Corerj
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 21, 2017, 10:16:18 PM |
|
Sadly v12 and v12.1 are too unstable here (already tried to low intensity)...rig with 3x 7990 and 1x R9 295x2, under win10 with cat 15.12...other versions and optiminer run fine...
|
|
|
|
laik2
|
|
February 21, 2017, 10:51:40 PM |
|
Anyone else notice that v12/12.1 is reporting about a 5% higher hashrate than pool(flypool) for polaris based cards?
For example a 470 is reporting 280H/s miner side, and 260H/s poolside average. With 2% fee should be reporting ~275H/s.
Can anyone else on flypool with polaris cards confirm...want to see if its just me or a pool related issue.
Put the miner on local proxy and see what it shows about shares/speed.
|
|
|
|
grendel25
Legendary
Offline
Activity: 2296
Merit: 1031
|
|
February 22, 2017, 03:42:02 AM Last edit: February 22, 2017, 04:11:43 AM by grendel25 |
|
Since V12 it seems to run for 3+ hours and then the computer starts rebooting in 5-15 cycles... and then it ran for 45 minutes and then for over an hour again... weirdness
Further down this road and the "stability" seemed to get worse. However, in the end I can't say that it was mainly attributed to v12+ or something else. I ended up getting several blue screens and then finally doing a reset. I'm back to an apparent "stable" condition but it has only been an hour. Also... I'm running a 3-year old 850 Watt power supply and measuring up to 815 watts with my kill-a-watt at the wall. That's with 4x 7950's in the rig. I measure around 100 Watts before the miner turns on so I guess that would average around 175 watts per card. This is without any undervolting. I tried undervolting along with this whole stability troubleshooting process and I wasn't successful at all. I may try again since the reset of Windows 10 OS seems to have made things more stable. So what does the 850 watt power supply mean anyway? Should I be able to pull up to 850 at the wall and be fine? I read elsewhere in this thread (I think) that you could pull upwards of what your power supply is rated for and this gets into the realm of efficiency. Regardless... I'm jonesing for a new PSU so that I'm not so near the apparent threshold. The PSU rating is for the DC side (inside the system), not the AC side (wall). So, if the PSU is 90% efficient, it should max out at (100/90) * 850 = 944 watts at the wall. I'm back to the random restarts I'm kind of thinking it's the power supply but if I still have over 100 watts overhead I'd think it would be okay. But that's still a lot of work on a 3-4 year old power supply. If you have the option, you could move a card off that rig and see if stability returns. Just a thought. I removed a card from the system today and it crashed with 12.1. I'm going all the way back to 9.2 now to see how it does. I'm still thinking this is a power supply issue. 9.2 was the last version I was on before I went up to 12.1. I was also running 3 video cards for the majority of the time on 9.2 but I did run 4 cards with no issues for nearly a week before I started having reboot issues which is when I started looking to see if there were newer versions of the miner that might 'help'. Foolish of me... this is looking more and more like a power supply problem. Now I'm seeing people say they try to stay around 70% of what' their power supply is rated. With 3 cards on 12.1 I was seeing around 560 Watts at the wall which is close to that 70% range some others were saying they spec for. Hoping I can get a 1200 Watt gold PSU in a few months and then be back up to full speed. ugh patience is not my strength >< Edit: crossing my fingers this will solve some problems: I just ordered this thing: http://www.parallelminer.com/product/gpu-mining-power-supply-kit-hp-1200-watt-80-gold/
|
|
|
|
oslak
|
|
February 22, 2017, 04:32:55 AM |
|
Anyone else notice that v12/12.1 is reporting about a 5% higher hashrate than pool(flypool) for polaris based cards?
For example a 470 is reporting 280H/s miner side, and 260H/s poolside average. With 2% fee should be reporting ~275H/s.
Can anyone else on flypool with polaris cards confirm...want to see if its just me or a pool related issue.
Put the miner on local proxy and see what it shows about shares/speed. what local proxy?
