Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[rpg]

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

Less than 10% difference between miner and pool and you think it's a thief?

Are you a newb miner? Your profile says that you've been around for awhile. You should know that this is normal. +/- 10% is normal.

Yeah I've seen the good the bad and ugly. The only thing that may impact a difference is the ping. I'll never understand why miners don't use message queueing but that's a different story. The difference I'm seeing is consistent on the 24 hour clock on coinmine. Response time is at 70-80ms. I've also had 25 seconds with a ping of 80. I posted about it. With a 180 average (goes from 178 to 182) and taking 3% fee (including reconnecting time) I should have a +/- 3% of 174.6 that should be 168.36 to 179.83. what I see is 158 to 163. On nanopool I'm getting a 300ms ping so as expected the 6 hour average goes down to 147. Will try flypool now where the ping is at 98 ms average.

[aaronsace]

Does anyone know which is stable downvolt  for SAPPHIRE RX480 NITRO OC + for 1342 MHZ GPU and 2000 MHZ for memory?

1350 MHZ 1130mv core
2200 MHZ 1100mv mem

[PsychoDrake]

Does anyone know which is stable downvolt  for SAPPHIRE RX480 NITRO OC + for 1342 MHZ GPU and 2000 MHZ for memory?

1350 MHZ 1130mv core
2200 MHZ 1100mv mem

I have 1200Mhz 950mv
2000Mhz 1000mv

For Zec the mem speed dont affect soo no need to preasure them, the core i put on 1200Mhz because the power draw, i have to pay the power usage and i have the rig in my living room, at 1200MHz 950mv i get a solid 63Degres at around 30%fan, low noise and low temps, at 1300Mhz i have to up the vcore to 1130mv and to stay at same temp the fans go up to 60% and made louder fan noise and draw more power... im getting 165Hs at this setting per card, at 1300 i get 180Hs

[Altcoining]

chicken shit mother fucker

Did uhh, you pay for it? LOL

[sorry2xs]

chicken shit mother fucker

Did uhh, you pay for it? LOL

fuck no just a guest deleted my post about it 

[crazyearner]

Can someone explain why this is happening. V7 works flawless however I have noticed my speeds on one card drop a fair wack.

GPU0 167.471 H/s, GPU1 84.808 H/s for some reason my 2nd 280x card is only doing half hash rate. Any ideas as to what the cause of this is. Thanks in advance.

[adaseb]

Can someone explain why this is happening. V7 works flawless however I have noticed my speeds on one card drop a fair wack.

GPU0 167.471 H/s, GPU1 84.808 H/s for some reason my 2nd 280x card is only doing half hash rate. Any ideas as to what the cause of this is. Thanks in advance.

Dont overclock keep everything stock. Including bios.

[welshminer]

Just wanted to warn everyone.

Please check that you have either changed the default port 3333 for Claymore miner remote control tool, or set -mport -3333 to enable read only mode, or -mport 0 to disable remote tool completely.

There is a thief operating with a wallet t1QBdF2yimDubPeg2BsWCme843GegCWWifK. This lad overrides your configurations via remote tool and makes your rig mine for him. Pretty neat.

Regards.

[citronick]

Just wanted to warn everyone.

Please check that you have either changed the default port 3333 for Claymore miner remote control tool, or set -mport -3333 to enable read only mode, or -mport 0 to disable remote tool completely.

There is a thief operating with a wallet t1QBdF2yimDubPeg2BsWCme843GegCWWifK. This lad overrides your configurations via remote tool and makes your rig mine for him. Pretty neat.

Regards.

CLAYMORE,

Can you set "-mport 0" by default during installation?

[crazyearner]

Can someone explain why this is happening. V7 works flawless however I have noticed my speeds on one card drop a fair wack.

GPU0 167.471 H/s, GPU1 84.808 H/s for some reason my 2nd 280x card is only doing half hash rate. Any ideas as to what the cause of this is. Thanks in advance.

Dont overclock keep everything stock. Including bios.

They are on stock settings and stock bios on my MSI 280x cards other than the default bios from site to fix heating problem that resolved years ago. No OC done and all factory default so got no idea what going on with the 2nd card think gone into limp mode lol.

[xeridea]

Can someone explain why this is happening. V7 works flawless however I have noticed my speeds on one card drop a fair wack.

