Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[d57heinz]

V3 is a thing of beauty!:). Much appreciated!!   Will test 290x's soon.  Past version had similar results as 390x

Best Regards
D57heinz

[1715491150]

1715491150

[1715491150]

1715491150

[1715491150]

1715491150

[1715491150]

1715491150

[1715491150]

1715491150

[1715491150]

1715491150

[mettalmag]

is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?

and also how you guys are getting 60 and 70+ sols on RX480 ? maximum I'm getting on RX480 8g is 55sols

You need modify card BIOS for best results (change memory timings on high clocks).

I did it for ETH on same cards, now I'm getting 61-66 sols with V3 miner, I'm kinda happy

[Gpumanijak]

MSI 390x 84-85, 12x 390x=1000h/s.. GOOD JOB CLAYMORE!!!! ))

[ostalakar]

When I will able to update my linux version   

[adaseb]

So basically it only works best on the newer cards RX470/RX480.

The rest are crashing

[adaseb]

MSI 390x 84-85, 12x 390x=1000h/s.. GOOD JOB CLAYMORE!!!! ))

Let me guess your CPU must be either an i7 or some expensive Xeon processor

[HerrDirektor]

is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?

and also how you guys are getting 60 and 70+ sols on RX480 ? maximum I'm getting on RX480 8g is 55sols

You need modify card BIOS for best results (change memory timings on high clocks).

Sources for the mod what to change and where? A good howto or guide?

See https://www.youtube.com/watch?v=Mwb67g4skGM - very easy instruction

[adaseb]

Don't mod your bioses for the RX series like you did with ETH.

They not only will crash, they will FREEZE your system.

[ioglnx]

MSI 390x 84-85, 12x 390x=1000h/s.. GOOD JOB CLAYMORE!!!! ))

Let me guess your CPU must be either an i7 or some expensive Xeon processor

Well there is no alternative to a good Intel I7 Haswell Gen or Xeon..I personally just have Xeon E51650v3 with free multi and I7s ..lets wait for Zen

[gennadiv]

нoвaя вepcия v 3.0 нe дepжит цeлeвyю тeмпepaтypy зaдaн пapaмeтp tt 65 a пoкaзывaeт   GPU0 t=63C fan=66%, GPU1 t=60C fan=32%, GPU2 t=63C fan=63%
ZEC: 11/09/16-23:31:59 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (93 ms)!
GPU0 t=63C fan=66%, GPU1 t=63C fan=25%, GPU2 t=63C fan=63%
GPU0 t=63C fan=66%, GPU1 t=66C fan=34%, GPU2 t=63C fan=63%

[bit815792215]

do the rx 4-- cards work with 15.12?

[Prelektro]

I have one R9 390 and one  R9 290x and system is crashing after a minute on v3.

EDIT - Screen flicks on and off twice prior to running as if it's changing gpu settings.

Same thing happened with my r9 290 (tried first with -i 0 than -i 1, both crashed my cpu, flickering than 0 H/s).  Restarted my computer and started miner with -i 2 now it's working. I don't know if it's about intensity haven't tested yet with -i 0 & 1 after restart.

[CoinPro69]

Wow that's amazing! Claymore wins!
He is getting now of 2,5% 25~ gh's or more ?
Hm, let me think, that should be around 30.000$++ a day?
50 h's is around 2,50$ right now.

5.000 hs = 250$
5.000.000 = 250000$ by 2,5% = 6250$
= 24h by 2,5% = 36minutes a day for Claymore


Great stuff

My Bro gets 70 hs with his 290 4gb

I'm getting 55-60 hs with my 470 4gb
with 70 Watt and 20% Fan with 74°c


@Haha at Genesis Cloud Miners

[HerrDirektor]

Claymore is MEGA-monster!  
RX480 4G with mod. mem timings = 70-72 sol\sec

Hi,
Can you please explane how you did mod your mem timings in the bios or how it is possible to mod them whitout blowing them up? I try it a cupple time but its more crashing or not starting then working..   do i need to raise them one by one @ the time and always restard them?

See https://www.youtube.com/watch?v=Mwb67g4skGM
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.

[d57heinz]

AMD Cards available: 3
10:39:00:458   2d10   GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:39:00:459   2d10   GPU #1: Hawaii, 8192 MB available, 44 compute units
10:39:00:459   2d10   GPU #1 recognized as Radeon 390X
10:39:00:459   2d10   GPU #2: Hawaii, 4096 MB available, 44 compute units
10:39:00:459   2d10   GPU #2 recognized as Radeon 290X
10:39:00:460   2d10   POOL version
10:39:00:460   2d10   b154
10:39:00:460   2d10   Platform: Windows
10:39:00:468   2d10   start building OpenCL program...
GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:40:05:928   14fc   GPU #1: Hawaii, 8192 MB available, 44 compute units
10:40:05:929   14fc   GPU #2: Hawaii, 4096 MB available, 44 compute units
10:40:05:929   14fc   ZEC - Total Speed: 201.878 H/s, Total Shares: 52, Rejected: 0, Time: 00:00
10:40:05:930   14fc   ZEC: GPU0 49.533 H/s, GPU1 82.655 H/s, GPU2 69.689 H/s
10:40:05:931   14fc   Pool switches: ZEC - 0
10:40:05:932   14fc   Current ZEC pool share target: 0x01555555 (diff: 192H)
10:40:05:962   14fc   GPU0 t=53C fan=55%, GPU1 t=50C fan=20%, GPU2 t=51C fan=55%
10:40:05:964   14fc   



8 core 8350 with win 10 latest drivers

[mettalmag]

is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?

and also how you guys are getting 60 and 70+ sols on RX480 ? maximum I'm getting on RX480 8g is 55sols

You need modify card BIOS for best results (change memory timings on high clocks).

Sources for the mod what to change and where? A good howto or guide?

See https://www.youtube.com/watch?v=Mwb67g4skGM - very easy instruction

I used low voltage mod for all my cards (200+) they were hashing ETH on 29.8 I was kinda glad with it and using much less power

Don't mod your bioses for the RX series like you did with ETH.

They not only will crash, they will FREEZE your system.

they are running for a week or so now and all is good with ETH modded low voltage roms, so far so good

[maxmad_x]

wow.. Great job @Claymore !! You are a hero

[Gpumanijak]

MSI 390x 84-85, 12x 390x=1000h/s.. GOOD JOB CLAYMORE!!!! ))

Let me guess your CPU must be either an i7 or some expensive Xeon processor

i7 4790k on one rig and i5 4690k on second rig )

[Cryptozillah]

v3 470 custom bios
jpg images

v3 480 custom bios
gifs upload

[HerrDirektor]

I used low voltage mod for all my cards (200+) they were hashing ETH on 29.8 I was kinda glad with it and using much less power

Yes, 29mh\s and 40-50W power per card much more profitable than 32mh\s and 150-180W per card )