|
|
|
|
zzzzzzzzzz
|
|
February 22, 2017, 04:43:19 AM |
|
Since V12 it seems to run for 3+ hours and then the computer starts rebooting in 5-15 cycles... and then it ran for 45 minutes and then for over an hour again... weirdness
Further down this road and the "stability" seemed to get worse. However, in the end I can't say that it was mainly attributed to v12+ or something else. I ended up getting several blue screens and then finally doing a reset. I'm back to an apparent "stable" condition but it has only been an hour. Also... I'm running a 3-year old 850 Watt power supply and measuring up to 815 watts with my kill-a-watt at the wall. That's with 4x 7950's in the rig. I measure around 100 Watts before the miner turns on so I guess that would average around 175 watts per card. This is without any undervolting. I tried undervolting along with this whole stability troubleshooting process and I wasn't successful at all. I may try again since the reset of Windows 10 OS seems to have made things more stable. So what does the 850 watt power supply mean anyway? Should I be able to pull up to 850 at the wall and be fine? I read elsewhere in this thread (I think) that you could pull upwards of what your power supply is rated for and this gets into the realm of efficiency. Regardless... I'm jonesing for a new PSU so that I'm not so near the apparent threshold. The PSU rating is for the DC side (inside the system), not the AC side (wall). So, if the PSU is 90% efficient, it should max out at (100/90) * 850 = 944 watts at the wall. I'm back to the random restarts I'm kind of thinking it's the power supply but if I still have over 100 watts overhead I'd think it would be okay. But that's still a lot of work on a 3-4 year old power supply. If you have the option, you could move a card off that rig and see if stability returns. Just a thought. I removed a card from the system today and it crashed with 12.1. I'm going all the way back to 9.2 now to see how it does. I'm still thinking this is a power supply issue. 9.2 was the last version I was on before I went up to 12.1. I was also running 3 video cards for the majority of the time on 9.2 but I did run 4 cards with no issues for nearly a week before I started having reboot issues which is when I started looking to see if there were newer versions of the miner that might 'help'. Foolish of me... this is looking more and more like a power supply problem. Now I'm seeing people say they try to stay around 70% of what' their power supply is rated. With 3 cards on 12.1 I was seeing around 560 Watts at the wall which is close to that 70% range some others were saying they spec for. Hoping I can get a 1200 Watt gold PSU in a few months and then be back up to full speed. ugh patience is not my strength >< Edit: crossing my fingers this will solve some problems: I just ordered this thing: http://www.parallelminer.com/product/gpu-mining-power-supply-kit-hp-1200-watt-80-gold/ Perhaps you've already done this, but you could try optiminer v1.6.2, which has been a rock, for me, just to eliminate the miner as the possible problem.
|
|
|
|
FFI2013
|
|
February 22, 2017, 06:13:05 AM |
|
anyone notice that 390x show 500 hs for the first 30 sec then it steadily drops. 12.1. Is that potential or just that the rounds havent avg out. Most of time it started way short and worked its way up not other way around.. Just wondering Edit for what its worth it does it on all cards. even 290x shows 450 h/s ZEC - Total Speed: 2793.691 H/s, Total Shares: 1, Rejected: 0, Time: 00:00 08:46:22:493 1894 ZEC: GPU0 465.998 H/s, GPU1 477.434 H/s, GPU2 488.427 H/s, GPU3 398.163 H/s, GPU4 428.854 H/s, GPU5 511.049 H/s GPU #0: Hawaii 08:46:22:306 1894 GPU #1: Hawaii 08:46:22:337 1894 GPU #2: Hawaii 08:46:22:399 1894 GPU #3: Hawaii 08:46:22:415 1894 GPU #4: Hawaii 08:46:22:431 1894 GPU #5: Hawaii
BR yes it does it to my 390 and 290 more on the 390 it starts out higher than drop down
|
|
|
|
zzzzzzzzzz
|
|
February 22, 2017, 06:43:08 AM |
|
anyone notice that 390x show 500 hs for the first 30 sec then it steadily drops. 12.1. Is that potential or just that the rounds havent avg out. Most of time it started way short and worked its way up not other way around.. Just wondering Edit for what its worth it does it on all cards. even 290x shows 450 h/s ZEC - Total Speed: 2793.691 H/s, Total Shares: 1, Rejected: 0, Time: 00:00 08:46:22:493 1894 ZEC: GPU0 465.998 H/s, GPU1 477.434 H/s, GPU2 488.427 H/s, GPU3 398.163 H/s, GPU4 428.854 H/s, GPU5 511.049 H/s GPU #0: Hawaii 08:46:22:306 1894 GPU #1: Hawaii 08:46:22:337 1894 GPU #2: Hawaii 08:46:22:399 1894 GPU #3: Hawaii 08:46:22:415 1894 GPU #4: Hawaii 08:46:22:431 1894 GPU #5: Hawaii
BR Actually Claymore specifically states that it takes 3000 rounds (his words) to get an accurate hash rate. I believe the miner states that in the log, when the miner first starts.
|
|
|
|
Gataway
Newbie
Offline
Activity: 54
Merit: 0
|
|
February 22, 2017, 07:33:42 AM |
|
Sadly v12 and v12.1 are too unstable here (already tried to low intensity)...rig with 3x 7990 and 1x R9 295x2, under win10 with cat 15.12...other versions and optiminer run fine...
