Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[shadabahmed]

sapphire rx 470 4GB reffrence clock setting please

[ujang1]

Oh, the new version, we need to try what changes will be

[yellowtie]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

 Model                 Sol/sec   Power  
----------------------------------------
 7950                  285       160    
 7970M 2GB             145       100
 7970                  300       215
 7990                  600       375      
 R9 270                180       180    
 R9 280                280       200
 R9 280x               310       230    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                230       200    
 R9 390                411       250    
 R9 390x               410       280    
 RX 460                150        60
 RX 470 4Gb            299       150    
 RX 480                300       150    
 R9 Fury Nano          450       185    
 R9 Fury X             455       225    
 R9 Fury Nitro         470       250    

[HSLFunding]

This is my first post, but I have been using this forum for a while.  I currently have an Alienware M18 R2 with two 7970m's. These cards are rated at 100W a piece and I am currently pulling right around 300Sol/s with 12.4 but I had to make a configuration change.  When I moved from 12.2 to 12.4 the default intensity was changed from 3 to 4, as my cards only have 2GB of memory on them this intensity was too high and I dropped to about 200Sol/s. For ALL revision before this that I have used, the intensity was set to 3 by default.  So look to see if your intensity has changed if you are getting lower Sol/s then you were with earlier revisions.  Also, going from 12.2 to 12.4 with intensity set at 3 I went from about a peak of 285 Sol/s to, as stated above, about 300 Sol/s.

Thank you Claymore for all your work and I gladly donate that dev Fee.

HSL

[HSLFunding]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

----------------------------------------
 Model                 Sol/sec   Power  
 7950                  270       250    
 7970                  292       270    
 R9 270                180       180    
 R9 280x               323       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                200       200    
 R9 390                411       250    
 R9 390x               440       280    
 RX 470 4Gb            299       150    
 RX 480                330       150    
 R9 Fury Nano          435       275    
 R9 Fury X             455       275    
 R9 Fury Nitro         470       275    

Model           Sol/sec      Power
7970M 2GB    145           100

A 7970M is equivalent to a 7870 desktop clocked at 850/1200 and I run these at stock speeds as my laptops cooling power is limited and the memory will not clock even 5 more Mhz
Settings for mining are all standard but intensity is set to -i 3.
[EDIT]
I am also running drivers 17.3.1, sometimes mining will only start on one card or one of the cards is very low, around 50 sol/sec and to fix it:
1. I stop mining.
2. Stop MSI Afterburner or any monitoring software I have.
3. Enable Crossfire.
4. Disable Crossfire.
5. Startup Mining and I have full speed on both cards again.

I have never tried re-enabling my hardware monitors as it just adds complexity I don't want to deal with.

[rpg]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

----------------------------------------
 Model                 Sol/sec   Power  
 7950                  270       250    
 7970                  292       270    
 R9 270                180       180    
 R9 280x               323       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                200       200    
 R9 390                411       250    
 R9 390x               440       280    
 RX 470 4Gb            299       150    
 RX 480                330       150    
 R9 Fury Nano          435       275    
 R9 Fury X             455       275    
 R9 Fury Nitro         470       275    

7950 depends. I have 2 doing 285 with 160 watts and a gigabyte doing 320 with the same watts.fury nitro does 485 at 1040 oc.  With clock speed does 465 @ 250 watts. Haven't measured the oc watts

Edit: make it 500 @ 1190. 55c with fan at 65%

[Mastker]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

----------------------------------------
 Model                 Sol/sec   Power  
 7950                  270       250    
 7970                  292       270    
 R9 270                180       180    
 R9 280x               323       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                200       200    
 R9 390                411       250    
 R9 390x               440       280    
 RX 470 4Gb            299       150    
 RX 480                330       150    
 R9 Fury Nano          435       275    
 R9 Fury X             455       275    
 R9 Fury Nitro         470       275    

I think your R9 nano power is too high. It is about 200W for 435.

[Dr_Victor]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

My MSI R9 380 2G makes 230 Sol w/o over w/c

[citronick]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

----------------------------------------
 Model                 Sol/sec   Power  
 7950                  270       250    
 7970                  292       270    
 R9 270                180       180    
 R9 280x               323       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                200       200    
 R9 390                411       250    
 R9 390x               440       280    
 RX 470 4Gb            299       150    
 RX 480                330       150    
 R9 Fury Nano          435       275    
 R9 Fury X             455       275    
 R9 Fury Nitro         470       275    

I think your R9 nano power is too high. It is about 200W for 435.

even lower when you use a custom rom

[omshree]

Nano 185 @470hash

[shadabahmed]

sapphire rx 470 4GB reffrence clock setting please

[thesaltonsea]

for jddebug

What is your intesity setting i am using sapphire r9 280x and MSI 7970 lighting and have found that if I go for intesity higher than -i 2 my rigs start going unstable (restarting,hanging etc..) for the 7970 with downvolt to 1069 mV on the GPU core, on the r9 280 x I can do -i 4 and be stable with the downvolt of 980 mV.

