's going wrong :-) Then I can tell everyone else how to fix these things.
I have a ½ dead one are you in the usa?
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2017, 03:19:10 PM |
|
@VRobb,
as always, our hosting option, you do not have to worry about dead units or broken units as it be repaired or replaced at site if it is damaged or broken while in our hosting! Fully protected option is $60/kw, string attached is shipout is only after unit is not profitable to hash. (hash to the ash option, and probably in those senario, hosting fee at that time may be even lower to hash a bit longer by migrating to lower grade hosting option we have to keep the unit working longer)
Definitely something to consider when I increase my mining, but the 1/2 running R4B4 of concern is currently up in the great white north, and as such will either stay there or head on back to another warranty repair in the near future if the hosting site sends another batch of units for repair (which is both fortunately and unfortunately likely!).
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
lightfoot
Legendary
Offline
Activity: 3150
Merit: 2257
I fix broken miners. And make holes in teeth :-)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 21, 2017, 01:19:25 AM |
|
The way to win is to donate it to me so I can figure out what's going wrong :-) Then I can tell everyone else how to fix these things.
I have a ½ dead one are you in the usa? Actually I am, and I've always been interested in seeing what makes bitmain tick. I'll send over the address in a PM. Thanks! C
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 03:57:16 AM Last edit: April 25, 2017, 04:29:23 AM by VRobb |
|
Well my faulty R4 is now fixed and on the way back to my place. Fedex has it in Cologne (Germany) at the moment. No details about what was repaired though.
At least they fixed your R4. They sent back a broken R4 that would not hash. I resent it back for repair and now they said they can't replace it because they don't have any more R4 units. They want me to pay some BTC to get as a replacement a T9. It's faster but also louder. Terrible customer service. Try to get a swap without additional payment. The R4 are doomed. After a second failure of one of the hash boards (with requisite cost of sending R4 out once for repair already) I have been offered the swap of R4 for T9 if I send it back again on my dime. Yes, I already asked to have shipping back paid but to no avail. Not sure how to proceed with this... on the one hand I like the efficiency of my R4 which is unmatched. But it's very flaky and unreliable operating history is rather lame. Thoughts?
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 10:54:43 AM |
|
Well my faulty R4 is now fixed and on the way back to my place. Fedex has it in Cologne (Germany) at the moment. No details about what was repaired though.
At least they fixed your R4. They sent back a broken R4 that would not hash. I resent it back for repair and now they said they can't replace it because they don't have any more R4 units. They want me to pay some BTC to get as a replacement a T9. It's faster but also louder. Terrible customer service. Try to get a swap without additional payment. The R4 are doomed. After a second failure of one of the hash boards (with requisite cost of sending R4 out once for repair already) I have been offered the swap of R4 for T9 if I send it back again on my dime. Yes, I already asked to have shipping back paid but to no avail. Not sure how to proceed with this... on the one hand I like the efficiency of my R4 which is unmatched. But it's very flaky and unreliable operating history is rather lame. Thoughts? If you can deal with the extra noise and extra electricity cost, I would go with the T9.
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:01:38 PM |
|
If you can deal with the extra noise and extra electricity cost, I would go with the T9.
The sick R4 is in a DC with my S9 so noise isn't an issue in this case. Just another expensive shipping payment and then mining delay, what fun!!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2017, 02:49:45 PM |
|
Whoah, I almost lost other hash board today in my R4, batch 4. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) It disappeared completely, only the board connected to J7 was visible at the status page. Turned out that changing communication cable in the controller from J8 to J6 helped, at least that got it running ok again.
|
|
|
|
qctechno
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2017, 03:46:40 PM |
|
I inspected my R4B1 today. I find some DC plug who overheated from too much current. I use a EVGA G2 1300W with good sized cables. It was running at stock speed 600Mhz. Down clocked to 550Mhz to be safe.
POoooOOOooor design, Bitmain can't size a DC plug properly ...
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2017, 05:22:34 PM Last edit: July 24, 2017, 06:55:36 PM by VRobb |
|
If you can deal with the extra noise and extra electricity cost, I would go with the T9.
The sick R4 is in a DC with my S9 so noise isn't an issue in this case. Just another expensive shipping payment and then mining delay, what fun!! Well after much delay my sick droid R4B4 is back at the Empire for scrapping. After some polite back and forth regarding the issues with the R4 I was promised "just this one time" an S9, instead of a T9, for swap once returned on my dime. It (R4B4) has just arrived today.
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2017, 06:01:34 PM |
|
If you can deal with the extra noise and extra electricity cost, I would go with the T9.
The sick R4 is in a DC with my S9 so noise isn't an issue in this case. Just another expensive shipping payment and then mining delay, what fun!! Well after much delay my sick droid R4B4 is back at the Empire for scrapping. After some polite back and forth regarding the issues with the R4 I was promised "just this one time" an S9, instead of a T9, for swap once returned on my dime. It has just arrived today. Wow, that's actually then quite in a good way handled situation after all?
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2017, 06:11:07 PM |
|
We'll see...! Once an S9 arrives to the mines at Hoth then I'll be fully convinced; but they did promise such and I will take them at their word.
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
Evan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2017, 06:23:56 PM |
|
@VRobb,
as always, our hosting option, you do not have to worry about dead units or broken units as it be repaired or replaced at site if it is damaged or broken while in our hosting! Fully protected option is $60/kw, string attached is shipout is only after unit is not profitable to hash. (hash to the ash option, and probably in those senario, hosting fee at that time may be even lower to hash a bit longer by migrating to lower grade hosting option we have to keep the unit working longer)
talk to me I am getting upset at 2 months of time of my r4 being away from me.
|
I am poor, but i do work for Coin ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
|
|
|
|