Can I mine dash with claymore? how ? I have 7990 and 280x some help will be appreciate!!! No Dash. That is minable with ASIC.
|
|
|
|
orbital_station1
Newbie
Offline
Activity: 24
Merit: 0
|
|
February 22, 2017, 08:35:20 AM |
|
Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx
Also what drivers give best results for R9 390s?
|
|
|
|
NameTaken
|
|
February 22, 2017, 08:42:58 AM |
|
Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx
Also what drivers give best results for R9 390s?
sudo apt install -t jessie-backports fglrx-driver=1:15.12-2~bpo8+3
|
|
|
|
|
tkredmond
Newbie
Offline
Activity: 68
Merit: 0
|
|
February 22, 2017, 10:05:47 AM |
|
Now that we have a faster CM version, Zcash is going down the drain Oh man, i hope it stops at 0.20 at least. Anything below, and it will make it unprofitable, and it's really pitty cause it has the potential to be a key player.
|
|
|
|
crazyq
Newbie
Offline
Activity: 12
Merit: 0
|
|
February 22, 2017, 10:40:52 AM |
|
Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx
Also what drivers give best results for R9 390s?
sudo apt install -t jessie-backports fglrx-driver=1:15.12-2~bpo8+3 E: The value 'jessie-backports' is invalid for APT::Default-Release as such a release is not available in the sources ??
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
February 22, 2017, 10:56:26 AM |
|
anyone notice that 390x show 500 hs for the first 30 sec then it steadily drops. 12.1. Is that potential or just that the rounds havent avg out. Most of time it started way short and worked its way up not other way around.. Just wondering Edit for what its worth it does it on all cards. even 290x shows 450 h/s ZEC - Total Speed: 2793.691 H/s, Total Shares: 1, Rejected: 0, Time: 00:00 08:46:22:493 1894 ZEC: GPU0 465.998 H/s, GPU1 477.434 H/s, GPU2 488.427 H/s, GPU3 398.163 H/s, GPU4 428.854 H/s, GPU5 511.049 H/s GPU #0: Hawaii 08:46:22:306 1894 GPU #1: Hawaii 08:46:22:337 1894 GPU #2: Hawaii 08:46:22:399 1894 GPU #3: Hawaii 08:46:22:415 1894 GPU #4: Hawaii 08:46:22:431 1894 GPU #5: Hawaii
BR Actually Claymore specifically states that it takes 3000 rounds (his words) to get an accurate hash rate. I believe the miner states that in the log, when the miner first starts. Yes 3000 rounds. But usually it would start a bit short then work it's way up. Never in all the versions have I seen it start high and work down. Just thought maybe we had some decent upside left. Thanks FFI2013 for the confirmation. BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
Stealth8368
|
|
February 22, 2017, 11:39:37 AM |
|
Have noticed rx480 hashing over 400s/s when starting miner then correcting down to 320s/s seems to be opposite of previous releases,some of my rigs start with 0s/s before climbing to 320s/s so don't think we can read to much into it,running windows and stable 24 hours so far
|
|
|
|
NameTaken
|
|
February 22, 2017, 11:43:10 AM |
|
Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx
Also what drivers give best results for R9 390s?
sudo apt install -t jessie-backports fglrx-driver=1:15.12-2~bpo8+3 E: The value 'jessie-backports' is invalid for APT::Default-Release as such a release is not available in the sources ?? sed -i '/main$/s/$/ contrib non-free/g' /etc/apt/sources.list grep "\-updates" /etc/apt/sources.list | sed 's/updates/backports/' > /etc/apt/sources.list.d/backports.list
|
|
|
|
gennadiv
|
|
February 22, 2017, 12:15:41 PM |
|
Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx
Also what drivers give best results for R9 390s?
sudo apt install -t jessie-backports fglrx-driver=1:15.12-2~bpo8+3 E: The value 'jessie-backports' is invalid for APT::Default-Release as such a release is not available in the sources ?? sed -i '/main$/s/$/ contrib non-free/g' /etc/apt/sources.list grep "\-updates" /etc/apt/sources.list | sed 's/updates/backports/' > /etc/apt/sources.list.d/backports.list http://support.amd.com/ru-ru/download/desktop/previous?os=Windows%207%20-%2064
|
|
|
|
Realetim
Newbie
Offline
Activity: 30
Merit: 0
|
|
February 22, 2017, 01:45:35 PM |
|
What is the has rate increase of 12.1 over 12?
|
|
|
|
flekkelek
|
|
February 22, 2017, 02:14:02 PM |
|
What is the has rate increase of 12.1 over 12?
175 => 195 on 380x stock clocks
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
February 22, 2017, 02:35:19 PM |
|
What is the has rate increase of 12.1 over 12?
175 => 195 on 380x stock clocks LESS THAN 5% HASHRATE INCREASE-- It varies some per card and settings, but there is a real increase in hash rate. My 280X cards mine at 310 Sols/s, on v12.0 the were mining at 295 Sols/s. R9 Fury cards mine at 460 Sols/s, on v12.0 they were mining at 450 Sols/s. --scryptr
|
|
|
|
|