Demarsac
|
|
February 16, 2017, 08:06:57 AM |
|
Claymore v.12 in Linux after 12 hours seems pretty stable even with modded Rom
Currently this is the biggest weapon of Claymore vs the Optiminer
In Linux: Claymore is slightly more power hungry vs Optiminer Optiminer gives slightly bigger hashing vs Claymore
But
Claymore's stability is a winner since you don't have to be there to reboot because everything is stuck like in Optiminer (stuck to the point that you can't reboot remotely)
If Claymore breaks the 2-day straight without reboot it's the winner for me
Regardless of that Claymore thanks for a great job and that you always deliver and keep promises This shows character...
|
|
|
|
|
|
|
|
|
Every time a block is mined, a certain amount of BTC (called the
subsidy) is created out of thin air and given to the miner. The
subsidy halves every four years and will reach 0 in about 130 years.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
zzzzzzzzzz
|
|
February 16, 2017, 08:22:13 AM |
|
Claymore v.12 in Linux after 12 hours seems pretty stable even with modded Rom
Currently this is the biggest weapon of Claymore vs the Optiminer
In Linux: Claymore is slightly more power hungry vs Optiminer Optiminer gives slightly bigger hashing vs Claymore
But
Claymore's stability is a winner since you don't have to be there to reboot because everything is stuck like in Optiminer (stuck to the point that you can't reboot remotely)
If Claymore breaks the 2-day straight without reboot it's the winner for me
Regardless of that Claymore thanks for a great job and that you always deliver and keep promises This shows character...
There seems to be a fair sample of miners that have stability issues with Optiminer, and I did have some occasional issues with v1.5, but v1.6.1 just runs like a rock for me on 23 rigs. They don't do soft miner restarts or system reboot/reset. They just run, for days on end. I really couldn't be more pleased, although I can't account for why my configuration (Ubuntu) is so stable, when others' are not.
|
|
|
|
Demarsac
|
|
February 16, 2017, 09:21:11 AM |
|
Claymore v.12 in Linux after 12 hours seems pretty stable even with modded Rom
Currently this is the biggest weapon of Claymore vs the Optiminer
In Linux: Claymore is slightly more power hungry vs Optiminer Optiminer gives slightly bigger hashing vs Claymore
But
Claymore's stability is a winner since you don't have to be there to reboot because everything is stuck like in Optiminer (stuck to the point that you can't reboot remotely)
If Claymore breaks the 2-day straight without reboot it's the winner for me
Regardless of that Claymore thanks for a great job and that you always deliver and keep promises This shows character...
There seems to be a fair sample of miners that have stability issues with Optiminer, and I did have some occasional issues with v1.5, but v1.6.1 just runs like a rock for me on 23 rigs. They don't do soft miner restarts or system reboot/reset. They just run, for days on end. I really couldn't be more pleased, although I can't account for why my configuration (Ubuntu) is so stable, when others' are not. Yeah... I tried 1.6.1 and also 1.6.2 and i always have an issue in 10 hours, or 5 hours or 15 hours (it's random) I am on ubuntu (14.04) also but i haven't been able to keep it steady for more than 24 hours That's why i am checking Clay now to see if it gives me the stability i am lacking from Opti... You are lucky to have Opti stable
|
|
|
|
ntrader
|
|
February 16, 2017, 10:02:11 AM |
|
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
This is bad, people have a lot of Tonga cards in hands and wait for speedup for these GPUs
|
|
|
|
shadabahmed
|
|
February 16, 2017, 10:05:04 AM |
|
guys which pool is giving good earning?
|
Am I spamming? Report me!
|
|
|
Dowper
|
|
February 16, 2017, 11:22:03 AM |
|
MSI Radeon RX 470 DirectX 12 Radeon RX 470 ARMOR 4G OC 4GB 256-Bit
Is this a decent GPU. $169 Thanks
This is a good GPU. The MSI RX470 Gaming X does have 1 more gb ram and has more clock with a cost of $199. I have MSI RX470 Gaming X and really like it and would buy it again. That one is not a Gaming X, its the ARMOR Series which is slightly lower end. However for ETH and ZEC Mining I don't think it will make a difference. Maybe it varies in games. But in my opinion, I looked at the ARMOR and compared it to the GAMING X and the ARMOR seems like cheap crap build quality wise. Same with that ASUS 470 STRIX. Its good that they have long warranties at least. yeah agreed, but its significantly cheaper, 3 year warranty. dont know what kind of mem is inside though, gonna be a surprise. cheaper version of the gaming X but for me its about 20% less expensive.. Can someone share his hashrate on ETH and ZEC with MSI RX 470 ARMOR 4G OC?
|
|
|
|
coinzoid
|
|
February 16, 2017, 11:37:28 AM |
|
I'm currently using AMD 16.9.x drivers and modded bios for Rx 480 nitro 1342 boost clock model. Although others are stating getting 300H/s, I reached 285H/s max with this driver and test mode on Windows.