7970 downvolt stable -i 2 get 290 to 300 h/s on claymore 12.4
r9 280 downvolt stable -i 4 get 290 to 300 h/s on claymore 12.4 

All cards are running asm option
Hope this helps

This did help get me where I wanted to be. I was able to use -i 6 for my 7970's and they are stable so far.

Thank you.

Hi,
so you undervolt them and now they are stabe with more then -i 2 ?

No, I made changes that djolep07 made me think about.

I have voltage set to about the same as djolep07.

I have this in my config:

-zpool equihash.usa.nicehash.com:3357
-zwal (my wallet address).r10
-zpsw z
-allpools 1
-i 6
-asm 1

(I had -i 8. Even though the miner sets intensity to 7 that is to high and it made everything slower. I believe that was the problem.)

I didn't have -asm 1 in my config. I think the miner was automatically using it anyway but now I set it to use it for sure.

Additionally, I noticed that my start.bat file didn't have the extra parameters in it anymore. I may have missed that when I did a previous update.

So now it has all this in it:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Getting a nice 300+ H/s from each card now.

So you are using more than -i 2 on 7970 cards and it is not crashing ?

Thats correct. I am using -i 6 and it is completely stable.

Hi,

im now testing with your settings and -i 4 and its stable for more than 24h. What clocks and vcore do you use for the 7970s ?

[Faboo005]

Does anybody know how much system RAM volume matters to intensities?

I have various cards spread over a few rigs. I've noticed some reduce intensity on the basis of not enough memory, where other rigs with the same GPUs dont. I assumed this was linked to GPU memory, but the cards are the same with the same 3gb. So is this reduction actually linked to system RAM volume?

[kinsik]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

----------------------------------------
 Model                 Sol/sec   Power  
 7950                  270       250    
 7970                  292       270    
 R9 270                180       180    
 R9 280x               323       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                200       200    
 R9 390                411       250    
 R9 390x               440       280    
 RX 470 4Gb            299       150    
 RX 480                330       150    
 R9 Fury Nano          435       275    
 R9 Fury X             455       275    
 R9 Fury Nitro         470       275    

Does rx 480 really make 330 sols?

[Faboo005]

Does rx 480 really make 330 sols?

I get more like 300 on stock settings with stock bios, 8GB card, Claymore 12.4, i8. Probably could be pushed to 330 with a bit of work.

[LugLoper]

Hi Claymore thx for a great software... one question though, I'm using a AMD RX 460 oc 2gb edition GPU (got it for my birthday)
and I'm using the 17.2.1 crimson driver (Is that a problem?, should I change to earlier drivers like 16.5, or does the 17.2 drivers sufice?)

I get speeds of over 150 sol/s with your 12.3 version (same card) compared to other miners(software) your's is worth the miner fee!

Thanks.

[IOTUSA]

Does rx 480 really make 330 sols?

I get more like 300 on stock settings with stock bios, 8GB card, Claymore 12.4, i8. Probably could be pushed to 330 with a bit of work.

Whats the hash rate disparity between 8 and 4 GB memory on the 480 cards?

[espressodelisi]

12.4 was not stable for my rig. I had not respoding gpu error and lockups.
I have 3x r9 280x and one r9 270. running linux.

Back to 12.3 and its stable now. and no noticable speed difference.

[br2459]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

 Model                 Sol/sec   Power  
----------------------------------------
 7950                  285       160    
 7970M 2GB             145       100
 7970                  292       270    
 R9 270                180       180    
 R9 280                280       300
 R9 280x               310       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                230       200    
 R9 390                411       250    
 R9 390x               410       280    
 RX 460                150        60
 RX 470 4Gb            299       150    
 RX 480                300       150    
 R9 Fury Nano          450       185    
 R9 Fury X             455       225    
 R9 Fury Nitro         470       250    

My 7970 with Hynix Mem is running about 313H/s but about 225W. Its a modified BIOS but no custom straps.

[Nauticalam]

Hi!
Ive just created table with hashrate and power consumption for most popular amd videocards, please help me fix it.
PM me or write here if have another value(s) for any card.

Code:

 Model                 Sol/sec   Power  
----------------------------------------
 7950                  285       160    
 7970M 2GB             145       100
 7970                  292       270    
 R9 270                180       180    
 R9 280                280       300
 R9 280x               310       300    
 R9 290                340       250    
 R9 290 flash to 390   370       250    
 R9 380                230       200    
 R9 390                411       250    
 R9 390x               410       280    
 RX 460                150        60
 RX 470 4Gb            299       150    
 RX 480                300       150    
 R9 Fury Nano          450       185    
 R9 Fury X             455       225    
 R9 Fury Nitro         470       250    

My 7970 with Hynix Mem is running about 313H/s but about 225W. Its a modified BIOS but no custom straps.

What do you mean "a modified BIOS but no custom straps."?