mufa23
Legendary
Offline
Activity: 1022
Merit: 1001
I'd fight Gandhi.
|
|
March 22, 2013, 12:30:35 PM |
|
Your balance should be good to go now. There were a handful of people (about that didn't get accounted properly due to only doing PPS and never doing DGM. I corrected the error and updated the accounts with the PPS information. Actually, I'm still having issues. Ever since the problem, my "Confirmed BTC" balance was reset. I had some a little BTC in there. And my total "Paid Out" has been rolled back. I'll PM you with the details. I'd prefer not to have my personal details open to the public.
|
Positive rep with: pekv2, AzN1337c0d3r, Vince Torres, underworld07, Chimsley, omegaaf, Bogart, Gleason, SuperTramp, John K. and guitarplinker
|
|
|
wogaut
Donator
Sr. Member
Offline
Activity: 448
Merit: 250
|
|
March 22, 2013, 08:38:06 PM |
|
Yes, the "Paid out" amount is incorrect for me too. This was a nice feature to have.
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 23, 2013, 03:32:51 AM |
|
You should be fixed Wogaut.
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
wogaut
Donator
Sr. Member
Offline
Activity: 448
Merit: 250
|
|
March 24, 2013, 12:55:48 AM |
|
You should be fixed Wogaut.
Looking good, thank you!
|
|
|
|
fuuka
Newbie
Offline
Activity: 26
Merit: 0
|
|
March 24, 2013, 01:53:42 AM |
|
Paying out by Dwolla doesn't seem to be working. No transaction shows up and no amount is deducted from my confirmed BTC balance.
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 24, 2013, 03:12:18 AM |
|
Dwolla payout should work now.
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
March 24, 2013, 12:05:34 PM |
|
The pps rate still shows 0.00000490
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
desol
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 24, 2013, 04:01:56 PM |
|
Inaba, would you mind checking in on the EMC bug report forum? I posted over there a few times last week and then happened on this thread where you are aware of the payout and other issues caused by last weeks problem and have corrected some accounts. In my case, about 9 hours of US3 work disappeared, which is no big deal but it would be nice if you could check in on the EMC site forums every so often. Could you reset my desol totals? --thanks
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 25, 2013, 03:26:05 AM |
|
You should be good to go now, Desol.
Goxed: The rate was correct when I looked at it, are you still seeing the incorrect rate?
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 26, 2013, 03:24:48 PM |
|
Try it now... the stupid 0.8.1 patches are not good and I've backed them out. This whole forced upgrade of the network to 0.8.1 is a complete botch job and an unmitigated disaster.
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
The00Dustin
|
|
March 26, 2013, 03:33:14 PM |
|
Try it now... the stupid 0.8.1 patches are not good and I've backed them out. This whole forced upgrade of the network to 0.8.1 is a complete botch job and an unmitigated disaster. Just out of curiosity, why can't you apply the workaround instead, or test for the remaining 45+ days until it really matters on an isolated instance?
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 26, 2013, 04:28:19 PM |
|
Because Gavin wants it pushed out NOW NOW NOW instead of giving adequate time for testing and deployment.
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
March 27, 2013, 12:30:49 AM |
|
You should be good to go now, Desol.
Goxed: The rate was correct when I looked at it, are you still seeing the incorrect rate?
It didn't update the moment difficulty adjusted. I tried refreshing a few times.Will check during the next diff update.
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
March 27, 2013, 09:54:13 AM |
|
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
March 27, 2013, 01:23:25 PM |
|
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 27, 2013, 02:24:02 PM |
|
us1 should be responding now. People do have us2 and us3 set as backups right?
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
mufa23
Legendary
Offline
Activity: 1022
Merit: 1001
I'd fight Gandhi.
|
|
March 27, 2013, 02:56:58 PM |
|
People do have us2 and us3 set as backups right?
I tried setting up backup pools in my "pools" config for BAMT, but it ended up making BAMT reboot itself constantly. Had to shutdown one of my rigs and reinstall the OS. I tried following the instructions it gave, but it didn't work out. Needless to say, I have all of my miners pointed to us1, and they didn't mine much last night. This is what I tried using back then. Any tips would be appreciated. http://mufa23_XXX:X@us1.eclipsemc.com:8337/,10,60,http://mufa23_XXX:X@us2.eclipsemc.com:8337/,10,60,http://mufa23_XXX:X@us3.eclipsemc.com:8337/,10,60
|
Positive rep with: pekv2, AzN1337c0d3r, Vince Torres, underworld07, Chimsley, omegaaf, Bogart, Gleason, SuperTramp, John K. and guitarplinker
|
|
|
aleksei
|
|
March 28, 2013, 07:31:07 AM |
|
Page 'Top Miners' is not available for anonymous users. Is this intentionally? I was sure it available for everyone.
|
|
|
|
Inaba (OP)
Legendary
Offline
Activity: 1260
Merit: 1000
|
|
March 28, 2013, 02:49:11 PM |
|
Yes, it's intentional. You must be logged in to see it.
Mufa: I'm not sure how the line should be configured in BAMT. Is there any reason you're still using BAMT? Are you still doing GPUs or are you on all FPGAs?
|
If you're searching these lines for a point, you've probably missed it. There was never anything there in the first place.
|
|
|
|