When I tried to install most recent AMD driver, my GPUs are not being detected. I believe this is due to enforced signatures by Windows.
Can someone tell me if I should disable test mode before installing more recent AMD driver?
Thanks
|
|
|
|
pwpwpw
|
|
February 16, 2017, 11:56:25 AM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers
|
|
|
|
Demarsac
|
|
February 16, 2017, 12:24:55 PM |
|
I'm currently using AMD 16.9.x drivers and modded bios for Rx 480 nitro 1342 boost clock model. Although others are stating getting 300H/s, I reached 285H/s max with this driver and test mode on Windows.
When I tried to install most recent AMD driver, my GPUs are not being detected. I believe this is due to enforced signatures by Windows.
Can someone tell me if I should disable test mode before installing more recent AMD driver?
Thanks
Use 16.10.1 drivers With modded vbios i get 315 H/s average With stock rom i get 305 H/s average
|
|
|
|
thesaltonsea
Newbie
Offline
Activity: 64
Merit: 0
|
|
February 16, 2017, 01:05:42 PM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers My 280x rig works only with -i 2 on all cards. Anything more and it crash.
|
|
|
|
Socket54
|
|
February 16, 2017, 01:23:46 PM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers This is what was happening to me as well. Something about the Atikmdag crashing, which i believe is the driver. So what i did is reinstall fresh driver after wiping old ones. Then run my cards without any kind of OC software running. Since then i am stable.
|
Laugh Smile and Love
|
|
|
pwpwpw
|
|
February 16, 2017, 01:26:14 PM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers This is what was happening to me as well. Something about the Atikmdag crashing, which i believe is the driver. So what i did is reinstall fresh driver after wiping old ones. Then run my cards without any kind of OC software running. Since then i am stable. you used the same driver 15.12? what is your -i setting? gonna try -i 2 now and when i come back home, will reinstall drivers, i'm using DDU to remove previous ones.
|
|
|
|
ownmind
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 16, 2017, 01:26:38 PM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers My 280x rig works only with -i 2 on all cards. Anything more and it crash. Me too. Have 1 rig with 3x280x, for it works only -i 2. But my mixxed farm with 3x7970,280x,290x are rock stable with different -i. I'm confused.
|
|
|
|
stealth2600
Newbie
Offline
Activity: 35
Merit: 0
|
|
February 16, 2017, 02:07:15 PM |
|
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
This is bad, people have a lot of Tonga cards in hands and wait for speedup for these GPUs Agreed, I'm hoping Claymore will take care of this and spend some time working on the Tonga chipset. It's really popular and it's been around a long time, a lot of folks run them like you said.
|
|
|
|
roony
Full Member
Offline
Activity: 196
Merit: 100
Did you see the roonies on him???
|
|
February 16, 2017, 02:16:19 PM |
|
Claymore, you could try to reach 450 h/s for 390x
|
Don't be rude, stop staring at my brows.
|
|
|
volapyk
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 16, 2017, 02:22:54 PM |
|
There seems to be an issue with -li mode. I have tested out -li 2 and -li 8 for alle cards (unmodded rx 480)
I get the same sol/s reporting rate when running with -i 6. But far lass power use. But in the pool I only get about half the sol/s when running with -li 2. Could there be a reporting error when running low intensity mode?
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
February 16, 2017, 02:27:59 PM |
|
There seems to be an issue with -li mode. I have tested out -li 2 and -li 8 for alle cards (unmodded rx 480)
I get the same sol/s reporting rate when running with -i 6. But far lass power use. But in the pool I only get about half the sol/s when running with -li 2. Could there be a reporting error when running low intensity mode?
yes , its a bug confirmed by Claymore. See https://bitcointalk.org/index.php?topic=1670733.msg17848866#msg17848866
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
shadabahmed
|
|
February 16, 2017, 03:26:14 PM |
|
guys which pool is giving good earning?
|
Am I spamming? Report me!
|
|
|
Socket54
|
|
February 16, 2017, 03:28:45 PM |
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers This is what was happening to me as well. Something about the Atikmdag crashing, which i believe is the driver. So what i did is reinstall fresh driver after wiping old ones. Then run my cards without any kind of OC software running. Since then i am stable. you used the same driver 15.12? what is your -i setting? gonna try -i 2 now and when i come back home, will reinstall drivers, i'm using DDU to remove previous ones. I have RX 480's so i use the newer drivers, -i 4 for each card. Ive done higher but the temps were about 80C and im trying to stay in the 60-70C range. Working great so far
|
Laugh Smile and Love
|
|
|
roony
Full Member
Offline
Activity: 196
Merit: 100
Did you see the roonies on him???
|
|
February 16, 2017, 03:46:10 PM |
|
guys which pool is giving good earning?
Suprnova is the best pool i think
|
Don't be rude, stop staring at my brows.
|
|
|
|