GPU0 167.471 H/s, GPU1 84.808 H/s for some reason my 2nd 280x card is only doing half hash rate. Any ideas as to what the cause of this is. Thanks in advance.

Dont overclock keep everything stock. Including bios.

They are on stock settings and stock bios on my MSI 280x cards other than the default bios from site to fix heating problem that resolved years ago. No OC done and all factory default so got no idea what going on with the 2nd card think gone into limp mode lol.

Try plugging in a monitor or display emulator to it.

[crazyearner]

Can someone explain why this is happening. V7 works flawless however I have noticed my speeds on one card drop a fair wack.

GPU0 167.471 H/s, GPU1 84.808 H/s for some reason my 2nd 280x card is only doing half hash rate. Any ideas as to what the cause of this is. Thanks in advance.

Dont overclock keep everything stock. Including bios.

They are on stock settings and stock bios on my MSI 280x cards other than the default bios from site to fix heating problem that resolved years ago. No OC done and all factory default so got no idea what going on with the 2nd card think gone into limp mode lol.

k
Try plugging in a monitor or display emulator to it.

I have since reinstalled drivers rebooted seems to done the trick not sure what went on their also had another problem with the miner crashing my system last night so not sure what going on. bugs in matrix I guess. Going to have to keep eye on me system.

[sorry2xs]

if you use risers here is what i have discovered they are crap

[EinsteinTX]

I have several rx480s using Boysie's ROMs, getting 30 MH/s on ETH, using Claymore ETH/DCR 7.4.  I installed Claymore 7.0 for ZEC, getting roughly 160 H/s on the same rx480s.  I decide to switch back to ETH, but now I only get 15 MH/s.  Yes, a 50% drop!  If I install the stock ellesmere ROM, I get 24 Mh/s, and can boost that to 27 Mh/s with tweaks as usual.  However, it seems the ZEC Claymore application 'BREAKS' the hashrate of the Claymore ETH application, if using a modified ROM.  More importantly, this is permanent.  Well, semi-permanent.  I found if I COMPLETELY REINSTALL my OS and switch video cards between workers - essentially completely start from scratch, I can get them back to 30 MH/s.  However, if I run Claymore 7.0 on ZEC just ONCE, they drop back down to 50%.  Anyone have any idea what is getting switched?  I thought it might be registry settings, so I restored the registry.  No good.  The only thing I can find that fixes it is a complete reinstall of the OS, in addition to erasing motherboard BIOS.

[adaseb]

Finally a Bull Flag on ZEC that actually worked.

[adaseb]

I have several rx480s using Boysie's ROMs, getting 30 MH/s on ETH, using Claymore ETH/DCR 7.4.  I installed Claymore 7.0 for ZEC, getting roughly 160 H/s on the same rx480s.  I decide to switch back to ETH, but now I only get 15 MH/s.  Yes, a 50% drop!  If I install the stock ellesmere ROM, I get 24 Mh/s, and can boost that to 27 Mh/s with tweaks as usual.  However, it seems the ZEC Claymore application 'BREAKS' the hashrate of the Claymore ETH application, if using a modified ROM.  More importantly, this is permanent.  Well, semi-permanent.  I found if I COMPLETELY REINSTALL my OS and switch video cards between workers - essentially completely start from scratch, I can get them back to 30 MH/s.  However, if I run Claymore 7.0 on ZEC just ONCE, they drop back down to 50%.  Anyone have any idea what is getting switched?  I thought it might be registry settings, so I restored the registry.  No good.  The only thing I can find that fixes it is a complete reinstall of the OS, in addition to erasing motherboard BIOS.

I switched back and forth on multiple rigs with hacked bios's with both Windows 7 and Windows 10 and I never got this issue.

However you are not the first person that this has happened too.

[sorry2xs]

Finally a Bull Flag on ZEC that actually worked.

now how long will the bull flag last

[luciferdark]

wait new version =)

[AKRO]

if you use risers here is what i have discovered they are crap

I haven't had an issue with them, maybe with another miner or the first few versions of claymore, but I see no difference. at least with powered USB risers.

[Altcoining]

if you use risers here is what i have discovered they are crap

I haven't had an issue with them, maybe with another miner or the first few versions of claymore, but I see no difference. at least with powered USB risers.

No difference here.