[1200 TH] EMC: 0 Fee DGM. Anonymous PPS. US & EU servers. No Registration!

[mufa23]

Your balance should be good to go now.  There were a handful of people (about that didn't get accounted properly due to only doing PPS and never doing DGM.  I corrected the error and updated the accounts with the PPS information.

Actually, I'm still having issues. Ever since the problem, my "Confirmed BTC" balance was reset. I had some a little BTC in there. And my total "Paid Out" has been rolled back. I'll PM you with the details. I'd prefer not to have my personal details open to the public.

[1713486291]

1713486291

[1713486291]

1713486291

[wogaut]

Yes, the "Paid out" amount is incorrect for me too. This was a nice feature to have. 

[Inaba]

You should be fixed Wogaut.

[wogaut]

You should be fixed Wogaut.

Looking good, thank you!

[fuuka]

Paying out by Dwolla doesn't seem to be working.  No transaction shows up and no amount is deducted from my confirmed BTC balance.

[Inaba]

Dwolla payout should work now.

[goxed]

The pps rate still shows 0.00000490   

[desol]

Inaba, would you mind checking in on the EMC bug report forum? I posted over there a few times last week and then happened on this thread where you are aware of the payout and other issues caused by last weeks problem and have corrected some accounts. In my case, about 9 hours of US3 work disappeared, which is no big deal but it would be nice if you could check in on the EMC site forums every so often. Could you reset my desol totals? --thanks

[Inaba]

You should be good to go now, Desol. 

Goxed: The rate was correct when I looked at it, are you still seeing the incorrect rate?

[ewibit]

something`s wrong:

Code:

[Getworks] => 4
   [Accepted] => 758
   [Rejected] => 4613
   [Discarded] => 21

and I have 0 H/s...

http://us2.eclipsemc.com:8337 Dead
http://us3.eclipsemc.com:8337 Dead

[Inaba]

Try it now... the stupid 0.8.1 patches are not good and I've backed them out.  This whole forced upgrade of the network to 0.8.1 is a complete botch job and an unmitigated disaster.

[The00Dustin]

Try it now... the stupid 0.8.1 patches are not good and I've backed them out.  This whole forced upgrade of the network to 0.8.1 is a complete botch job and an unmitigated disaster.

Just out of curiosity, why can't you apply the workaround instead, or test for the remaining 45+ days until it really matters on an isolated instance?

[Inaba]

Because Gavin wants it pushed out NOW NOW NOW instead of giving adequate time for testing and deployment.

[goxed]

You should be good to go now, Desol. 

Goxed: The rate was correct when I looked at it, are you still seeing the incorrect rate?

It didn't update the moment difficulty adjusted. I tried refreshing a few times.Will check during the next diff update.

[ewibit]

http://us1.eclipsemc.com:3333 Dead

[ocminer]

http://us1.eclipsemc.com:3333 Dead

+1

[Inaba]

us1 should be responding now.  People do have us2 and us3 set as backups right?

[mufa23]

People do have us2 and us3 set as backups right?

I tried setting up backup pools in my "pools" config for BAMT, but it ended up making BAMT reboot itself constantly. Had to shutdown one of my rigs and reinstall the OS. I tried following the instructions it gave, but it didn't work out.

Needless to say, I have all of my miners pointed to us1, and they didn't mine much last night.

This is what I tried using back then. Any tips would be appreciated.

Code:

http://mufa23_XXX:X@us1.eclipsemc.com:8337/,10,60,http://mufa23_XXX:X@us2.eclipsemc.com:8337/,10,60,http://mufa23_XXX:X@us3.eclipsemc.com:8337/,10,60

[aleksei]

Page 'Top Miners' is not available for anonymous users. Is this intentionally? I was sure it available for everyone.

[Inaba]

Yes, it's intentional.  You must be logged in to see it.

Mufa: I'm not sure how the line should be configured in BAMT.  Is there any reason you're still using BAMT?  Are you still doing GPUs or are you on all FPGAs?